Top 10 Low Voltage Mounting Bracket New Construction – Electrical Brackets

As an Amazon Associate I earn from qualifying purchases.

1. Arlington Industries

#ad

Arlington LVS1 Screw On Single Gang Low Voltage Mounting Bracket 10/pack

#adArlington Industries #ad - Come complete with captive screws, ready to install. Built-in loop for tying off cable. Eliminates pushback. Black Color. Installs cat 5, cable tV, fiber optic, and communications cable in new construction.

Brand	Arlington Industries #ad
Manufacturer	Arlington #ad
Height	1 Inches
Length	11.5 Inches
Width	7.7 Inches
Part Number	1
Model	LVS1-10

2. Arlington Industries

#ad

Arlington LVMB1 1-Gang Low Voltage Mounting Bracket for New Construction, 10-Pack

#adArlington Industries #ad - Non-conductive, smooth plastic prevents damage to cabling; install wiring without an electrical box. Adjusts with 1/2 to 5/8-Inch drywall. Made in USA. Approved for use of 3/4-Inch emt. Ul and csa listed.

Brand	Arlington Industries #ad
Manufacturer	Arlington Industries. Inc #ad
Height	4.15 Inches
Length	1.9 Inches
Weight	0.85 Pounds
Width	3.14 Inches
Part Number	LVMB1-10
Model	LVMB1-10

3. Best Mounts

#ad

Low Voltage Nail-ON Mounting Bracket 1 Gang Multipurpose New Construction – 10 Pack, Black, BestMounts

#adBest Mounts #ad - Built in loop for tying off cable. Come complete with nails, ready to install. Black Color. Built-in loop for tying off cable. Installs cat 5, cable tV, fiber optic, and communications cable in new construction.

Brand	Best Mounts #ad
Manufacturer	Best View Mounts #ad
Height	1.75 Inches
Length	5 Inches
Width	3.75 Inches
Model	BLVN-1-BLACK

4. Best Mounts

#ad

Low Voltage Nail-ON Mounting Bracket 1 Gang Multipurpose New Construction – 10 Pack, Yellow, BestMounts

#adBest Mounts #ad - Nail on, single gang, low voltage mounting bracket for new construction on wood studs. Nail on low voltage Mounting Brackets for New Construction. Allows wall plate to mount flush with wall surface, 25% faster installation over steel or plastic mud rings! Lower cost than extension rings or mud rings. Ready to install - nails come parked in-place, Easy, secure mounting of bracket to studs. Built in loop to tie off cable.

Brand	Best Mounts #ad
Manufacturer	Best View Mounts #ad
Height	1.75 Inches
Length	5 Inches
Weight	0.06 Pounds
Width	3.75 Inches

5. Arlington Industries

#ad

Arlington LVS3 Triple Gang Screw-on Low Voltage Bracket for New Construction

#adArlington Industries #ad - For new Construction Applications. Commonly referred to as a Mud Ring. Integrated cable Tie-Off Loop to Hold Cables behind Box. Flange around box supports sheetrock. Shallow mount - only 080" deep not including stud side nail Flange. Minimum sheetrock or Panel Thickness - 045", two front flanges for Double Stud Support. Run more wire Easier with Brackets vs Boxes. Overall dimensions - 2. 63"l x 7. 81"w x 5. 41"h, side wall thickness - 0080", nailing flange Thickness - 0090" front and side, Gang: 3 Gang. Three gang open back bracket. Front nail Holes for added box support.

Brand	Arlington Industries #ad
Manufacturer	Cmple #ad
Height	4.3 Inches
Length	1.25 Inches
Weight	0.15 Pounds
Width	7.8 Inches
Part Number	1635-N
Model	1081-1635-N

6. Arlington Industries

#ad

Arlington LVS1-1 Low Voltage Screw-On Mounting Bracket, 1-Gang

#adArlington Industries #ad - Overall dimensions - 1. 61"l x 3. 14"w x 5. 34"h, nailing flange thickness - 0090" front and side, panel Cut Out Dimensions - 2.

15" w x 3. 60" h. For new Construction Applications. Impact resistant Plastic results in less breakage on Job site. Commonly referred to as a Mud Ring. Shallow mount - only 055" deep not including stud side nail flange, minimum Sheetrock or Panel Thickness - 045", side wall Thickness - 0080", gang: 1 Gang. Single gang open back bracket. Run more wire Easier with Brackets vs Boxes. Flange around box supports sheetrock. Mounts to wood studs or metal stud with Supplied Screws.

Brand	Arlington Industries #ad
Manufacturer	Arlington Industries #ad
Weight	0.15 Pounds
Part Number	LVS1
Model	LVS1-1
Warranty	Arlington fittings are carefully inspected and our manufacturing process is designed to prevent the possibility of a defective product leaving our plant. In the event any of our products are found to be defective, we will replace them with new product free of charge. The time limit for this warranty is one year following the date of sale or one year after the date of installation, whichever is the earlier date. This warranty does not apply when the product is used for any purpose other than the intended use as described in the Arlington literature. This warranty does not apply when the product is used for any installation which would violate the national electrical code or any code which takes precedence in a particular jurisdiction. Labor is not included.

