Top 10 Adjustable Hole Saw for Drywall – Hole Saws

As an Amazon Associate I earn from qualifying purchases.

1. Jonard Tools


Cuts Plywood Plasterboard Sheetrock Acrylic Up to 1 1/16” Thick, Professional Grade Round Hole Saw Cutter, Adjustable Hole Size 2.2” to 10”, Jonard Tools AHC-10, Includes Dust Shield and Case

Jonard Tools #ad - High durability: rubber gasket provides surface protection against damage, tight seal against flat surfaces, and prevents fallout from debris. Adjustable size: cuts hole sizes from 2.

Versatile use: cuts round holes in plywood, plasterboard, sheetrock, and acrylic sheet up to 1 1/16” 2.7 cm thick and can be used with any variable speed drill. 2” to 10” 55 mm to 254 mm and cutting depth is up to 1 1/16” 27 mm with adjustable hex locknut and compression spring. What’s in it: adjustable hole saw cutter, polycarbonate dust shield, rugged case. Safe operation: tool has a compression spring that absorbs vibrations while cutting and polycarbonate transparent dust shield collects dust and prevents chips from flying into eyes while cutting.
BrandJonard Tools #ad
ManufacturerJonard Tools #ad
Weight5.61 Pounds
Part NumberAHC-10

2. Klein Tools


Klein Tools 53731 Hole Saw, Adjustable Saw Cutter with Dust Shiled for Cutting Drywall and Ceiling Tile for Recessed Lights

Klein Tools #ad - Quickly and smoothly cuts cleaner holes in drywall and ceiling tiles. Two included dust shields keep workspace clean and prevent shavings and debris particle from being airborne. Fits most 3/8-inch and 1/2-Inch drill chucks. Blades adjust to cut holes from 2 to 7-Inch diameter. No binding while cutting. No additional tools needed to adjust the hole saw. Hex key included.
BrandKlein Tools #ad
ManufacturerKlein - Geneva Supply #ad
Height3 Inches
Length7 Inches
Weight0.31 Pounds
Width7 Inches
Part Number53731

3. Amartisan


Vent Holes, 1-5/8" to 8" 40, 200mm Adjustable Hole Saw Cutter, Amartisan Hole Cutter, Ceiling Speakers, with ABS Dust Shield for recessed Lights

Amartisan #ad - Sturdy carry case:easy to carry, professionals and DIY home owners need to punch holes for recessed lights, it is a tool that carpenters, ceiling speakers and vents.

Scope of application:cuts plywood, sheetrock, cement board, veneer, ceiling tiles, slate, etc. Size adjustable:double blade hole cutter applied 1-5/8" to 8" 40 - 200mm holes with depth up to 3/4"19mm from one side, 1-1/8"30mm from two sides. Hole cutter kit:it is a very practical tool set with dozens of hole saws that make it faster, safer and easier to cut the required hole size. Dustproof design: abs dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home.
BrandAmartisan #ad
ManufacturerAMARTISAN #ad
Height4.9 Inches
Length12 Inches
Width10 Inches
Part NumberHole Saw

4. Luomorgo


Luomorgo 1 3/16" to 12" Adjustable Hole Saw Circle Cutter Drill Bit Tool Saw Round Cutting for Drywall Wood

Luomorgo #ad - 100% risk-free shopping: if you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. The valve body has a clear scale for fast measurement and precise cutting.

Cutting hole diameter: 1-3/16" - 12"30 - 300mm, cutting depth: 1/8 "-2"3 - 50mm, Shank Diameter: 3/8" 10mm. Sturdy & durable: use high quality carbon steel for long life. Package includes: 1 x adjustable hole saw cutter, 1 x drill bit, 1 x hex wrench. Widely used: can be used to cut a variety of materials, laminate, such as plywood, rubber, plastic, composite materials, etc. Because we want our customers to enjoy a 100% satisfied shopping experience.
BrandLuomorgo #ad
ManufacturerLuomorgo #ad
Weight0.22 Pounds
Part NumberHAOK20190100000261

5. Lunarlipes


Speaker Holes or Ventilation Holes, Adjustable Hole Saw Cutter Kit 1-5/8" to 8" 40-200mm Twin Blade Hole Saw with ABS Dust Shield for Making recessed Lights

Lunarlipes #ad - It is recommended to use hss blade when cutting wood, plywood, rubber, fiberglass, Aluminum Composite Panels, particle board, plastic, plaster, acoustic tile, hardi board, laminate; use tungsten carbide blade when cutting drywall, MDF. During your hole drilling to the ceiling, it can collect most of the edge debris to make you more safe and convenient during the work.

20 in 1 the adjustable circle hole saw cutter set includes a custom tool box with handle, an abs dust cover, five Brad-point wood drill bits and five Masenry drill bits, one set of HSS blades and two set of tungsten carbide blades, one auger type self-feeding pilot bit and one HSS pilot bit, one Long Arm Hex Key Wrench, one Carpenter Pencil and one tape measure length is 3m. If you have any questions about the product, please feel free to contact us. You can adjust yourself according to your needs to cut any diameter between 40mm to 200mm 1-5/8" to 8" and height 1-1/8" round holes.

