As an Amazon Associate I earn from qualifying purchases.
Astro Pneumatic Tool #ad - Air curtain” design to minimize overspray and pollution with superior transfer efficiency to reduce paint consumption. Forged body provides longer tool life and anodized body for corrosion protection with internal coated passages.
SPRAYIT #ad - Fan pattern: 4. 0'' to 109''. Working pressure 28-45 pSI. Air consumption 2. 4 to 3. 9 cfm @ 30 psi. Maximum pressure 60 PSI. Sp-33000 gravity feed spray gun one-piece lightweight aluminum gun body with 20 oz.
Nikou #ad - Great for spraying where you have reduced air consumption due to small air compressor. Lvlp spray gun low volume low pressure, comes with a plastic non-drip cup. Suitable for lightweight material handling to handle a wide range of viscosity water or oil based materials for general purposes.
Ouya #ad - Specs: working pressure 36PSI; Average air consumption 1. 25 cfm. Lvlp spray gun use of lower volume of air finely atomizes paint creating a smooth finish with minimum overs pray. This means very little over spray will be produced. Smooth surface treatment, light weight, small size, easy to carry.
HIUHIU #ad - Save paint costs and environmental hazards. The lvlp spray gun uses a smaller amount of air to finely atomize the paint, resulting in a smooth appearance and minimizing overspray. 9 air cap holes. Suitable for water-based coatings or other medium viscosity coatings.
TCP Global #ad - Contains a stainless Steel Needle and Nozzle Set. Gun has a full baffle head assembly that enables it to produce a Fully Atomized and Consistent Spray Pattern for a Smooth Professional Finish! Full one Year Warranty. The 1. 3 mm fluid tip is ideal for optimal Atomizing when Spraying Base-coats, Clear-coats and other Light to Medium Viscosity Materials.
1. Astro Pneumatic Tool
#adAstro EVOT14 EuroPro Forged LVLP Spray Gun with 1.4mm Nozzle and Plastic Cup
#adMore information #ad
Innovative, advanced EVO-T technology Patented providing finest atomization & classic quality. Stainless steel needle and fluid tip with slick finish for faster & easier cleaning. Soft trigger pull to reduce fatigue, lubricated adjustment knobs for better control, and advanced CNC machining to avoid the need for gaskets behind the tip.| Brand | Astro Pneumatic Tool #ad |
| Manufacturer | Astro Pneumatic #ad |
| Height | 5 Inches |
| Length | 9 Inches |
| Weight | 0.72 Pounds |
| Width | 6.7 Inches |
| Part Number | EVOT14 |
| Model | EVOT14 |
More information #ad
2. SPRAYIT
#adSPRAYIT SP-33000 LVLP Gravity Feed Spray Gun
#adSPRAYIT #ad - Separate and adjustable fluid, fan pattern and air controls for precise application. Working pressure 28-45 pSI. Air consumption 3. 5 to 3. 9 cfm @ 30 psi. Maximum pressure 60 PSI. Fan pattern: 7. 0'' to 109''. One-piece lightweight aluminum gun body with 20 oz. 06 l plastic cup.More information #ad
| Brand | SPRAYIT #ad |
| Manufacturer | California Air Tools- Home Improvement #ad |
| Height | 13 Inches |
| Length | 6 Inches |
| Weight | 0 Pounds |
| Width | 4 Inches |
| Part Number | SP-33000 |
| Model | SP-33000 |
| Warranty | 1 Year Warranty |
More information #ad
3. SPRAYIT
#adSPRAYIT SP-33500K LVLP Gravity Feed Spray Gun Kit
#adMore information #ad
06 l plastic cup. Sp-33500 gravity feed mini spray Gun One-piece lightweight aluminum gun body with 120cc plastic cup.| Brand | SPRAYIT #ad |
| Manufacturer | SPRAYIT #ad |
| Height | 12 Inches |
| Length | 5 Inches |
| Width | 4 Inches |
| Part Number | SP-33500K |
| Model | SP-33500K |
| Warranty | 1 Year Limited Warranty |
More information #ad
4. Nikou
#ad1/4 Air Inlet LVLP Paint Spray Gun Air Sprayer Gravity Feed Type 1.3mm Nozzle, Air Spray Gun
#adMore information #ad
Adjustable spray width and fluid, increased transfer efficiency allows a reduced spray mist. Die cast aluminium spray gun with 2 step trigger control for accurate results to be achieved each time.| Brand | Nikou #ad |
| Manufacturer | Nikou #ad |
