Top 10 PSA Lapping Film – Power Sander PSA Discs

As an Amazon Associate I earn from qualifying purchases.

1. 3M (TM)

#ad

3M TM 7 Sheet 4-1/4 inch x 11 inch PSA Lapping Microfinishing Film For Scary Sharp Sharpening System Aluminum Oxide AO

#ad
3M (TM) #ad - 100% made in the USA. 7 sheet bundle containing the following micron sizes. 3, 12, 1, 9, 3, 30 and 40. Sizes: 4-1/4" x 11". Pressure sensitive Adhesive PSA with 3 mil high-strength polyester film backing. Aluminum Oxide AO abrasive material.
Brand3M (TM) #ad
Manufacturer3M (TM) #ad
Part Number279175
Model279175

2. Taytools

#ad

7 Sheet Variety Pack PSA Pressure Sensitive Adhesive .3, 30 and 40 microns Lapping Microfinishing Film Aluminum Oxide AO 8-1/2 x 11 Inches, 3, 12, 9, 1

#ad
Taytools #ad - 7 sheet bundle containing the following micron sizes. 3, 1, 12, 5, 3, 30 and 40.100% made in the USA. Aluminum Oxide AO abrasive material. 3 mil high-strength polyester film backing. Pressure sensitive Adhesive PSA.
BrandTaytools #ad
ManufacturerTaytools #ad
Part Number465449
Model465449

3. Taytools

#ad

5 Sheet Bundle 3 Micron 8,000 Grit PSA Lapping Microfinishing Film Aluminum Oxide AO 8 1/2” x 11” 266Xx5

#ad
Taytools #ad - Psa pressure sensitive adhesive backing. Five sheets 3 micron 8. 000 grit lapping film 8. 5" x 11". Aluminum Oxide AO abrasive material. 3 mil high-strength polyester film backing. Pinkcolor.
BrandTaytools #ad
ManufacturerTaytools #ad
Part Number266Xx5

4. Taytools

#ad

10 Piece Set Lapping Microfinishing Polishing Film 0.05 Micron 500,000 Grit to 60 Micron 250 Grit 8.5 inches x 11 inches Non- Pressure Sensitive Adhesive 3 Mil Backing

#ad
Taytools #ad - Available in a wide range of precise micron grades from 005 micron 500, 000 grit to 60 micron 250 grit to meet any sharpening or polishing need. Can also be used to put a fine polish on jewelry or gemstones.

They can be used to put a wicked sharp edge on wood chisels, plane irons, carving tools or knives. 10 piece set lapping microfinishing polishing film with the following grades: : 005 micron off-white or 500, 30 micron green or 600 grit, 3 micron pink or 8, 1 micron light green or 14, 000 grit, 9 micron light blue or 1800 grit, 000 grit, 12 micron yellow or 1200 grit, 000 grit, 000 grit, 5 micron brown or 4500 grit, 0.33

3 micron white or 60, 40 micron blue or 300 and 60 micron ivory or 250 grit. 8. 5 inches x 11 inches Non-PSA Pressure Sensitive Adhesive backing. Aluminum oxide ao abrasive material self-fractures in use to expose fresh cutting edges. 3 mil high-strength water-resistent polymer film backing is less likely to tear than traditional wet or dry sandpaper.
BrandTaytools #ad
ManufacturerTaytools #ad
Part NumberNONPSA-3M-9PIECE
Model.

