Top 10 Pot Filler Stainless Steel – Kitchen Sink Pot Filler Faucets

As an Amazon Associate I earn from qualifying purchases.



MSTJRY Pot Filler Faucet Wall Mount Commercial Kitchen Faucets Stainless Steel Stretchable Double Joint Swing Arm Single Hole Two Handle Kitchen Sink Faucet

MSTJRY #ad - 1/2-inch - 14 npt inlet single hole stainless steel wall mount pot filler faucet, install it with heavy duty plumbing tape to avoid leaking. 360 degree rotation.

Double valves for double flow control; dual swing joints allows the pot filler to easily fold away when not in use. You only need to stretch and rotate the joints when you use several pots placed in different directions. Polished inner surface to insure the Most Hygienic Water Supply Faucet Available. Max 3. 5 gpm@ 60 psi water flow, swiss neoperl aerator Provides Steady Pressure with Straight and Consistent Water Flow, that will quick fill up a pot. Dual swing joints with approximately 21" extension. The pot filler often installs the height upon your pots about 2 -3inches.
BrandMSTJRY #ad
ManufacturerMSTJRY #ad
Height10.2 Inches
Length11.9 Inches
Width3.4 Inches

2. Geyser


Geyser GF46-S Andorra Series Stainless Steel Wall Mount Two Handle Pot Filler Faucet Brushed Stainless Steel Finish

Geyser #ad - Limited lifetime Warranty Stainless Steel Finish. Precision flühs cartridge Tested to 500, 000 Cycles. Designed with two Swivel Joints for Maximum Maneuverability and Reach. Dual lever design to Control Water Flow from Nozzle or Wall. 100% 304 stainless steel Construction with a Brushed Stainless Steel Finish.
BrandGeyser #ad
ManufacturerGeyser #ad
Part NumberGF46-S

3. CWM


CWM Pot Filler Faucet Stainless Steel Commercial Wall Mount Kitchen Sink Faucet Folding Stretchable with Single Hole Two Handles

CWM #ad - Equipped with cwm aerator provides a steady pressure and straight consistent 3. 5 gpm water flow; 100% factory high pressure and low pressure tested. Lead free construction; pure stainless steel construction with Polished Inner Surface, every drop of water passing through the pot filler is natural, no harmful materials added.

Constructed by 1. 5mm thick sus 304 stainless steel tubes; Equipped with solid brass ceramic cartridge; No Leak compliant. Two valves for double flow control; dual swing joints allows the pot filler to easily fold away when not in use. Npt 1/2" conical connection thread without brass fittings, can prevent water leakage without using water tape; NPSM 1/2" connection thread, need to use water tape; Fit for US Standard, with a installation flange for stability.
BrandCWM #ad
ManufacturerIMLEZON #ad
Height1.7 Inches
Length15 Inches
Width12.9 Inches
Part NumberIM-US-KH42



JZBRAIN Pot Filler Faucet Wall Mount Stainless Steel Commercial Pot Filler 5.5 GPM Heavy Duty Style with Folding Stretchable Double Joints 2 Handles

JZBRAIN #ad - Hight quality pot filler faucetconstructed by 1. 5mm thick sus 304 stainless steel tubes; with solid brass ceramic cartridge. Hight flow rate pot fillermax 5. 5 gpm, creates perfect aerated stream, equipped with swiss neoperl Aerator provides a steady pressure and straight consistent water flow, quiet and no-splash.

High density solid brass material, apply special lead-free filtering technique, ensures durability and easy cleaning. This is the pot filler you need for cooking happy time. All installation kits are included in the package. Wall mount pot filler faucetone hole wall mount design easy to install; Water inlet is a 1/2'' - 14 NPT female. Stainless steel pot filler faucetmade of sus 304 stainless steel, no rust; With polished Inner surface, sturdy and no leak; Lead-free construction, anti-oxidation, ensuring that every drop of water flowing from the faucet is clean and natural.

Folding wall munt faucetthe pot filler faucet with 21 inch foldable swivel arm design; 360 Degrees Swivels joints makes it easier to add water, easily switch spout over the pot and sink of your kitchen cooktop, suitable for almost home kitchens.
BrandJZBRAIN #ad
ManufacturerJZBRAIN #ad
Height8 Inches
Length21 Inches
Width0.8 Inches
Part NumberKEC-003PF



Gerber D205012SS Danze Wall Mount Pot Filler, 20.13"L x 9.88"W x 2.75&Quoth, Stainless Steel

GERBER #ad - Two ceramic disc valves. Swing spout with shut off and control valve. Designed for cold water hook up. Single hole wall mount; 1/2-Inch - 14 NPT inlet. 5-1/2-inch spout height; 20-1/8-inch overall reach; 17-1/16-Inch spout reach from wall.
BrandGERBER #ad
ManufacturerGerber #ad
Height20.12 Inches
Length0.02 Inches
Weight6.54 Pounds
Width9.87 Inches
Part NumberD205012SS
WarrantyLimited Lifetime

6. Pfister


Wall Mounted Kitchen Faucet, Stainless Steel GT533TDS, Pfister Port Haven Pot Filler Faucet

Pfister #ad - Potfiller meets ada/ansi a117. 3. Mounting hardware included. Product complies with nsf/ansi/can 61: q≤1 certified and conforms with lead content requirements for “lead-free” plumbing as defined by California, Maryland, Vermont, and Louisiana state laws and the U.

