Top 10 2-1/8 Carbide Hole Saw – Hole Saws

As an Amazon Associate I earn from qualifying purchases.



EZARC Tungsten Carbide Teeth Hole Saw Hole Cutter Heavy Duty for Stainless Steel 2-1/8'' 54mm

EZARC #ad - Replaceable high quality pilot drill bit are available. Provide fast and precise cuts into stainless steel, sheet metal, FRP and wood. Smooth cuts with perfect cutting result. Extreme durability and no teeth breakage for any tough job. All in one design: drill bit, spring, wrench are included, no need to buy any extra accessories for the drilling works.
BrandEZARC #ad
ManufacturerEZARC #ad
Height5.51 Inches
Length3.35 Inches
Width4.33 Inches
Part Number804036



Hole Saw TCT JESTUOUS 2-1/8 Inch Cutting Diameter 3/16 Cutter Depth 3/8 Shank Dia Carbide Tipped Tooth Round Drill Bit Kit Cutter for Stainless Steel Metal Wood

JESTUOUS #ad - Driling with stainless steel plate, castings, high alloy steel, plastic, FRP, aluminum, iron, etc. High quality tungsten carbide materail teeth, provide a longer service life. Package content: 1 x hole Saw 1 x Hex Key 1 x Plastic Case. Hole saw is suitable for electric drills and platform drills. Designed with precision ground, sharp tough gears and stepped pilot drill bit to drilling more precise, smooth, faster and safer, leave perfect cutting results.
ManufacturerTungsten technology inc #ad



Metal Pipes and Hard Material, Deep Cut Hole Saw for Stainless Steel, CHS-25M 2-1/8" 54mm, EZARC Carbide Hole Cutter for Thick Metal

EZARC #ad - If you have any questions, please feel free to contact us to get immediately reply. Replaceable pilot drill bit are available. This hole cutter can precisely cut smooth holes due to the excellent control of the concentricity rate. Effortless operate our carbide hard metal cutting hole cutter has a chip groove and deploying hole design, which can effectively remove chips and increase operating speed.

Satisfactory service always committed to do our best to make sure our customers are satisfied about the purchasing of carbide hole saw from us. Various application cutting depth of 1-inch makes this stainless steel hole cutter easy to pass through a variety of home decoration and industrial applications, high alloy steel, iron pipes, stainless steel, including thick metal, and sheet metal plate.

Safe & durable design ezarc metal plate hole saw cutter uses variable teeth technology with 3 distinct cutting edge to balance the cutting and make the blades more durable and heat resistant. Fast & precise cuts the increased hardness of the carbide technology and optimized tooth geometry allow our hole saw to provide superior service life and fast cutting in the most demanding operations.
BrandEZARC #ad
ManufacturerEZARC #ad
Height5.51 Inches
Length3.07 Inches
Width2.28 Inches
Part Number804823

4. Freud



Freud #ad - Snap-lock mandrel system for a quick and easy change with no down time. 60 millimeter 2-3/8-inch cutting depth for deeper holes in one pass and increased productivity. 2-1/8-inch hole saw. Arbor sold separately. One-size fits all snap-lock mandrel fits all Diablo hole saws from 5/8-inch to 6-inches in diameter.
BrandFreud #ad
ManufacturerFreud #ad
Height1 Inches
Length1 Inches
Weight0.35 Pounds
Width1 Inches
Part NumberDHS2125

5. Lit Freud


Lit Freud DHS2125CT Carbide GP Holesaw, 2-1/8"

Lit Freud #ad - 2-1/8 54mmcarbide gp holesaw. 2-1/8 54mmcarbide gp holesaw. 2-1/8 54mmcarbide gp holesaw. 2-1/8 54mmcarbide gp holesaw. 2-1/8 54mmcarbide gp holesaw.
BrandLit Freud #ad
ManufacturerFreud-Diablo #ad
Height1 Inches
Length1 Inches
Weight0.7 Pounds
Width1 Inches
Part NumberDHS2125CT



Milwaukee 49-56-9295 BIG HAWG Carbide Hole Saw 2-1/8, 2-9/16, 4-5/8 Inches Kit 9-Piece with PACKOUT Case, 3-5/8, 3

MILWAUKEE'S #ad - Big hawg with carbide teeth, 1 2-9/16 in. Optimized slot design for fast plug removal Enlarged braze surface for stronger bond to the carbide teeth.