5. Taytools

#ad

5 Sheet Bundle 9 Micron 1800 Grit PSA Lapping Microfinishing Film Aluminum Oxide AO 8 1/2” x 11” 266Xx5

#ad
Taytools #ad - Aluminum Oxide AO abrasive material. 3 mil high-strength polyester film backing. Psa pressure sensitive adhesive backing. Five sheets 9 micron 1800 grit lapping film 8. 5" x 11". Light blue color.
BrandTaytools #ad
ManufacturerTaytools #ad
Part Number266X9micx5

6. 3M (TM)

#ad

3M TM Diamond Lapping Microfinishing Film 3 inches x 8 Inches PSA Pressure Sensitive Adhesive Backing 125 micron / 120 grit

#ad
3M (TM) #ad - This aggressive polishing abrasive will cut up to twice as fast and last up to twice as long as aluminum oxide AO or silicon carbide SC films. This super-fast cutting, but excel when used on harder materials such as hardened steel, close tolerance finishes, long-lasting, consistent, water resistant abrasive provides precise, carbide or gemstones.

They are available in a wide range of precise micron grades from. 1 micron 100, 000 grit to 125 micron 120 grit to meet any sharpening or polishing need. The high-strength polyester film backing is less likely to tear than traditional wet or dry sandpaper.

These diamond sheets contain carefully graded monocrystalline diamond particles electrostatically coated onto a high strength polyester film backing. These are psa pressure sensitive adhesive backed. Grades from. 1 to 30 micron have a 3 mil backing and grades 45 to 125 have a much thicker 5 mil backing.
Brand3M (TM) #ad
Manufacturer3M (TM) #ad

7. Taytools

#ad

One Sheet 3 Micron 8,000 Grit PSA Lapping Microfinishing Film Aluminum Oxide AO 8 1/2” x 11” 266Xx1

#ad
Taytools #ad - One sheet 3 micron 8. 000 grit lapping film 8. 5" x 11". 3 mil high-strength polyester film backing. Psa pressure sensitive adhesive backing. Pinkcolor. Aluminum Oxide AO abrasive material.
BrandTaytools #ad
ManufacturerTaytools #ad
Part Number266Xx1

8. Taytools

#ad

One Sheet 1 Micron 14,000 Grit PSA Lapping Microfinishing Film Aluminum Oxide AO 8 1/2” x 11” 265Xx1

#ad
Taytools #ad - Psa pressure sensitive adhesive backing. Light green color. One sheet 1 micron 14. 000 grit lapping film 8. 5" x 11". Aluminum Oxide AO abrasive material. 3 mil high-strength polyester film backing.
BrandTaytools #ad
ManufacturerTaytools #ad
Part Number265Xx1

9. Taytools

#ad

Taytools 279205 Three Sheets 5/16 x 5 x 12 Deal Flat Float Plate Glass with 7 Sheets 3M TM Lapping Microfinishing Film 4-1/4 x 11 for Scary Sharp Sharpening System

#ad
Taytools #ad - Lapping film has pressure sensitive Adhesive PSA backing with 3 mil high-strength polyester film backing to minimize tearing. Float glass will accommodate a half sheet of lapping film. This set contains three sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes. 3. The scary sharp sharpening method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective. 1, 3, 5, 12, 30 and 40.5/16 float glass is dead flat and the perfect substrate to attach abrasive sheets.
BrandTaytools #ad
ManufacturerTaylor Toolworks #ad
Part Number279205
Model279205

10. Taytools

#ad

3m TM Lapping Microfinishing Polishing Film 8.5 inches x 11 inches Aluminim Oxide AO Pressure Sensitive Adhesive PSA Backing 3 Mil Film Polymer Backing 3, 100 Micron / 120 Grit

#ad
Taytools #ad - Strong 3 mil film backing enhances abrasive durability and offers greater tear-resistance than comparable paper products, making it ideal for high-production environments.

8. 5 inch x 11 inch sheets may be easily cut and shaped per project requirements. Can be used wet or dry. Pressure sensitive adhesive PSA backing allows quick, flat attachment and clean removal for multi-step finishing processes. Precision, micron-graded aluminum oxide ao abrasive offers a fast cut rate and a superior, e-coat, uniform finish on many substrates and is ideal for sanding plastics, paint, wood, composites and metal.
BrandTaytools #ad
Manufacturer3M (TM) #ad