| Weight | 1.72 Pounds |
| Part Number | ES810-419 |
More information #ad
5. AEROPRO USA
#adAEROPRO USA R500 LVLP Gravity Feed Air Spray Gun, 1.5 mm Nozzle
#adAEROPRO USA #ad - Pattern width: 7" - 11" 180 - 280 mm; paint capacity: 203 oz 600 cc. Uses a lower volume of air and finely atomizes paint creating a smooth finish with very little overspray, and has a stainless steel needle and nozzle that will accommodate a variety of coatings and features an air volume, paint volume and spraying pattern adjustable settings.More information #ad
Best used for spray painting of middle or high adhesive for surface finishing and middle coating. Air consumption: 3. 0 - 3. 9 cfm; operating pressure: 29 - 51 psi 2. 0 - 3. 5 bar; connection: 1/4" NPT. It can operate at less than 10 psi at the nozzle cap as compared to HVLP which operates at 10 psi at the air cap.| Brand | AEROPRO USA #ad |
| Manufacturer | AEROPRO USA #ad |
| Height | 5 Inches |
| Length | 9 Inches |
| Width | 6 Inches |
| Part Number | R500 |
| Model | R500 |
More information #ad
6. Ouya
#ad200cc Capacity, Ouya KA-F-2-F Mini Gravity Feed Spray Paint Gun with 0.5mm Nozzle
#adMore information #ad
Spray gun can operate at less than 10 psi at the nozzle cap as compared to HVLP which operates at 10 psi at the air cap and is usually pushed higher. Saving on paint cost and environment hazrds. All steel gun body, rust-resistant stainless steel nozzle and cup for durability and longevity.| Brand | Ouya #ad |
| Manufacturer | Ouya #ad |
| Height | 11.81 Inches |
| Length | 5.91 Inches |
| Weight | 0.88 Pounds |
| Width | 3.94 Inches |
| Part Number | KA-F |
More information #ad
7. AEROPRO USA
#adAEROPRO USA R100 LVMP Gravity Feed Air Spray Gun, 0.8 mm Nozzle
#adAEROPRO USA #ad - Spray pattern width: 4" - 6" 100-150 mm; Paint capacity: 4 oz 120 cc. Used for spraying autos, furniture, mechanical equipment, and hotel and commercial building decorating.More information #ad
Air consumption: 2. 4 - 3. 3 cfm; operating pressure: 29 - 52 psi 2. 0-3. 5 bar; connection: 1/4" NPT. Capable of handling most viscous materials within a small spray range. Great for automotive clear coating and base coating.| Brand | AEROPRO USA #ad |
| Manufacturer | AEROPRO USA #ad |
| Weight | 1 Pounds |
| Part Number | R100 |
| Model | R100 |
More information #ad
8. HIUHIU
#adHIUHIU Car Paint Spray Gun 1.3mm Nozzle LVLP air Spray Gun
#adMore information #ad
Compared with hvlp, the working pressure of the spray gun at the nozzle cover can be lower than 10 psi, while the working pressure of the HVLP at the air cover is 10 psi, which is usually pushed higher. This means that there is almost no overspray. The coating speed is 10-12m/min. Suitable for spraying on various surfaces.| Brand | HIUHIU #ad |
| Manufacturer | HIUHIU #ad |
| Part Number | 143-472-742 |
More information #ad
9. TCP Global
#adTCP Global® Brand Professional 1.3mm HVLP Spray Gun-gravity Feed-auto Paint Basecoat Clearcoat with Air Regulator G6600-13
#adMore information #ad
Tcp global brand high performance hvlp spray gun with a 1. 3 mm fluid tip, 1 liter Aluminum Cup and a Air Regulator. Spray gun has control knobs for full adjustment over Spray Pattern, Fluid Control and Air Pressure.| Brand | TCP Global #ad |
| Manufacturer | TCP Global #ad |
| Weight | 4 Pounds |
| Part Number | G6600-13 |
| Model | TCP G6600-13 |
More information #ad
10. SPRAYIT
#adSPRAYIT SP-31000 LVLP Siphon Feed Spray Gun
#adSPRAYIT #ad - Maximum pressure 60 PSI. Air consumption 3. 5 to 3. 9 cfm @ 30 psi. One-piece lightweight aluminum gun body with 1000cc aluminum cup. Separate and adjustable fluid, fan pattern and air controls for precise application. Working pressure 28-45 pSI. Fan pattern: 7. 0'' to 109''.More information #ad
| Brand | SPRAYIT #ad |
| Manufacturer | SPRAYIT #ad |
| Height | 12 Inches |
| Length | 4.5 Inches |
| Width | 7 Inches |
| Part Number | SP-31000 |
| Model | SP-31000 |
| Warranty | 1 Year Limited Warranty |
More information #ad
