Top 10 DCS570B Rip Fence – Home Improvement

As an Amazon Associate I earn from qualifying purchases.

1. Generic


OEM N074939 Replacement for DeWalt Circular Saw Rip Fence DCS570B DCS570B DCS570P1 DCS570P1 DCS575T2-AR DCS575T2-B2 DCS575T2-B3 DCS575T2-BR DWE575-B2 DWE575K-B2C

Generic #ad - Genuine, oeM Replacement Part. Power source type: Ac/dc. Included components: Bare-Tool. Measures approximately 12. 30 x 5. 65 x 1. 00 inches. Compatible with: dcs570b, dcs575t2-b2, dcs570p1, dcs570b, dcs570p1, dcs575t2-b3, dwe575-b2, dcs575t2-br, dcs575t2-ar, DWE575K-B2C. Replacement rip fence, part number N074939.
BrandGeneric #ad
ManufacturerGeneric #ad
Height1 Inches
Length12.3 Inches
Weight0.44 Pounds
Width5.65 Inches
Part NumberN074939

2. zerokooup


N074939 & N287119 for DeWalt Replacement Rip Fence #COMBO00233 DCS570B,DCS570P1

zerokooup #ad - Excellent replacement: Installing a Rip Fence replacement helps improve high power tool performance. Zerokooup built to perform at a Great Value: Our are made, tighly engineered to ensure the highest quality level. Orders in the lower 48. Parts individually to customers who need to replace a single tools part. Purchase your rip fence part today! Fast, free shipping! ~ on all U. S. Will this replacement part work with your?compatible with dcs570b, dcs575t2-br, dcs575T2-AR, dwe575-b2, dcs575T2-B3, dcs575t2-b2, dcs570p1, DWE575K-B2C.
Brandzerokooup #ad
Manufacturerzerokooup #ad
Part NumberN074939 N287119



DEWALT Circular Saw Fence DW3278

DEWALT #ad - Ruggedly crafted from all metal for long life. Rip fence for use with dewalt circular saws including models DWE575, DWS535, DWE364, DWE575SB, DW384. Note: this item is not compatible with ALL DEWALT circular saws. Easy attaching by inserting through slots at front of shoe and tightening screw. Simple to fasten and designate distance from blade to fence. Provides smooth, precise results.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height1.5 Inches
Length14.75 Inches
Weight0.6 Pounds
Width7.42 Inches
Part NumberDW3278
Warranty1 Year Full Warranty



DEWALT Sliding Compound Miter Saw, 12-Inch DWS779

DEWALT #ad - Efficient dust collection system captures over 75% of dust generated. 2-inch x 14-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 10-inch dimensional lumber at 45 degree.

Tall sliding fences support 6-3/4-inch base vertically. Dual horizontal steel rails with innovative clamping mechanism and linear ball bearings for accuracy and durability. Precise miter system and machined base fence support Cam-lock miter handle with detent override delivers quick and accurate miter angles for DEWALT miter saw. Oversized, high visibility bevel scale with positive stops. Stainless steel miter detent plate of the 12-inch miter saw blade comes with 10 positive stops. Bevels 0 degree - 48degree left and right. The mitre saw has a precise miter system and machined base fence support.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height17 Inches
Length21 Inches
Weight56 Pounds
Width17 Inches
Part NumberDWS779
Warranty3 year limited warranty

5. Kreg


Kreg KMA2685 Rip-Cut Circular Saw Guide , Blue

Kreg #ad - Take your saw to the material instead of having to take your material to the saw. Use the oversize edge guide for precise control throughout the cut. Eliminate need for marking, measuring, and layout lines. Make rip cuts and crosscuts up to 24" Wide. Cut multiple pieces to the same size With just one setup.
BrandKreg #ad
ManufacturerKreg #ad
Height2.5 Inches
Length30.88 Inches
Weight2.45 Pounds
Width8.75 Inches
Part NumberKMA2685
Warranty90 day warranty

6. Delmar Tools


Helps Prevent Kickback, Makes Narrow Rip Cuts Safe And Easy, Delmar Tools Patented Push Block For Table Saws

Delmar Tools #ad - Innovative balance wheel is deployed via a button to deliver stability on narrow cuts. No annoying thumbscrews that have to be loosened and tightened for each cut. Patented pushblock makes narrow rip cuts on the table saw safer and easier to control- make your table saw rip cuts down to a 1/4" wide smooth, easy, and safe! the delmar tools patent pending push block creates an adjustable width tunnel for the table saw blade to pass through under the push block on difficult narrow rip cuts as small as 1/4”.