S. Safe drinking Water Act. All-metal construction wall mounted pot filler. 1 requirements for accessibility to disabled persons. 1-hole installation with 1-3/8” min to 1-1/2” max deck hole opening. Swivels 360 degrees and neatly stows against wall when not in use. 0 gpm flow rate. This wall mount pot filler faucet features a swing out design with two points of rotation and dual shut off levers. Ceramic disc valve technology for reliable performance. Cold water installation recommended.
BrandPfister #ad
ManufacturerPfister #ad
Height2.2 Inches
Length16.5 Inches
Weight4.2 Pounds
Width10.7 Inches
Part NumberGT533-TDS
WarrantyPfister Pforever Warranty covers finish and function for life

7. CWM


IMLEZON Stainless Steel Pot Filler Faucet Commercial Wall Mount Kitchen Sink Faucet Folding Stretchable with Single Hole Two Handles

CWM #ad - Practical design: there are two valves for double flow control, Double jointed spout water extends up to 21" and retracts when not in use. Hygienic: pure stainless steel construction with Polished Inner Surface, every drop of water passing through the pot filler is natural, without lead or other harmful materials added.

Heavy duty stainless steel pot filler : constructed by 1. 5mm thick sus 304 stainless steel tubes; Equipped with solid brass ceramic cartridge. Assemble dimension 1/2-inch - 14 npt inlet Single hole Stainless Steel Wall Mount Pot Filler Faucet; use only for cold water. Great water flow: max 5. 5gpm, equipped with Swiss Neoperl Aerator provides a steady pressure and straight consistent water flow.
BrandCWM #ad
ManufacturerIMLEZON #ad
Height10 Inches
Length10 Inches
Weight100 Kilograms
Width10 Inches
Part NumberIM-US-KH54

8. Pfister


Pfister GT533-PFS Lita 2-Handle Wall Mount Pot Filler, Stainless Steel

Pfister #ad - Ada compliant. 2. 2 gpm @ 60psi. 2- swivel point location for full and flexible positioning across multiple burners. Pfister pforever Warranty covers finish and function for life. Nsf lead free Certified.
BrandPfister #ad
ManufacturerPfister #ad
Height24.5 Inches
Length11.5 Inches
Weight5.8 Pounds
Width10.5 Inches
Part NumberGT533PFS

9. Awinner


Awinner Pot Filler Faucet Wall Mounted Stainless Steel Folding Kitchen Sink Faucet with 2 Handle Double Joint Swing Arm Single Hole Commercial NPT,Cold or Hot Water

Awinner #ad - High-quality material this pot filler faucet is made of stainless steel. Package includes the package includes: pot filler faucet*1, bubble wrench*1, Teflon tape*1, decorative cover*1. Please note: the tap is only for cold water or only for hot water. The handles are all designed downward to avoid collision with the cabinet.

Easy to install the single-hole wall-mounted kitchen faucet is easy to install, and you don’t need any help from a plumber! It is recommended to use waterproof tape during installation. Equipped with abS aerator to stabilize water pressure and provide straight water flow. 2 handle operation with two valve control devices, it is easy to operate with one hand. Reminder: Please close both handles after use. The smooth stainless steel surface remains as new even in the hot stove top environment for a long time, ensuring durability and easy cleaning.

The 360 rotating design can fill large cooking containers easily and quickly, and easily solves the trouble of walking from the sink to the stove. 360°rotation the pot filler can extend up to 21. 7 inches 550 mm and is suitable for stoves with multiple burners. We provide you with 100% satisfactory service. Please feel free to contact us for any questions about the faucet.
BrandAwinner #ad
ManufacturerAwinner #ad

10. Heyalan


Heyalan Pot Filler Brushed Nickel Wall Mounted Folding Stretchable Kitchen Restaurant Sink Faucet with Double Joint Swing Arm Single Hole Two Handles Commercial NPT Stainless Steel

Heyalan #ad - American standard design: 2. 2 gpm 60 psi, 15 l/min 414 kpa, fit for us standard, fill the large pots or pans quickly; NPT 1/2" connecting thread, with a installation flange for stability. Design and workmanship: dual handles pot filler with two ceramic valves provide smooth turning action and prevent dripping; the surface of the matte plating layer has anti-scratch and anti-corrosion properties and is not easy to oxidize.

Convenience and easy use: faucet maximum extension length is 20 inches, one hole Inlet Wall Mount, and spout maximum water supply radius is 19 inches. Premium material: the core material of this pot filler kitchen faucet is industrial-grade Stainless Steel, which increases the durability and reliability of the structure. The brushed nickel finish will undoubtedly complement the modern look of your kitchen and is easy to clean.

Equipped with exquisite aerator, it can provide stable pressure and straight constant water flow. Use for only cold water or only hot Water, dual swing joints that can rotate 360 degrees, dual valve control has greater flexibility when used. Perfect for filling pots: wall-mounted pot fillers are the perfect addition to any kitchen with the convenience of filling large pots directly on the stovetop.
BrandHeyalan #ad
ManufacturerAn Tai #ad
Weight1.67 Pounds