As an Amazon Associate I earn from qualifying purchases.
Poweka #ad - Perfect design :pull bar used for laminate, tongue-and-groove, vinyl plank, wood flooring and hardwood flooring installation. Upgrade size：12. 2 inch /310mm long, 4mm thick upgraded pull bar is more longger and thicker than the normal design.
The normal design are usually only 3 mm thick, 105 inch long and easily deformed. Good fuction:this flooring installation pull bar tool allows you to work in tight spaces or close to the wall, closing the gaps and seams in laminate floors without causing damage – Perfect alternative to tapping blocks.
Poweka #ad - Non-marring: features a pair of soft, non-abrasive felt backing pads on both ends to protect the finish of the floor at the time of install. Built with a thick 079in, premium steel construction and possesses an attractive powder coating protective finish.
Perfect design :pull bar used for laminate, tongue-and-groove, vinyl plank, wood flooring and hardwood flooring installation. Package includes: 1*flooring Installation Pull Bar 104 in /265mm long.
WorkPro #ad - You are always welcomed to contact us for warranty service whenever there is any problem with the product. The handle is made of American hickory which is lightweight but tough. The approximate size of the block is 7-7/8 x 2-1/2 x 3/4 inch.
The double-faced solid PVC head delivers a softened, positive strike. The pull bar is 12-1/4 inch long and 1-1/8 inch thick, which is superior to the normal design. Reinforced mallet: constructed of cast iron with bright chrome plating, the hammer is equipped with the hardness of 90±5 HAS.
The approximate size of the spacer 2-3/8 x 1-1/8 inch. 30-piece spacers: the kit comes with 30 pieces plastic spacers which are designed with non-slip slots. The kit is perfect for domestic and professional use for laminate or hardwood flooring with guaranteed quality. The whole mallet is 10-3/4 inch long and weighs 1. 036lb. The soft pads on the back can well protect the floor from scratch.
swiftrans #ad - Mallet head is 35 mm in diameter, handle length is 255mm. Pull bar is 4mm thick and 12 inch length, suitable for 027in 7mm - 06in 15mm laminate or hardwood flooring. 40 piece spacers can stack and stagger the spacers to create different thicknesses.
They are tapered, following the instructions, just put two together and adjust to any width, a helpful kit for a faster and efficient laminate floor install. The end piece upgraded pull bar has two felt pads on the bottom side that sits on the flooring to help prevent scratches, works great when reaching the end of the row to seat all the floor boards into each other tightly.
Including all the installation kit you need to help your lay down laminate flooring or vinyl plank flooring. Rubber hammer included is great for tapping down the end seams for a perfect lock. There is a groove in the block that fits the tongue perfectly and is much faster than locking and unlocking a scrap piece of flooring. Just slip the shorter edge against the wall on either side and hammer it from both sides to ensure they are connected.
MOONWELL #ad - Used to pull planks together of tongue and groove. The short end is thinner than usual pull bars to fit tight spaces against a wall. For use with a mallet. Pro pull bar for vinyl plank, laminate and hardwood flooring installation. Made of manganese steel that is tough and durable.
REXBETI #ad - 1x upgraded tapping block, 1x pull bar, 1x double headed mallet, 30x spacers. An ideal tool to install your laminate wood flooring faster. Complete tool kit contains all the essentials you need, making your installation more convenient and easier.
JAPCHET #ad - Double-headed mallet - the rubber hammer head is firmly attached to the handle to ensure that it does not break off at the head or the handle falls off. A 12 oz rubber hammer measures 12 inches long and has a 2-inch diameter head.
An ideal choice for home and professional use. This laminate wood flooring installation kit makes your installation more convenient and easier. Wide applications - these laminate wood flooring installation tool allows you to work in tight place or close to the wall.
Sturdy structure - the pull bar is made of high quality A3 steel for high strength and corrosion resistance. We guarantee to offer a 30-day refund. Hassle-free purchase - we provide all customers with higher quality products and satisfactory shopping experience. The felt pad on the back helps prevent damage and scratching to the board during installation. It is suitable for 0
CARIB GEAR PRO #ad - This set may be used for installing laminate, vinyl, hardwood, or tile floors. If you're not happy with this set, let us know within 1 year of purchase so we can issue a refund. Each one shows off solid construction, giving you peace of mind that they can withstand heavy duty use.
