Top 10 PSA Lapping Microfinishing Film – Power Sander PSA Discs

As an Amazon Associate I earn from qualifying purchases.

1. 3M (TM)

#ad

3M TM 7 Sheet 4-1/4 inch x 11 inch PSA Lapping Microfinishing Film For Scary Sharp Sharpening System Aluminum Oxide AO

#ad
3M (TM) #ad - Aluminum Oxide AO abrasive material. 100% made in the USA. 7 sheet bundle containing the following micron sizes. 3, 9, 12, 3, 1, 30 and 40. Sizes: 4-1/4" x 11". Pressure sensitive Adhesive PSA with 3 mil high-strength polyester film backing.
Brand3M (TM) #ad
Manufacturer3M (TM) #ad
Part Number279175
Model279175

2. Taytools

#ad

10 Piece Set Lapping Microfinishing Polishing Film 0.05 Micron 500,000 Grit to 60 Micron 250 Grit 8.5 inches x 11 inches Non- Pressure Sensitive Adhesive 3 Mil Backing

#ad
Taytools #ad - Can also be used to put a fine polish on jewelry or gemstones. Available in a wide range of precise micron grades from 005 micron 500, 000 grit to 60 micron 250 grit to meet any sharpening or polishing need.

Aluminum oxide ao abrasive material self-fractures in use to expose fresh cutting edges. 8. 5 inches x 11 inches Non-PSA Pressure Sensitive Adhesive backing. 10 piece set lapping microfinishing polishing film with the following grades: : 005 micron off-white or 500, 9 micron light blue or 1800 grit, 000 grit, 0.33 micron white or 60, 000 grit, 5 micron brown or 4500 grit, 3 micron pink or 8, 1 micron light green or 14, 12 micron yellow or 1200 grit, 000 grit, 30 micron green or 600 grit, 000 grit, 40 micron blue or 300 and 60 micron ivory or 250 grit.

They can be used to put a wicked sharp edge on wood chisels, plane irons, carving tools or knives. 3 mil high-strength water-resistent polymer film backing is less likely to tear than traditional wet or dry sandpaper.
BrandTaytools #ad
ManufacturerTaytools #ad
Part NumberNONPSA-3M-9PIECE
Model.

3. Taytools

#ad

3, 1, 12, 7 Sheet Variety Pack PSA Pressure Sensitive Adhesive .3, 30 and 40 microns Lapping Microfinishing Film Aluminum Oxide AO 8-1/2 x 11 Inches, 9

#ad
Taytools #ad - 100% made in the USA. Aluminum Oxide AO abrasive material. 3 mil high-strength polyester film backing. 7 sheet bundle containing the following micron sizes. 3, 3, 5, 1, 12, 30 and 40. Pressure sensitive Adhesive PSA.
BrandTaytools #ad
ManufacturerTaytools #ad
Part Number465449
Model465449

4. Taytools

#ad

Taytool 279182 Single Sheet 5/16 x 5 x 12 Dead Flat Float Plate Glass with 7 Sheets 3M TM Lapping Microfinishing Film for Scary Sharp Sharpening System

#ad
Taytools #ad - 1, 12, 5, 3, 30 and 40. This set contains a single sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes. 3. Float glass will accommodate a half sheet of lapping film. The scary sharp sharpening method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective. Lapping film has pressure sensitive Adhesive PSA backing with 3 mil high-strength polyester film backing to minimize tearing. 5/16 float glass is dead flat and the perfect substrate to attach abrasive sheets.
BrandTaytools #ad
ManufacturerTaytools #ad
Part Number279182
Model279182

5. Taytools

#ad

5 Sheet Bundle 12 Micron 1200 Grit PSA Lapping Microfinishing Film Aluminum Oxide AO 8 1/2” x 11” 266Xx5

#ad
Taytools #ad - Aluminum Oxide AO abrasive material. 3 mil high-strength polyester film backing. Psa pressure sensitive adhesive backing. Yellow color. Five sheets 12 micron 1200 grit lapping film 8. 5" x 11".
BrandTaytools #ad
ManufacturerTaytools #ad
Part Number266X12micx5