Big hawg with carbide teeth, 1 4-5/8 in. Includes: 1 2-1/8 in. Big hawg with carbide teeth, 1 big hawg with carbide teeth Arbor, 2 BIG HAWG with carbide teeth pilot bits. Big hawg with carbide teeth, 1 big hawg with carbide teeth diamond file, 1 3-5/8 in. 10x larger carbide teeth 3 tooth design for fast aggressive cuts. Carbide tipped multi-material pilot bit for increased material versatility Thicker backer for extreme life in demanding applications. Cuts wood, nails, cement board, shingles, plaster and more Compact PACKOUT organizer included.
ManufacturerMilwaukee #ad
Part Number49-56-9295

7. Zenith Industries


Zenith Industries ZN103118 Carbide Tooth Hole Saw, 2-1/8"

Zenith Industries #ad - 2-1/8" with 3/8" shank. Cut faster and outlast bi-metal hole saws. Last 50 times longer, depending on the application.
BrandZenith Industries #ad
ManufacturerZenith Industries #ad
Height4.25 Inches
Length2.13 Inches
Weight0.3 Pounds
Width2.13 Inches
Part NumberZN103118

8. MKC


MKC 2-1/8 inch Carbide Grit Hole Saw 54mm with max cutting depth 1-1/2 Inch 38mm Depth Cuts brick, concrete block, stucco, fiber cement siding & backer board, old plaster

MKC #ad - Hole saw depth1-1/2Inch Depth. Universal applicationthis carbide grit hole saw is your ideal choice for brick, backer board, fiber cement siding, concrete block, stucco & old plaster.

Package this carbide grit hole saw kit includes 4 3/8 inch111mm black saw blade, 1 drill bit, 1 sds plug mandrel, and 1 CARBIDE TIPPED PILOT DRILL BIT to satisfy your different needs.1100% satisfaction guaranteewe are dedicated to providing every customer with satisfying products and services. If you are not satisfied with our product, we will provide a free return or refund for you. Easier to cutcarbide grit hole saw cuts through a wide range of abrasive materials.
BrandMKC #ad
ManufacturerMKC #ad
Part NumberHS-127A

9. Starrett


Carbide Tipped Hole Saw 2-1/8 in 54MM PK/1

Starrett #ad - Will cut nail embedded wood or virtually and wood and metal combination and suitable for use in mains and battery operated tools. Tungsten carbide tipped teeth for outstanding cutting performance and product durability. A cost effective solution for cutting nail imbedded wood, or wood and metal combination, reinforced concrete and fiberglass. 1-5/8-inches cutting depth. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster.
BrandStarrett #ad
ManufacturerStarrett #ad
Part NumberCT218



MaxTool 2-1/8" 54mm Carbide Tipped Hole SawCarbide Tip Holesaw Deep Cut Carbide Holesaw; CT00Y57R208

MAXTOOL #ad - Fit arbors with 5/8-18 unf thread; 2-1/4“ Cut-Depth allows for easily cutting through thick or layered building materials in one pass.

Optimized teeth penetrate material easily and have equal smoothly cutting load with min vibration. Multiple knock-out slots and wide Gullet Big Chip Clearance for easy core removal rapid core eject; Thick hardened back plate prevent warping. Quality carbide teeth have high hardness, outstanding wear resistance, a tendency to stay sharper to cut fast abrasive tough material. The best cutting result for drilling in asphalt, dry wall, brick, concrete, tile, wood, composite, etc; Carbide Tip Pilot Drill bit is required.
BrandMAXTOOL #ad
ManufacturerJIANGSU TIANSHUN #ad
Height3 Inches
Length3 Inches
Weight180 Grams
Width3 Inches