Top 10 12.5mm Drill Bit – Jobber Drill Bits

As an Amazon Associate I earn from qualifying purchases.

1. uxcell

#ad

Uxcell Reduced Shank Twist Drill Bits 12.5mm High Speed Steel 4341 with 12.5mm Shank 1 Pcs

#ad
uxcell #ad - Versatile uses: for use in a wide range of stainless steel, copper, aluminum alloy, iron, brass and metal materials. Features: cutting edge diameter : 12. 5mm / 049"; cutting edge length: 102mm / 049"; shank diameter : 12.

5mm / 4. 02"; total length : 150mm / 5. 91". High speed steel tool: high-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Reduced shank: reduced shank drill expands the size range capacity of a portable drill chuck. Black & gold oxide finish: premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Common flute and overall length for minimal adjustment during tool changes.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera19102500ux0146

2. uxcell

#ad

Uxcell Reduced Shank Twist Drill Bits 12.5mm High Speed Steel 4341 with 12.5mm Shank 2 Pcs

#ad
uxcell #ad - High speed steel tool: high-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

Black & gold oxide finish: premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Common flute and overall length for minimal adjustment during tool changes. Reduced shank: reduced shank drill expands the size range capacity of a portable drill chuck. Features: cutting edge diameter : 12. 5mm / 049"; shank diameter : 12. 5mm / 4. 02"; total length : 150mm / 049"; cutting edge length: 102mm / 5. 91". Versatile uses: for use in a wide range of stainless steel, iron, aluminum alloy, copper, brass and metal materials.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera19102500ux0147

3. Utoolmart

#ad

Utoolmart 12.5mm Twist Drill High Speed Steel Bit HSS-4241 for Steel Aluminum Alloy 1 pcs

#ad
Utoolmart #ad - Application- perfect for stainless steel, aluminum alloy, copper, as well suit for wood, plastic. Feature - nitrogen oxidation and Heat Treatment can increase the hardness and corrosion resistant of twist drill bit. Material- twist drill is made of high speed steel, High speed steel construction is designed for durability and extended tool life. Special design- fully ground spiral groove design clears particles quickly, decreases friction and heat for faster drilling performance. Parameter- bit diameter:12. 5mm / 049 inch; shank Diameter: 12. 5mm / 049 inch.
BrandUtoolmart #ad
ManufacturerUtoolmart #ad
Part NumberUT190828Z-0091

4. Utoolmart

#ad

Utoolmart 3pcs 12.5mm Twist Drill with Titanium Coated High Speed Steel Bit HSS CO for Steel,Copper,Aluminum Alloy

#ad
Utoolmart #ad - Application- perfect for stainless steel, copper, plastic. Suitable for home diy, as well suit for wood, aluminum alloy, and General Building/Engineering Use. Material- m35 hss with co, titanium Coated with titanium coating for capability and durability. Feaeture- flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process. Package content- 3 x twist Drill Bit. Parameter- shank / cutting edge diameter : 12. 5mm/049" ;total length : 151mm/5. 89".
BrandUtoolmart #ad
ManufacturerUtoolmart #ad
Part NumberUT190821M-0070

5. Drill America

#ad

DWDRSD12.5MM 12.50mm Reduced Shank High Speed Steel Drill Bit with 1/2" Shank, DWDRSD Series, Drill America

#ad
Drill America #ad - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Ideal for drilling in low and medium tensile strength materials. When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.
BrandDrill America #ad
ManufacturerDrill America #ad
Height0.4 Inches
Length8.8 Inches
Weight0.2 Pounds
Width0.9 Inches
Part NumberDWDRSD12.5MM
ModelDWDRSD12.5MM

6. uxcell

#ad

Uxcell Brad Point Drill Bits for Wood 12.5mm x 70mm Forward Turning HSS for Woodworking Carpentry Drilling Tool

#ad
uxcell #ad - The optimized spiral design enables better guidance of the drill from start to finish. Beveled edge leads to clean drilling of the diameter without any deviation. Cutting diameter: 12. 5mm/05 inch; total Length: 70mm/2. 8 inches. Shank diameter: 10mm/04 inch; edge Length: 6. 8mm/03 inch. The brad point drill bit is suitable for drilling hardboard, plywood, chipboard and all natural hard and softwood.
Branduxcell #ad
Manufactureruxcell #ad
Height0.59 Inches
Length3.54 Inches
Width0.59 Inches
Part NumberB07MSKQY7F

