Top 10 Dual Flush Toilet Kit – Kitchen & Bath Fixtures

As an Amazon Associate I earn from qualifying purchases.

1. Next by Danco


Next by Danco HYR460 HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Lever Handle I Valve Replacement, White

Next by Danco #ad - Detects leaks: Detects leaks and signals when a leak is found. Flush valves and requires 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. Complete kit: combines two products that together will increase your toilet's efficiency: HYR270 Dual Flush Valve and HC660 HydroClean fill valve.

Cleans toilet tank: Jets clean toilet tank and parts with every flush. Eliminates toilet leaks: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain. The second full Flush button uses the normal amount of water for solids. Hassle-free installation: Drop-in installation without tools in 5 to 10 minutes - tank removal not required. Water-saving dual flush toilet repair kit: Easily converts a standard toilet into a 2-button, dual flush toilet that saves water by reducing the amount of water used with each flush.

Compatibility: works with standard 2 in. Dual-flush handle: one button is the quick flush setting that uses significantly lower water volumes for liquids and paper - the setting needed 4 out of 5 times. No warp seal: permafit silicone seal is Chlorine and chemical resistant and will not warp. Not compatible with Mansfield toilets. Calibration: the total repair Kit can be calibrated to adjust the exact amount of water needed, saves water.
BrandNext by Danco #ad
ManufacturerNext by Danco #ad
Height12.6 Inches
Length7.2 Inches
Weight1.55 Pounds
Width3.5 Inches
Part NumberHYR460
Warranty5 year

2. Flush*Saver


FlushSaver 3" DRAIN STANDARD LEVER HANDLE Dual-Flush Deluxe DIY Conversion Kit, FITS STANDARD 3" DRAIN TWO PIECE TOILETS. Converts standard toilets into efficient dual-flush systems.

Flush*Saver #ad - Saves up to 10, 000 gallons per year for an Average Family of Four - Pays For Inself in Months. Traditional flush handle is Easy to Understand and Operate - Eliminates Repeated Flushing. Commercial grade plastics and stainless Steel will Not Rust or Corrode – Rated for 75, 000+ Flushes. Fits standard 3" two piece toilets - 3 1/8" - 3 1/2" drain with 5/8" - 3/4" Square Lever Handle Hole. Personal hygiene product - NOT RETURNABLE.
BrandFlush*Saver #ad
ManufacturerWater Saver Products, LLC #ad
Part NumberLVFSC-T3D1

3. Fluidmaster


Fluidmaster 400ARHRKP10 PerforMAX Universal High Performance All-In-One Toilet Repair Kit, for 2-Inch Flush Valve Toilets

Fluidmaster #ad - High performance flapper: performax 507AK high performance 2-inch adjustable water-saving toilet flapper eliminates twisting and ghost flushing to maximize water usage with each flush.

7-year warranty: This product has a 7-year warranty. Easy installation: easily installs in 10 minutes or less to get your toilet flushing like new again. Universal design: performax toilet fill valve with 2x greater refill rate adjusts easily from 10 – 15 inches and is ideal for use in high efficiency 1. 28 to 1. 6 gallons per flush toilets. Premium toilet performance: all in one toilet repair kit replaces inefficient fill and flush valves, leaky flappers, and broken toilet handles to make your toilet run like new.
BrandFluidmaster #ad
ManufacturerFluidmaster #ad
Height13.77 Inches
Length4.52 Inches
Weight1.5 Pounds
Width7.67 Inches
Part Number400ARHRKP10

4. American Standard


Plastic, Dual Flush Valve, Toilet Repair Part

American Standard #ad - Easy to install. Country of Origin: Mexico. Reliable performance. For use with american Standard H2 option toilet without an in tank liner.
BrandAmerican Standard #ad
ManufacturerAmerican Standard #ad
Height3.94 Inches
Length15.19 Inches
Weight1 Pounds
Width5.5 Inches
Part Number7381091-400.0070A
WarrantyLimited Lifetime

5. Next by Danco


White, Next by Danco HYR271T Hydroright Dual Flush Valve And Lever Handle

Next by Danco #ad - Repairs common leaky toilet issues: Eliminates the most common problems in toilets that cause leaks as this flush valve replaces a worn-out toilet flapper, chain and handle which can often break. Water-saving toilet flush valve: the hydroRight replacement toilet flush valve easily converts most standard toilets into a dual-flush water-saving toilet which uses up to 70% less water for liquids and paper.

