As an Amazon Associate I earn from qualifying purchases.
Peltor #ad - Durable recessed microphones to reduce wind noise. Re-engineered headband for improved fit and comfort. Low-profile cups for rifle/shotgun use.
PROHEAR #ad - So please be patient when installing and then you will get upgraded earmuffs. Compatible models: these are upgraded gel ear pads that they could use on a wide variety of 3m peltor headsets including 3M WorkTunes hearing protectors, 033/PROHEAR 037, BUT THEY DON'T FIT THE Optime 105 Earmuffs H10A + ZOHAN EM042, 033 headsets and provide significantly better softness and sealing.
Package&attention: includes gel ear pad with plastic adapter plates* 2 for earmuffs We specifically widened and thickened the plastic base to increase the tightness of your headsets. Easy&quick installation: you should remove the original ear pads together with the plastic base, then put PROHEAR gel ear pads with plastic base into the earmuff and press down on the edge of plastic base of earpad to secure it Please check the images which would show you how to replace and install the ear pads.
And the anti-sweat gel ear pads are easy to clean, as the pads have a pinhole-sized air vent on the side of the pad to allow proper functioning. Designed for lasting: prohear gep01 gel ear cushions have an ultra thin sheet of polyurethane provides a supple outer skin. We have your back: we make customer satisfaction as our top priority, If you are not satisfied with the GEP01 gel pads or feel that the ear pads do not fit your headsets, then please do not hesitate and reach out to us through Amazon at any time for either a refund or replacement.
3M Safety #ad - Premium gel cushions are super-soft and conformable for enhanced comfort. Replace worn or damaged ear cushions. Designed for worktunes connect 90543, ultimate 97042, peltor sport shotgunner ii 97040, tactical 500 tac500, bull’s eye 97041, Tactical 300 TAC300, 3m pro-grade 90565, WorkTunes Connect + Gel Cushions 90544, 3M Pro-Grade Hi-Viz 90566.
Peltor #ad - Contains 1-Earmuff. Comfortable foam ear cushions. Peltor sport's highest noise reducing earmuff at NRR of 30 dB. Lightweight design for comfort and extended wear. Adjustable, vented headband design reduces heat build and improves comfort when worn with caps & hats.
Peltor #ad - Equipped with stereo microphones and independent volumes controls on each cup. Nrr 19db. Active hearing protection. Available in both headband and neckband styles. Low-profile cup design helps minimize gun stock interference.
3M #ad - Ambient listening electronics provide distortion free amplification of low level sounds up to 14-dB. Slim line, folding headband for compact storage. Noise reduction rating of 20-dB. Individual on/off and volume control knob. 4 aaa batteries 2 per cup for over 300 hours of operation.
PROHEAR #ad - And if you have any problems, we'll be glad to help you. Amplifies ambient noise up to 4xprohear 056 electronic shooting earmuff use more advanced internal chips. Advanced electronic shooting ear muffshigh noise reduction rating 30 NRR at a lightning-fast 001 s reactionattack time, which is 2 times faster than most shooting earmuffs on the market, designed for handgun and pistol shooters.
Professional shooting earmuffs manufacturer►unlike the others, please free to contact us, we've spent the past 15 years solely focused on hearing protection and optimization.
Built-in 2 directional microphones amplify range commands and other ambient sounds to a safe 82 dB; Perfect for indoor ranges, covered ranges and other extremely loud shooting environments. High noise reduction rating►thick design blocks out noise at 30 db ►vertical pulley design is convenient for quick adjustment in various situations ►3. 5mm connection cord for MP3 players and scanners. We stand by the quality of our shooting earmuffs and are glad to provide a 1-YEAR WARRANTY at no additional cost.
Armorwerx #ad - Fits comtac 1, sport 100, sport 300, sport 500, comtac 2, comtac 4, comtac 3, Rangeguard and more. Includes removable Multicam cover and boom mic compatible guide arm.
3M #ad - Easy to replace: when used regularly, 3M recommends replacing the cushions at least twice a year to help maintain consistent attenuation, hygiene and comfort. Helps reduce pressure: The silicone gel helps reduce pressure points, e.