7. Arlington Industries

#ad

Arlington LVS2 Double Gang Screw-on Low Voltage Bracket for New Construction

#adArlington Industries #ad - Mounts to wood studs or metal stud with Supplied Screws. Overall dimensions - 1. 61"l x 5. 5"w x 5. 34"h, nailing flange thickness - 0090" front and side, Panel Cut Out Dimensions - 4.

12" w x 3. 60" h, gang: 2 Gang. Minimum sheetrock or Panel Thickness - 045", side wall Thickness - 0080". Flange around box supports sheetrock. Impact resistant Plastic results in less breakage on Job site. Shallow mount - only 080" deep not including stud side nail flange. Run more wire Easier with Brackets vs Boxes. Commonly referred to as a Mud Ring. For new Construction Applications. Dual gang open back bracket.

Brand	Arlington Industries #ad
Manufacturer	Cmple #ad
Height	2 Inches
Length	6 Inches
Weight	0.15 Pounds
Width	6 Inches
Part Number	1634-N
Model	1081-1634-N

8. VCE

#ad

5 Pack for Single Gang Wall Plate, VCE Low Voltage Mounting Bracket 1 Gang, Network Cables, Coaxial, Speaker Cables, Telephone Wires, HDMI, Black

#adVCE #ad - Vce single gang 1-gang low voltage mounting bracket - black pack of 5. Package contents:5 x single Gang Low Voltage Mounting Bracket Pieces per plastic bag. Horizontal or vertical mounting, adjusts to fit various wall thickness, the bracket wings secure when mounting screws are tightened. Adjusts to fit 1/4-inch to 1-inch thick wall board, paneling, or drywall; designed to mount wall plates flush. Easy to install, tV, for mounting low voltage wiresphone, internet, video.

Brand	VCE #ad
Manufacturer	VCE #ad
Height	0.15 Inches
Length	3.98 Inches
Weight	0.24 Pounds
Width	2 Inches
Part Number	A177BK-5P-CA
Model	A177BK-5P-US

9. Arlington Industries

#ad

Arlington LVN2-1 Low Voltage Nail-On Mounting Bracket, 2-Gang

#adArlington Industries #ad - Easy to secure to studs. For new construction only, Not for retrofit. Built in loop for tying off cable. Ready to install- nails come parked in place. 4. 17h by 5. 492w by 1. 50d.

Brand	Arlington Industries #ad
Manufacturer	Arlington Industries #ad
Height	4.17 Inches
Length	1.25 Inches
Weight	0.51 Pounds
Width	5.49 Inches
Part Number	LVN2-1
Model	LVN2-1
Warranty	Arlington fittings are carefully inspected and our manufacturing process is designed to prevent the possibility of a defective product leaving our plant. In the event any of our products are found to be defective, we will replace them with new product free of charge. The time limit for this warranty is one year following the date of sale or one year after the date of installation, whichever is the earlier date. This warranty does not apply when the product is used for any purpose other than the intended use as described in the Arlington literature. This warranty does not apply when the product is used for any installation which would violate the national electrical code or any code which takes precedence in a particular jurisdiction. Labor is not included.

10. ARLINGTON

#ad

Arlington LV2-1CS Low Voltage Mounting Bracket, 1-Pack, 2-Gang

#adARLINGTON #ad - Designed to mount wall plates flush. Mounting brackets offer specially designed screw holes that deliver a better looking, easy to install job.

Designed to mount wall plates flush. 1-pack of low Voltage Mounting Brackets. Adjusts to fit 1/4 inch to 1 Inch thick wall board, paneling or drywall. Adjusts to fit 1/4-inch to 1-Inch thick wall board, paneling or drywall. Mounting brackets offer specially designed screw holes, for a better looking, easy to install job. 1-pack of low Voltage Mounting Brackets. Horizontal or vertical mounting; UL/CSA listed. Horizontal or vertical mounting; UL/CSA listed.

Brand	ARLINGTON #ad
Manufacturer	Arlington Industries #ad
Height	0.3 Inches
Length	5.5 Inches
Weight	0.3 Pounds
Width	4.2 Inches
Part Number	LV2-1CS
Model	LV2-1CS
Warranty	Arlington fittings are carefully inspected and our manufacturing process is designed to prevent the possibility of a defective product leaving our plant. In the event any of our products are found to be defective, we will replace them with new product free of charge. The time limit for this warranty is one year following the date of sale or one year after the date of installation, whichever is the earlier date. This warranty does not apply when the product is used for any purpose other than the intended use as described in the Arlington literature. This warranty does not apply when the product is used for any installation which would violate the national electrical code or any code which takes precedence in a particular jurisdiction. Labor is not included.