Compatibility: fits 1. 6 to 3. 5+ gpf gallons per flush standard 2-piece toilets with 2 in. Lever style handle: includes lever style split handle flush activator that gives you a choice to use the quick-flush setting which uses less water volume for liquids and paper or the full-flush setting which uses the normal full flush water volume to accommodate solids.

Flush valve and requires 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid; Note: Will NOT FIT Mansfield toilets and is not compatible. Built to last: constructed of durable plastic and the Perma fit silicone seal is chemical resistant and will not warp. Easy no-tools required installation: simple Drop-in installation without tools in less than 20 minutes with NO TANK REMOVAL required.
BrandNext by Danco #ad
ManufacturerDanco, Inc. #ad
Height10.5 Inches
Length4 Inches
Weight0.75 Pounds
Width3 Inches
Part NumberHYR271T
Warranty1 Year Warranty

6. Fluidmaster


Fluidmaster 550DFRK-3 DuoFlush Complete Fill and Dual Flush Conversion System

Fluidmaster #ad - Save water & money, uses up to 45% less water. Easy-to-install and fully adjustable for a wide range of settings, without removing the valve. Durable build with a 5-year warranty. Replace noisy and slow filling inefficient models. Convert your existing 2” flush valve toilet to Dual Flush technology. Retrofits to any 2” flush valve toilet, 1. 6 gpf and pre 1994 3. 5+ gallon per flush models. Full and half flush, Dual Action toilet flush lever included. Complete fill & dual flush conversion system. Performax high performance Fill Valve included for 2x greater refill rate.
BrandFluidmaster #ad
ManufacturerFluidmaster #ad
Height12.4 Inches
Length4.3 Inches
Weight2 Pounds
Width8.1 Inches
Part Number550DFRK-3

7. American Standard


American Standard 7381002-400.0070A Dual Flush Valve #A2412

American Standard #ad - Contains valve, gasket and washer. Call american standard customer Service at 1 800 442 1902 for compatibility questions. Valve is white in color. Made from plastic. 2" dual flush valve for specific Flowise 4035 toilets.
BrandAmerican Standard #ad
ManufacturerAmerican Standard #ad
Height3.55 Inches
Length13.05 Inches
Weight1 Pounds
Width6.1 Inches
Part Number7381002-400.0070A

8. Sevender


Dual Flush Toilet Kit Top Push Button Toilet Tank Button Replacement 114mm Diameter

Sevender #ad - Compatiable with most dual flush toilet with 38mm hole in the cistern lid. The toilet button spring is made of high quality 304 stainless steel wire, which is durable and elastic. It is easy to disassemble and install.
BrandSevender #ad
ManufacturerSevender #ad

9. Fluidmaster


Fluidmaster 400AH PerforMAX Universal High Performance Toilet Fill Valve

Fluidmaster #ad - Fix noisy, slow filling valves with the quietest, most powerful toilet fill valve on the market! Easy-to-install PerforMAX design. Replaces outdated, inefficient, or noisy fill valve designs. Adjustable roller-clamp controls water usage. Performax technology achieves 2X greater refill rate, while saving water usage. 7 year warranty. Performax technology achieves 2X greater refill rate, while saving water usage. Height adjusts easily between 10” – 15”. Universal fitting most toilet models. Replaces outdated, inefficient, or noisy fill valve designs. 7 year warranty.
BrandFluidmaster #ad
ManufacturerJensen #ad
Height4.5 Inches
Length3.13 Inches
Weight0.7 Pounds
Width12.5 Inches
Part Number400ARHR

10. Fluidmaster


For 2-Inch Flush Valve Toilets, Fluidmaster 400CRP14 Universal Toilet Fill Valve and Flapper Repair Kit

Fluidmaster #ad - High quality and durable toilet fill valve. Features the proven 400A anti-siphon toilet fill valve. Ideal product for use in 3. 5 gallons per flush toilets or larger. The 501 flapper has Microban that prevents breakdown due to bacteria. Note: this product is designed to fit toilets with 2″ flush valves. This product has a 5 year warranty and is the solution to fix a noisy and running toilet. The 501 flapper is chlorine-resistant and has a solid frame that prevents it from twisting. Includes the 400a fill Valve and the 501 Flapper.
BrandFluidmaster #ad
ManufacturerFluidmaster #ad
Height15.76 Inches
Length3.71 Inches
Weight0.6 Pounds
Width6 Inches
Part Number400CRP14