G. Noise attenuation: maintains a noise-reducting seal around ears. Helps enhance comfort: Consist of a soft and thin polyurethane skin filled with silicone gel. When using eyewear.
1. Peltor
#adNRR 22 dB, Shooting and Hunting, TAC100-OTH, Ear Protection, Ideal for the Range, Peltor Sport Tactical 100 Electronic Hearing Protector
#adMore information #ad
| Brand | Peltor #ad |
| Manufacturer | Green Supply #ad |
| Height | 11.38 Inches |
| Length | 4.62 Inches |
| Weight | 0.86 Pounds |
| Width | 7 Inches |
| Part Number | TAC100-OTH |
| Model | TAC100-OTH |
| Warranty | Manufacturer Warranty |
More information #ad
2. PROHEAR
#adPROHEAR GEP01 Gel Ear Pads Upgraded for 3M PELTOR Headsets
#adPackage&attention: includes gel ear pad with plastic adapter plates* 2 for earmuffs We specifically widened and thickened the plastic base to increase the tightness of your headsets. Easy&quick installation: you should remove the original ear pads together with the plastic base, then put PROHEAR gel ear pads with plastic base into the earmuff and press down on the edge of plastic base of earpad to secure it Please check the images which would show you how to replace and install the ear pads.
More information #ad
Our gel ear pads could last for several years of normal use, you could clean the outer surface with soapy water as necessary, but do not submerge, not as easily damaged as faux leather or vinyl pads. And the anti-sweat gel ear pads are easy to clean, as the pads have a pinhole-sized air vent on the side of the pad to allow proper functioning. Designed for lasting: prohear gep01 gel ear cushions have an ultra thin sheet of polyurethane provides a supple outer skin. We have your back: we make customer satisfaction as our top priority, If you are not satisfied with the GEP01 gel pads or feel that the ear pads do not fit your headsets, then please do not hesitate and reach out to us through Amazon at any time for either a refund or replacement.
| Brand | PROHEAR #ad |
| Manufacturer | PROHEAR #ad |
| Height | 0.87 Inches |
| Length | 4.3 Inches |
| Weight | 0.19 Pounds |
| Width | 3.3 Inches |
| Part Number | GEP01 |
| Model | GEP01 |
| Warranty | 1 Year warranty |
More information #ad
3. 3M Safety
#ad90565 and 90566, Peltor Sport 97040, works with WorkTunes 90543, 97042, 3M Gel Hearing Protector Replacement Ear Cushion Hygiene Kit, 97041, 1 pair, TAC500, TAC300
#adMore information #ad
Extend the life of earmuffs with 1 pair of replacement cushions. Inspect ear muffs regularly for cracked or worn parts - especially the cushions.| Brand | 3M Safety #ad |
| Manufacturer | 3M #ad |
| Height | 6.63 Inches |
| Length | 4.25 Inches |
| Width | 2.38 Inches |
| Part Number | GEL-HYG |
| Model | GEL-HYG |
| Warranty | Limited |
More information #ad
4. 3M
#ad1 pr/cs Price is per CASE, 3MTM PeltorTM ARC, Left & Right Side Attachments
#ad3M #ad - 3mtm peltortm arc, left & right side attachments You are purchasing the Min order quantity which is 1 Case.More information #ad
| Brand | 3M #ad |
| Manufacturer | 3M Peltor #ad |
| Height | 2.5 Inches |
| Length | 4.5 Inches |
| Weight | 0.02 Pounds |
| Width | 6.7 Inches |
| Part Number | 70071612389 |
| Model | ARC |
More information #ad
5. Peltor
#adEar Protection ideal for rifles, Peltor Sport Ultimate Hearing Protector, NRR 30 dB, shotguns,
#adMore information #ad
| Brand | Peltor #ad |
| Manufacturer | 3M CHIMD #ad |
| Height | 8.18 Inches |
| Length | 3.9 Inches |
| Weight | 0.77 Pounds |
| Width | 5.43 Inches |
| Part Number | 97042-PEL-6C |
| Model | 97042-PEL-6C |