Comes fully assembled, no installation necessary- arrives ready to go right out of the box, no frustrating assembly required. Eliminates those dangerous close calls with your fingers by the saw blade on narrow rip cuts! User friendly adjustments to set up each rip cut- adjustable center leg is easily adjusted by rolling a wheel with your thumb to set up different width cuts. This push block grips both side of the stock and guides it through the table saw cut while safely keeping your fingers and hands out of the way.

Any issues down the line and you will be covered for a free replacement or a refund. The best tool for effectively ripping thin stock on the table saw- unlike cumbersome push sticks and feaher boards, this push block design distributes even and accurate pressure to both sides of the stock for fluid rip cuts. Other push blocks require frustrating installation with tons of moving pieces. Lifetime warranty- delmar tools includes a lifetime warranty on this pushblock. Gain complete control of both side of stock on your rip cuts.
BrandDelmar Tools #ad
ManufacturerDelmar Tools #ad
Weight1.54 Pounds
Part NumberDT-1-MASTER



DEWALT DWS5100 12-Inch Dual-Port Folding Rip Guide

DEWALT #ad - Up to 14 1/2-inch ripping Capacity on Right Side for maximum width rip cuts. Permanently laser-etched markings for accurate and fast setting;. Folds down to 19-inch long by 3-inch wide for easy storage. Lightweight and durable aluminum construction for portability and strength. Compatible with dewalt model DCS577 and DWS535 saws only. 12-inch ripping capacity on Left Side for common rips such as stair treads and risers.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height1 Inches
Length19 Inches
Weight1.25 Pounds
Width3 Inches
Part NumberDWS5100
WarrantyThree-year limited warranty, One-year free service contract, 90-day money back guarantee



Cordless DCS570B, DEWALT 20V MAX 7-1/4-Inch Circular Saw with Brake, Tool Only

DEWALT #ad - Runtime - the cordless circular saw provides 330 crosscuts in 2x4 pine. Capacity - 7-1/4-inch blade of the compact circular saw provides 2-9/16-inch cutting capacity at 90 degrees. Ease of use - bevel capacity up to 57 degrees for increased versatility. Power - brushless motor of dewalt 7 1/4 circular saw provides 5500RPM maintaining speed under load.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height10 Inches
Length11 Inches
Weight7.5 Pounds
Width8 Inches
Part NumberDCS570B
Warranty3 year limited warranty



WORX WX051 Pegasus Folding Work Table & Sawhorse

WORX #ad - Connect multiple tables create a whole work counter when you link 3 or more Pegasus’ together. Custom clamps two quick clamps are integrated and stay attached even when you fold the table into a sawhorse.

Built to last made out of a dependable, molded ABS with steel supports and fittings. Because they’re designed specifically for the Pegasus, they’ll be stronger and last longer. As a sawhorse. Perfect extra shelf or storage for your workspace. Worx tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last.

Worktable & sawhorse holds up to 300 lbs. As a work table, supports 1, 000 lbs. And it’s easy to transition between the two. Do it better. Do it yourself. Do it with worx. Whether your worksite or workshop is spacious or tight, this building solution expands or contracts to fit your needs. Light and sturdy it’s only 25 lbs. And its foldable design makes it easy to move and store.
BrandWORX #ad
ManufacturerWORX #ad
Height6.3 Inches
Length27.17 Inches
Weight28 Pounds
Width37.04 Inches
Part NumberWX051
WarrantyComes with 3-year Manufacturer’s Warranty

10. Skil


5280-01, SKIL 15 Amp 7-1/4 Inch Circular Saw with Single Beam Laser Guide

Skil #ad - Safety lock/guarded trigger and power-on indicator minimize accidental starts. Dust blower keeps line-of-cut free of sawdust for improved visibility. 7-1 4-inch carbide-tipped blade included. Powerful 15-amp motor delivers 5 300-RPM for greater speed and faster cuts. Spindle lock for easy blade changes. 51° bevel capacity with a positive stop at 45° for a wide variety of cuts.
BrandSkil #ad
ManufacturerSKIL #ad
Height8.5 Inches
Length14.2 Inches
Weight8.7 Pounds
Width9.8 Inches
Part Number5280-01