Top 10 DFM Tool Works – Wood Chisels

As an Amazon Associate I earn from qualifying purchases.

1. DFM Tool Works

#ad

0.032" x 2.5" x 5", DFM Tool Works Blue Cabinet Scraper Rectangle Sets- MADE IN USA, Multiple Sizes 2

#ad
DFM Tool Works #ad - Made in the usa from 0032" 081mm thick american Blue Spring Steel. 5" long edges are filed smooth for faster sharpening and burnishing of your tool. Burnisher is nOT included and recommended for best scraping performance. Card scraper edge will last longer in hard wood with a High Carbon Steel, 50 C Rockwell.
BrandDFM Tool Works #ad
ManufacturerDFM Tool Works #ad
Height0.1 Inches
Length7 Inches
Width4 Inches

2. DFM Tool Works

#ad

DFM Blue Curved Cabinet Scraper Card Set

#ad
DFM Tool Works #ad - Card scraper edge will last longer in hard wood with a High Carbon Steel, 50 C Rockwell. Made in the usa from 0032" 081mm thick american Blue Spring Steel. Scrapers need sharpening before use. Burnisher is nOT included and recommended for best scraping performance.
BrandDFM Tool Works #ad
ManufacturerDFM Tool Works #ad
Height0.1 Inches
Length5 Inches
Width2.5 Inches

3. DFM Tool Works

#ad

DFM Small Square and Marking Center Finder Precision MADE IN USA Blue

#ad
DFM Tool Works #ad - Outer dimensions 2. 625" x 1. 625" x 0625". Center marking hole Bottom is 1/16" diameter for consistent center mark. All components including pins Made in USA. Center marking hole 11/32" 034" to allow larger pencils. Can be used as a Saddle Square to Transfer Lines.
BrandDFM Tool Works #ad
ManufacturerDFM Tool Works #ad
Height0.63 Inches
Length2.63 Inches
Width1.63 Inches

4. DFM Tool Works

#ad

DFM Small Carpenter Square MADE IN USA with Fixed Miter Angle Pin Blue

#ad
DFM Tool Works #ad - Qty 5 - 1/4" pin holes for Marking Polygon Miters w/ included pin. 1/16" scribe holes in 1/16" increments up to 3". Perfect 3. 5" x 3. 75" size for your pocket or apron. Large enough to cross mark 2 x 4 lumber.
BrandDFM Tool Works #ad
ManufacturerDFM TOOL WORKS #ad
Height3.7 Inches
Length3.5 Inches
Width0.75 Inches

5. Swanson Tool Co., Inc

#ad

Swanson Tool Co S0101 7 Inch Speed Square Tile

#ad
Swanson Tool Co., Inc #ad - Features: 1/4-in spaced scribing notches and the Diamond cutout for easy rafter seat cuts and scribing the most common and popular stud widths.

The speed square, construction professional, roofer, made in the USA since 1925, is essential for every carpenter, and DIYer. Speed square belongs on every tradesman's tool bench; includes Try Square, Miter Square, line scriber, saw guide, and protractor. Includes pocket-sized swanson Blue Book, a comprehensive guide to help workers make correct angle cuts for any pitched roof. Gradations included for marking common, hip, valley, and jack rafters; Useful for determining and marking angles and making square cuts on boards.
BrandSwanson Tool Co., Inc #ad
ManufacturerSwanson Tool #ad
Height8 Inches
Length1 Inches
Weight0.5 Pounds
Width8 Inches
Part NumberS0101
ModelS0101
WarrantyAs Labeled

6. DFM Tool Works

#ad

DFM Tool Works Cabinet Scraper Burnisher Tool – MADE IN USA – with Hard Maple Handle and Super Hard High Speed Steel Rod

#ad
DFM Tool Works #ad - Made in the usa with super Hard High Speed Steel Rockwell 63-65. Super hard steel easily Burnishes or Turns a Hook on Cabinet and Card Scrapers. Beautiful hard maple Handle is Stained Cherry Red and Made to Last.
BrandDFM Tool Works #ad
ManufacturerDFM Tool Works #ad

7. General Tools

#ad

General Tools 822 Digital Angle Finder Rule, 5-Inch

#ad
General Tools #ad - Digital protractor has lock and reverse angle functions that make all types of work easy and fast. Hinge mechanism on the angle rule allows a full 360-degrees to measure inside outside and reverse angles. Digital stainless steel ruler and angle finder combo makes precise measurements for easy woodworking. Woodworking tool can be zeroed at any point in the swing; digital measuring stick has a length of 5 inches. Protractor comes with a large easy-to-read LCD display; never guess or eye ball the angle and length again with one convenient tool.
BrandGeneral Tools #ad
ManufacturerGeneral Tools #ad
Height10.88 Inches
Length1.13 Inches
Weight0.2 Pounds
Width5.38 Inches
Part Number822
Model822
Warranty1 year parts

8. IRWIN

#ad

IRWIN Tools Combination Square, 6-Inch 1794468, Metal-Body

#ad
IRWIN #ad - 6" length. This combination square has a cast-zinc body for durability. A stainless-steel blade is built for rugged use. The black, precision-etched scales on this combination square give accurate 90° and 45° readings.
BrandIRWIN #ad
ManufacturerIRWIN #ad
Height0.59 Inches
Length3.83 Inches
Weight0.45 Pounds
Width6.75 Inches
Part Number1794468
Model1794468

9. DFM Tool Works

#ad

DFM 6 Inch Trade Edition Carpenter Square MADE IN USA Black

#ad
DFM Tool Works #ad - 1/8" scribe marks easily fit Carpenter Pencils. Cnc machined for Precision and Accuracy. Comes with 6 inch DFM Logo Sticker. Comes with foam organizer to Store 6 inch Square and can store other DFM squares purchased separately. Black hard anodized for Durability & Contrast.
BrandDFM Tool Works #ad
ManufacturerDFM Tool Works #ad
Part Number691039182500

10. Snap-on

#ad

SnapOn 474-125-0.60 Bahco 5-Inch Cabinet Scraper

#ad
Snap-on #ad - Cabinet scraper. Specifically for carpentry work. Overall length of 5-Inch. Blade of cold rolled, hardened and tempered chrome nickel steel. White plastic edge protector.
BrandSnap-on #ad
ManufacturerSnapOn #ad
Height0.01 Inches
Length4.92 Inches
Weight0.02 Pounds
Width0.02 Inches
Part Number474-125-0.60
Model474-125-0.60