6. 3M (TM)

#ad

3M TM Diamond Lapping Microfinishing Film 3 inches x 8 Inches PSA Pressure Sensitive Adhesive Backing 125 micron / 120 grit

#ad
3M (TM) #ad - These are psa pressure sensitive adhesive backed. These diamond sheets contain carefully graded monocrystalline diamond particles electrostatically coated onto a high strength polyester film backing.

This super-fast cutting, long-lasting, close tolerance finishes, but excel when used on harder materials such as hardened steel, consistent, water resistant abrasive provides precise, carbide or gemstones. This aggressive polishing abrasive will cut up to twice as fast and last up to twice as long as aluminum oxide AO or silicon carbide SC films.

They are available in a wide range of precise micron grades from. 1 micron 100, 000 grit to 125 micron 120 grit to meet any sharpening or polishing need. The high-strength polyester film backing is less likely to tear than traditional wet or dry sandpaper. Grades from. 1 to 30 micron have a 3 mil backing and grades 45 to 125 have a much thicker 5 mil backing.
Brand3M (TM) #ad
Manufacturer3M (TM) #ad

7. Taytools

#ad

60 Micron / 300 Grit, 3m TM Lapping Microfinishing Polishing Film 8.5 inches x 11 inches Aluminim Oxide AO Pressure Sensitive Adhesive PSA Backing 3 Mil Film Polymer Backing 5

#ad
Taytools #ad - 8. 5 inch x 11 inch sheets may be easily cut and shaped per project requirements. Precision, micron-graded aluminum oxide ao abrasive offers a fast cut rate and a superior, e-coat, wood, uniform finish on many substrates and is ideal for sanding plastics, paint, composites and metal.

Pressure sensitive adhesive PSA backing allows quick, flat attachment and clean removal for multi-step finishing processes. Can be used wet or dry. Strong 3 mil film backing enhances abrasive durability and offers greater tear-resistance than comparable paper products, making it ideal for high-production environments.
BrandTaytools #ad
Manufacturer3M (TM) #ad

8. Taytools

#ad

5 Sheet Bundle 3 Micron 8,000 Grit PSA Lapping Microfinishing Film Aluminum Oxide AO 8 1/2” x 11” 266Xx5

#ad
Taytools #ad - Aluminum Oxide AO abrasive material. Pinkcolor. Psa pressure sensitive adhesive backing. 3 mil high-strength polyester film backing. Five sheets 3 micron 8. 000 grit lapping film 8. 5" x 11".
BrandTaytools #ad
ManufacturerTaytools #ad
Part Number266Xx5

9. Taytools

#ad

5 Sheet Bundle 9 Micron 1800 Grit PSA Lapping Microfinishing Film Aluminum Oxide AO 8 1/2” x 11” 266Xx5

#ad
Taytools #ad - Aluminum Oxide AO abrasive material. 3 mil high-strength polyester film backing. Five sheets 9 micron 1800 grit lapping film 8. 5" x 11". Psa pressure sensitive adhesive backing. Light blue color.
BrandTaytools #ad
ManufacturerTaytools #ad
Part Number266X9micx5

10. Taytools

#ad

One Sheet 1 Micron 14,000 Grit PSA Lapping Microfinishing Film Aluminum Oxide AO 8 1/2” x 11” 265Xx1

#ad
Taytools #ad - Aluminum Oxide AO abrasive material. Psa pressure sensitive adhesive backing. One sheet 1 micron 14. 000 grit lapping film 8. 5" x 11". 3 mil high-strength polyester film backing. Light green color.
BrandTaytools #ad
ManufacturerTaytools #ad
Part Number265Xx1