Top 10 JET Lathe Accessories – Power Drill Chucks

As an Amazon Associate I earn from qualifying purchases.

1. PSI Woodworking


PSI Woodworking Products TM32 1/2-Inch Drill Chuck with #2 Morse Taper Arbor 1/2" 2MT

PSI Woodworking #ad - Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more. Includes the 1/2" drill chuck, #2 Morse Taper Arbor, and Jaw Tightening Key. The #2mt arbor accepts 1/4" x 20tpi draw bolt; Draw bolt not included. Removes easily with knock out bar. This 3-jaw chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Part NumberTM32
Warranty2 years under normal use.

2. WEN


WEN LA4374 3.75-Inch 4-Jaw Self-Centering Lathe Chuck Set with 1-Inch x 8TPI Thread

WEN #ad - External jaws spread inside of workpieces with pilot holes ranging from 1-3/4 to 3-1/8 inches. Keyed tightening mechanism provides additional grip strength to the workpiece. Internal jaws tighten around workpieces varying from 1-1/4 to 2-1/2 inches in size. Features a 1” x 8 tpi thread for compatibility with the majority of wood lathes on the market. Scroll chuck perfect for holding bowls, spindles, and other unwieldy lathe projects.
BrandWEN #ad
ManufacturerWEN #ad
Part NumberLA4374



Steel Face Plate 1"-8 Threaded for Wood Lathe Turning 4"

ONESTEP-TOOLS #ad - Machined steel construction. 4" diameter. 1"-8 tpi mounting. Precision machined face with 1 ring. 8 screwholes - 4 rows of 2 at 90 degrees.
ManufacturerOnestep-Tools #ad



3" Wood Lathe Steel Faceplate Chucks, 1”-8TPI Thread Woodworking Accessories Tools

PHUKIMLONG #ad - Made of steel, heavy and Rigid, 1"-8TPI Thread Size. There is a flat-cut surface on the tail tube and it can be easily removed from the lathe. 8 mounting holes on the plate, easy installation of the workpiece. Diameter of mounting hole:15/64". 3" diameter.
ManufacturerPhukimlong Woodworking #ad
Part NumberFP-3-1INCH8TPI

5. Jet


JET Lathe Chuck Set 1"x8TPI, 5 Sets of Jaws

Jet #ad - Fits jet lathe models jwl-1015, jwl1221, jwl1440 and other models with a 1"x 8 TPI spindle thread. Chuck is nickel plated to deter rust. Stainless steel T-Handle adjusts jaws concentrically. Includes 5 sets of interchangeable jaws with self centering chuck for varying tasks. Packed securely in a hard plastic JET case with EVA foam.
BrandJet #ad
ManufacturerJPW Industries #ad
Part Number719900
Warranty90 Days

6. Jet


JET 719101 Bed Extension for JWL-1015 AND JWL-1015VS Lathes

Jet #ad - Durability: Cast iron construction. Versatility: 21" bed extension. Compatibility: fits jet jwl-1015 and JWL-1015VS lathes.
BrandJet #ad
ManufacturerJET #ad
Height8.5 Inches
Length21.6 Inches
Weight0 Pounds
Width7.5 Inches
Part NumberJWL-1015BE
Warranty90 day.

7. PSI Woodworking


PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

PSI Woodworking #ad - This is a c-series chuck; compatible with all additional c-series jaws and accessories: 7-3/4" jumbo flat jaws cjawfj2, Set of 2 Alligator Jaws LCALJAWS, 8-1/4" Super Finishing Jaws CJAWXL, 5" Small Flat Jaws CJAWFJ1, Pen Blank Drilling Jaws CJAWPEN, and more!.