100% money-back guaranteefor any reason you are not satisfied, you can request a free replacement or a full refund. Applicable to many materials it can be easily installed on both table drills and hand drills. Infinitely adjustable the circle hole cutter set is designed with double cutter head rotary cutting. Subversive design our adjustable hole saw - cutter set gives the hole saw an ABS guard with a rubber gasket for a better fit. We will reply within 12 hours.
BrandLunarlipes #ad
ManufacturerU/D #ad
Part NumberHole Saws kit

6. YaeKoo


7-7/8" Adjustable Wood Hole Saw 30mm-200mm Circle Hole Cutter Wood Drywall Twist Hole Drill Bit Saw Round Cutting, 1-3/16"

YaeKoo #ad - Shank diameter: 10mm 3/8", which fit most drills in market. This adjustable circle hole saw cutter is Made of alloy steel, black oxide finish surface. Cutting hole diameter range: 30mm-200mm 1-3/16" - 7-7/8". You will get a hole saw cutter, a drill bit and a hex wrench. Cutting depth range: 3mm-50mm 1/8" - 2".
BrandYaeKoo #ad
ManufacturerLong Time Trading #ad
Part NumberSU-0124



Cutter with ABS Dust Shield for Recessed Lights Speakers Cornhole Boards Cuts Plywood Sheetrock Plaster Fiberglass Plastic, 1-5/8" to 8" 40-200mm , QWORK Twin Blade Adjustable Hole Saw

QWORK #ad - Convenient & save money - one hole cutter kit replaces of dozens of hole saws for faster, easier cutting of exactly the hole size needed. Safe & clean - ball bearing mounted abs dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home.

Professional cutting - hole saw cuts smooth and even 8" diameter holes through wood, plaster and plastic; Cutting depth up to 3/4"19mm from one side, drywall, 1-1/8"30mm from two sides. It is a very practical tool set for carpenters, professionals and DIY home owners for recessed lights, safer, contractors, ceiling speakers, home decorators, vent holes and other hole cutting application. Complete set - this kit includes one professional grade adjustable hole cutter with two replaceable pilot drill bits 1x auger type self-feed pilot bit + 1x HSS pilot bit, 1/4", 3/16", one ABS dust shield, one adjustment hex wrench, one 2m tape measure, 3/8", 5/16, two sets of replaceable cutting blades 1 set of high speed steel blades + 1 set of tungsten carbide blades, 5 Pcs brad-point wood drill bits and 5 Pcs Masonry drill bits 5/32", a durable storage case and user's manual.

Easy to use - includes everything you need to do-it-yourself, mandrel and drill bit work with any 3/8" drills & up. It is also safe to use as protection equipment for hole cutting application.
BrandQWORK #ad
ManufacturerQWORK #ad
Height4.92 Inches
Length12.6 Inches
Weight5.49 Pounds
Width12.6 Inches
Part NumberWD1817

8. Hole Pro


Hole Pro X-305 1-7/8" to 12" Twin Blade Adjustable Pro Hole Saw Cutter Cuts Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie: Includes Tungsten Carbide & HSS Blades

Hole Pro #ad - 14" od - adjusts infinitely for holes 2" to 12", Shield turns drill into portable drill press to use anywhere. Sturdy carry case and replaceable blades: Cut plywood MAX 8", fiberglass, plaster, sheetrock, veneers, ceiling tiles, T&G. Ships within one business day from our NV warehouse. Twin blades for faster/smoother cutting, strong shield traps dust; tensioning knob controls cutting depth. Complete kit - add your 1/2" drill chuck – Needs ¼ power of hole saws so bigger holes easily cut.
BrandHole Pro #ad
ManufacturerHole Pro #ad
Height16 Inches
Length16 Inches
Weight2 Pounds
Width5 Inches
Part NumberHP1104
ModelHole Pro X-305

9. General Tools


General Tools 55 Heavy Duty Circle Cutter. Adjustable 1-3/4 Inch to 7-7/8 Inch

General Tools #ad - The tempered steel body features marked graduations on the beam for fast measurement and application. All adjusments are made with a hex wrench which is included; Replacement blade is General Tools Model # 55 Blade, replacement drill is General Tools Model # 5/6/55 Drill.

Designed for professional use, the Heavy Duty Circle Cutter will make clean cuts from 1-3/4 to 7-7/8 inch diameter. 55 heavy duty circle cutter is designed with a 1/2 shank for drill press use only; Maximum safe speed is 500 RPM. This round shank circle cutter is great for making smooth cuts through most materials, including wood, composite, sheet metal and more; Shank is 1/2 inch round.
BrandGeneral Tools #ad
ManufacturerGeneral Tools #ad
Height1 Inches
Length5.5 Inches
Weight0.74 Pounds
Width4 Inches
Part Number55

10. ZiTour


Zitour Adjustable Punching Saw E901,Adjustable Hole Saw1.77in to 5.12in Dia Hole Cutter Drill Bit for Drilling Holes in Wood,Plastic,Drywall,Plumbing,Replaces Traditional Hole Saw Set

ZiTour #ad - Various adjustable diameters:this woodworking hole driller with adjustable multi diameters from 1. 77in to 5. 12in, makes it possible to cut holes of different diameters with just one tool, saving money and space.

Easy to use:no complex instructions for use. The infinitely adjustable in just three steps:Loosen;Adjust Simultaneously;Fasten. Compatible tools:the hole saw is 10mm acceptable for all standard power drills and cordless screwdrivers. Attention: the cordless screwdriver is only suitable for drilling on gypsum plasterboard, OSB panel, while the power drill can be used on gypsum plasterboard, softwood, plywood and more.

Multiple use:widely used in woodworking opening, etc, spotlight opening, plastic plate opening, DIY speaker opening, but not for glass and metal. Triple blade design, straight round effect, and ensure fine and clean cuts with their special, and burr-free. Fine & clean cuts:the three triple tooth blades saw through plasterboard and softwood boards with ease, smooth cut, straight-set toothing.
BrandZiTour #ad
ManufacturerZitour #ad
Part Number03