7. uxcell

#ad

Uxcell Cemented Carbide Twist Drill Bits 12.5mm Metal Drill Cutter for Stainless Steel Copper Aluminum Zinc Alloy Iron 2 Pcs

#ad
uxcell #ad - Features: milled u-flutes with deep-cut spiral delivers fast material removal. Use for: drilling clean, wood, brass, plastic, steel, accurate holes in sheet metal, aluminum, copper, stainless steel and cast iron.

Cemented carbide tip: 12. 5mm twist drill bits are made of cemented carbide tip for long service life, more sharp and durable than others. Suitable for drilling in tough metal, including heavy-duty abrasive alloy and hardened steel. Round shank design: round shank twist drill bit can work with a electric drill Excluding in the item. Use note: please use low speed when drilling and note the temperature of carbide tip is not too high for extending drill bit life.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera19121700ux0898

8. LingGan

#ad

5% Cobalt M35 Grade HSS-CO, 12.5mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 1pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron

#ad
LingGan #ad - The cutting edge Is Hardened And Honed For Sharpness. For metalworking - particularly successful in cutting through hard metalshardness less than Hrc38° Such As Stainless Steel And Cast Iron, Although They Can Be Used For Softer Materials Like Copper And Aluminium, Too.

Not for hardened Steel And High Carbon Steel. Straight shank and 135° point angle - straight shank for standard drill chucks And Collet Chuck To Hold Firmly, Assuring Accurate Centering; Helical Flute For Swarf To Easily Get Out; Ideal For General Purpose Drilling Applications. Flutes form - 2 flutes form helps clear chips and debris away from the bit, decreasing Friction And Heat For A Faster, Cooler Drilling Process, Chatter-Free Design With Staggered Cutting Teeth Ensure The Precise Countersinking And Hole Smooth Clean.

Cobalt steel - manufactured from m35 5% cobalt steel, for much faster cutting and extra Longer Life Span, Measuring Rockwell Hardness Up To 65, with molybdenum and cobalt added to creates a hardened Alloy, With Up To 10 Times When Compared with an Average HSS Drill Bit. Hss titanium coating - classic hss construction with Titanium Coating For Capability And Durability.
BrandLingGan #ad
ManufacturerLingGan #ad
Height0.49 Inches
Length5.94 Inches
Width0.49 Inches
Part Number2020-11-21-15-115

9. Utoolmart

#ad

Utoolmart 2pcs 12.5mm Twist Drill with Titanium Coated High Speed Steel Bit HSS CO for Steel,Copper,Aluminum Alloy

#ad
Utoolmart #ad - Feaeture- flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process. Material- m35 hss with co, titanium Coated with titanium coating for capability and durability. Parameter- shank / cutting edge diameter : 12. 5mm/049" ;total length : 151mm/5. 89". Package content- 2 x twist Drill Bit. Application- perfect for stainless steel, copper, as well suit for wood, plastic. Suitable for home diy, aluminum alloy, and General Building/Engineering Use.
BrandUtoolmart #ad
ManufacturerUtoolmart #ad
Part NumberUT190821M-0069

10. Consolidated Toledo Drill

#ad

CTD Metric Magnum Super Premium 12.5mm Drill Bit 2 Pack

#ad
Consolidated Toledo Drill #ad - Body and clearance are gold surface treated for maximum lubricity. Special hi-molybdenum tool steel. Made in usa - metric jobber length drill Bit - 6" Length, 4 1/2" Flute Length. Precision ground: point, clearance, body, flutes, and drill diameter for the ultimate in accuracy and performance. Heat treated at 2185 f and then nitro-carburize finished at 950 F to be measurably harder than high speed steel. 135 degree split point for fast penetration and accurate starting without center punch.
BrandConsolidated Toledo Drill #ad
ManufacturerConsolidated Toledo Drill #ad
Part Number49970
Model49970