Top 10 Lynx Dovetail Saw – Hand Tools

As an Amazon Associate I earn from qualifying purchases.

1. Lynx

 #ad

Lynx LDB8R 8-Inch 20 tpi Rip Dovetail Saw

#ad
Lynx #ad - Made in Sheffield, England. Item can be re-sharpened. Made from high quality carbon steel with a beech handle. Heavy folded brass back gives perfect weight and tension to the blade. 8" dovetail saw 20tpi for Rip work in dovetail joints and other fine woodworking tasks.
BrandLynx #ad
ManufacturerThomas Flinn #ad
Height1.3 Inches
Length14 Inches
Width5 Inches
Part NumberLDB8R
ModelLDB8R

2. Lynx / Taytools

 #ad

Lynx Thomas Flinn Taytools British 10 inch Tenon Saw with Stained Beech Handle 15 TPI and Filed for Crosscutting

#ad
Lynx / Taytools #ad - Maximum depth of cut is 2-3/8 inches. The folded brass back means the blade is held under tension offering excellent rigidity and balance. This saw is made by thomas Flinn of Sheffield England the last traditional saw and plane maker in the UK. Saw plate is made from sheffield allow spring steel and taper ground providing a good balance of edge durability and ease of sharpening. Handle is stained European Beech with brass button screws. The saw plate is held straight and true by a thick, solid brass spine. 10 inch saw plate has 15 tpi and filed for crosscutting.
BrandLynx / Taytools #ad
ManufacturerThomas Flinn and Company LTD #ad
Part NumberLTB10
ModelLTB10

3. Pax / Taytools

 #ad

1-5/8 Inch Wide Plate, Thomas Flinn Pax Taytools 10 Inch Gent Dovetail Saw, Walnut Handle, Solid Rolled Brass Back, 20 TPI

#ad
Pax / Taytools #ad - The saw plate is made from high carbon allow steel for durability and ease of sharpening. Comes with 20 TPI. Handle had solid brass ferrule. This saw is made by thomas Flinn of Sheffield England the last traditional saw and plane maker in the UK. Teeth can be resharpened. Saw plate has a. 500 inch wide x 0160 inch thick solid brass rolled back which stiffens the blade and adds weight for smooth and accurate cutting. Kerf is 0028 inches wide. Saw has a 10 long x 1-5/8 inch wide x 0022 inch thick saw plate. The solid walnut handle is 1-1/4 inches in diameter and 5 inch long.
BrandPax / Taytools #ad
ManufacturerThomas Flinn and Company LTD #ad
Part NumberGS10
ModelGS10

4. PAX

 #ad

Thomas Flinn Pax 1776 10" Dovetail Saw Brass Back 15 TPI Filed Rip

#ad
PAX #ad - 10" saw plate made from sheffield allow spring steel with 15 TPI filed for rip cutting. Made by thomas flinn of Sheffield England the last traditional saw and plane maker in the UK. Hand finished pistol grip open Maple handle, Danish oiled for ultimate comfort. Mirror finished folded brass back with traditional style roll mark "PAX 1776". Hand sharpened and individual tested before leaving the factory.
BrandPAX #ad
ManufacturerThomas Flinn and Company LTD #ad
Weight1 Pounds
Part NumberVP10

5. Saw Trax

 #ad

Saw Trax, Floating Router Insert for Saw Trax Panel Saw

#ad
Saw Trax #ad - Provides consistent depth Dadoes on warped, twisted or bowed material. Uses porter cable or Bosch Routers, can be adopted to any router. Can do blind dados. Turns your saw trax panel saw into a Panel Router! Uses 12 sealed bearings on the insert for smooth drop down.
BrandSaw Trax #ad
ManufacturerSaw Trax Mfg. Inc. #ad
Part NumberFLTR
ModelFLTR

6. Crown

 #ad

CROWN 188 8-Inch 203-mm Dovetail Saw with Full Handle

#ad
Crown #ad - Country of Origin: China. Item package dimension: 16. 0" l x 6. 0" w x 1. 25" h. Model number: 188. Item package weight: 1. 180004 lb.
BrandCrown #ad
ManufacturerCrown #ad
Weight1.1 Pounds
Part Number188
Model188

7. Crown

 #ad

Full Handle, CROWN 195 12" 305mm Tenon Saw Brass Back, 13 TPI

#ad
Crown #ad - 13 teeth per inch. Exceptional quality tool from Crown Hand Tools Ltd, Sheffield, England. Fagus sylvatica Germany Handle secured with Screws. Resharpenable High Carbon Steel Blade. Stiffened with Brass Back.
BrandCrown #ad
ManufacturerCrown #ad
Height1.2 Inches
Length17 Inches
Width6 Inches
Part Number195
Model195

8. Sawtrax Mfg

 #ad

Model Number MDFC, Saw Trax Mid-Fence for all Saw Trax Vertical Panel Saw

#ad
Sawtrax Mfg #ad - All-steel design, no warping or splintering. Shelf easily comes on and off. Includes 2 mid-fence lips one for each side of the machine's fencing. Allows you to cut small pieces at waist level.
BrandSawtrax Mfg #ad
ManufacturerSaw Trax #ad
Weight30 Pounds
Part NumberMDFC
ModelMDFC

9. Lynx / Taytools

 #ad

Stained Beech Handle 4.5 TPI Filed for Rip Cutting, Lynx Garlick Taytools Thomas Flinn British 24” Rip Saw with Taper Ground Blade

#ad
Lynx / Taytools #ad - This greatly reduced binding in the cuts. 0005 inches from the teeth to the back of the saw. 24” saw plate has 4. 5 tpi and filed for rip cutting. The saw plate is taper-ground and gets progressively thinner approx. Saw plate is made from sheffield allow spring steel and taper ground providing a good balance of edge durability and ease of sharpening. This saw is made by thomas Flinn of Sheffield England the last traditional saw and plane maker in the UK. Handle is stained European Beech with brass button screws.
BrandLynx / Taytools #ad
ManufacturerThomas Flinn and Company LTD #ad
Part NumberLRB24
ModelLRB24

10. PAX

 #ad

Pax 8" Dovetail Saw Crosscut

#ad
PAX #ad - Crosscut version for cutting across the grain. Made in sheffield, UK. Mirror polished brass back. Hand sharpened and re-sharpenable blade. Two tone beech handle with solid brass screws and medallion. 8" dovetail saw with 20 teeth per inch.
BrandPAX #ad
ManufacturerThomas Flinn & Co Ltd #ad
Height4.72 Inches
Length11.81 Inches
Width1.18 Inches
Part NumberPD8