More information #ad
6. Peltor
#adLong Range Shooters, Tactical 65 Headset, Hearing Protectotion by Peltor, Neckband, Minimize Gun Stock Interference, Stereo Microphones
#adMore information #ad
| Brand | Peltor #ad |
| Manufacturer | Green Supply #ad |
| Height | 6 Inches |
| Length | 4.3 Inches |
| Weight | 0.49 Pounds |
| Width | 5.8 Inches |
| Part Number | 97043-00000 |
| Model | 97043 |
| Warranty | Manufacturer Warranty |
More information #ad
7. 3M
#adOlive Green, Hearing Protection, Great for hunters and shooters, Ear Protection, NRR 20 dB, 3M Peltor Tactical 6-S Slim Line Electronic Headset with Audio Input Jack
#adMore information #ad
| Brand | 3M #ad |
| Manufacturer | Peltor #ad |
| Height | 4 Inches |
| Length | 6 Inches |
| Weight | 0.49 Pounds |
| Width | 4 Inches |
| Part Number | MT15H67FB |
| Model | MT15H67FB |
| Warranty | Y |
More information #ad
8. PROHEAR
#adAirsoft, Black, Sound Amplification 4 Times Noise Reduction Hearing Protector Earmuffs for Gun Range, PROHEAR 056 30dB Highest NRR Electronic Shooting Ear Protection Muffs, Hunting
#adProfessional shooting earmuffs manufacturer►unlike the others, please free to contact us, we've spent the past 15 years solely focused on hearing protection and optimization.
More information #ad
Extraordinary detail ►prohear 056 powered by 2 aaa batteries not included ►ultra-luxury leather bag makes it easy to carry and keep the earmuffs clean► Soft headband makes you comfortable all day ► Soft ear pads are designed for long-time wearing without more headaches. Built-in 2 directional microphones amplify range commands and other ambient sounds to a safe 82 dB; Perfect for indoor ranges, covered ranges and other extremely loud shooting environments. High noise reduction rating►thick design blocks out noise at 30 db ►vertical pulley design is convenient for quick adjustment in various situations ►3. 5mm connection cord for MP3 players and scanners. We stand by the quality of our shooting earmuffs and are glad to provide a 1-YEAR WARRANTY at no additional cost.
| Brand | PROHEAR #ad |
| Manufacturer | PROHEAR.LLC #ad |
| Weight | 1 Pounds |
| Model | PROHEAR 056 |
More information #ad
9. Armorwerx
#adReplacement Headband Compatible With Peltor Comtac Ear Muffs
#adMore information #ad
Perfect for converting Peltor neckband earmuff models into over-the-head models. Made by armorwerx a division of The Mercenary Company. Complete replacement headband for 3M Peltor Comtac headsets.| Brand | Armorwerx #ad |
| Manufacturer | The Mercenary Company #ad |
More information #ad
10. 3M
#ad3M PELTOR Camelback Gel Sealing Rings HY80, Comfort Replacement Earmuff Cushions, Black, Easy to Replace
#adG. Noise attenuation: maintains a noise-reducting seal around ears. Helps enhance comfort: Consist of a soft and thin polyurethane skin filled with silicone gel. When using eyewear.
More information #ad
Compatible with: 3m peltor litecom plus headsets, 3m peltor ws 100 electronic headsets, 3m peltor litecom pro ii headsets, 3m peltOR WS Tactical Sport Electronic Headsets, 3m peltor mt series two-way headsets, 3m peltor ht series listen-only headsets, 3M PELTOR Ground Mechanic WS Solutions, 3M PELTOR TacticalPRO Electronic Headsets, 3M PELTOR MT Ground Mechanic Headset. See user Instructions for attenuation data.| Brand | 3M #ad |
| Manufacturer | 3M Personal Protective Equipment #ad |
| Height | 1.97 Inches |
| Length | 3.94 Inches |
| Weight | 0.35 Pounds |
| Width | 3.94 Inches |
| Part Number | HY80 |
| Model | HY80 |
More information #ad