1 step jaws: 3/32" to 1-3/8" & 11/16" to 2-3/8"; #2 round jaws: 7/8" to 1-1/2" &1-1/4" to 2"; #3 wide bowl jaws: 3-1/16" To 4-3/8"; pin jaws: 1" To 2-1/4". Barracuda2 chuck body is 3. Includes: 1 barracuda2 chuck body, 1 allen wrench, 1 gear key, 1 woodworm screw chuck, 4 self-centering jaw sets, 8 screws, 1 spindle adapter, 1 storage case. With the variety of included jaws, the csc3000C will mount most turning projects onto your Lathe; including bowls, pens, spindles, other small turning projects, and much more.5" diameter and weighs 2. 60 lbs. Pre-threaded to 1" x 8tpi and includes 3/4" X 16TPI spindle adapter.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height5.25 Inches
Length10.2 Inches
Weight8.6 Pounds
Width5 Inches
Part NumberCSC3000C
Warranty2 Years Under Normal Use

8. PSI Woodworking


PSI Woodworking CLTEZSETC EZ-Glide Bowl Turner's 4pc Toolrest Set, 5/8" Diameter Post 15.875mm

PSI Woodworking #ad - 2-1/2" radius toolrest has 6-1/2" span with 3" post and overall vertical length of 4-1/4"; 2" radius toolrest has 6-3/4" span with 2-1/2" post and overall vertical length of 3-1/2".

S-curve toolrest has 11" span with 3" long post with overall vertical length of 4"; 1-1/2" radius J-curve toolrest has 8" span with 2-3/4" post and overall vertical length of 4-1/4". Ultra smooth, round hardened steel rod top will let you effortlessly glide your chisel or other lathe tool for superior results; Upper support rod will not nick or scratch. Post on all four toolrests is 5/8" diameter 15. 875mm. Reach far into the interior of bowls with ease; Use for bowl exterior, interior hollowing, deep penetration, and sharp corners.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking Products #ad
Height2.55 Inches
Length12.2 Inches
Weight4.35 Pounds
Width5.35 Inches
Warranty2 Years Under Normal Use

9. Aogbra


Break Open Style, 3-Point Woodturning Adjustable Steady Rest for 12" Lathe Swing, lathe Accessory

Aogbra #ad - Please contact me if you have fit questions. It is very helpful for long pieces sticking out to the chuck to support the piece so it does not vibrate and give you a rough surface.

This is a steady rest for a wood lathe. The wheels are made of Non-marring soft material, and it has a high strength to tightly hold the pieces. Our steady rest fits midi-sized lathes that are 12-inch swings. I used knobs on my steady Rest so you needn’t have used an Allen wrench. This steady rest is 100% cnc cut for great accuracy. Easy setup, worked perfectly. The steady rest will fit midi lathes like delta, General, Grizzly, Jet, Rikon, Central Machinery, and Shop Fox.
BrandAogbra #ad
ManufacturerAogbra #ad
Weight9.73 Pounds
Part NumberZXJ-L

10. PSI Woodworking


PSI Woodworking LBUFFSYS 3-Step Lathe Buffing System

PSI Woodworking #ad - Requires a lathe with a minimum of 1/2 horsepower and a heavy duty live tailstock center. Replacement wheels and buffing compound bars are available; tripoli: bar lbuffx1 & linen Wheel LBUFFW1; White Diamond: Bar LBUFFX2 & linen/flannel wheel LBUFFW2; Carbuba Wax: Bar LBUFFX3 & Flannel Wheel LBUFFW3.

System includes: 1 #2mt 16" heavy duty mandrel, carnuba wax, 3 8" fabric buffing wheels Linen, Linen/Flannel Combo, Flannel, 3 buffing compound bars Tripoli, hardware packet, White Diamond, and instructions. This 3-step polishing system enables you to buff your woodturning projects directly on your lathe by mounting the included #2 Morse Taper mandrel in your lathe's headstock. For best results, pre-treat your workpiece with danish oil.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height3 Inches
Length17.5 Inches
Weight7.2 Pounds
Width9.75 Inches
Warrantytwo years