Everything you need mallet upgraded august 2022 - be prepared for any DIY floor installation tasks with this kit. Built to last - you can expect all these flooring tools to stay in perfect shape for many years.
Install most kinds of flooring - this laminate flooring installation kit is a must-have for DIY or professional use. Duplicate odd angles - copy odd-shaped angles and edges like a pro. Customer satisfaction - this floor installation kit is backed by a Limited Lifetime Warranty. It comes with a rubber mallet, 40 spacers, a 12" pull bar, a solid tapping block, and a 10" contour gauge.
Motcoda #ad - Floor tols this floor installation kit includes: a reinforced vinyl floor puller, a flooring block tapping, vinyl floor, laminate flooring kit, hardwood floor, 40 flooring install spacers, vinyl flooring tools, to meet 0.27in 7mm-06in 15mm composite floor, a double-sided rubber solid hammer 2 spare hammer faces, which is a laminate flooring installation kit set, solid wood floor installation.
Upgrade the floor pull bar this pull bar for laminate flooring is forged from high-quality steel. Solid self-tapping block this hardwood floor tapping block is made of sturdy polypropylene material, size: 079"x6.
It is a high-quality laminate shims. Thick, it weighs 1. 18 pounds, the floor installation surface has 3 soft pads to protect the floor, is 02" thick, preventing scratches and damage to the floor, the surface is thickly coated with rust-proof matte paint, it is an excellent laminate kit. Rubber mallet set this is a floor hammer with detachable and replaceable hammer heads 2 spare hammer surfaces, wood floor hammer rubber that allows you to continue working in an emergency, hammer diameter : 1.
KOHAND #ad - For any reason, if the pull bar for laminate plank is not as good as you expected, you can get a refund within 30 days. It is usually suitable for installation of laminate, vinyl board, tongue and groove, wood flooring and hardwood flooring.
Easy to use - the flooring installation pull bar can pull the plank and the tongue and groove together to install your new composite floor or hardwood floor quickly, efficiently and accurately. Multi-function - the 12 inch pull bar allows you to work in small spaces or close to walls, closing the gaps and joints of laminate flooring without causing damage.
There are 3 soft round pads on the back to protect the floor from scratches. With the black matte coating, it keeps away the damage of rust and corrosion. It is 12 inches long and 016 inches thick. It is an ideal tool for anyone engaged in flooring projects. Thickened design - the pull bar for vinyl plank flooring is designed to be longer and thicker than other ordinary pull back hooks.
1. Poweka
#adHeavy Duty Pull bar for Vinyl Plank Flooring and Laminate Wood Flooring Installation Tool,12.2 inch Long
#adThe normal design are usually only 3 mm thick, 105 inch long and easily deformed. Good fuction:this flooring installation pull bar tool allows you to work in tight spaces or close to the wall, closing the gaps and seams in laminate floors without causing damage – Perfect alternative to tapping blocks.
More information #ad
Enhanced pull bar：made from premium a3 steel with matt coating, the pull bar designed with enhanced strength and corrosion resistance. The soft pads on the back can well protect the floor from scratch. Fit for：suitable for 027in 7mm - 06in 15mm laminate or hardwood flooring.| Brand | Poweka #ad |
| Manufacturer | Poweka #ad |
More information #ad
2. Poweka
#adVinyl Plank Flooring and Wood Flooring Installation Tool（10.4in 10.4inch, 265mm Pull Bar for Laminate Plank, 1
#adPerfect design :pull bar used for laminate, tongue-and-groove, vinyl plank, wood flooring and hardwood flooring installation. Package includes: 1*flooring Installation Pull Bar 104 in /265mm long.
More information #ad
Specs: the pair of precision formed lips are measured at 039in high to fit between the wall or end of the board and 09in high to strike with a mallet. Fuction:this flooring installation pull bar tool allows you to work in tight spaces or close to the wall, closing the gaps and seams in laminate floors without causing damage – Perfect alternative to tapping blocks.| Brand | Poweka #ad |
| Manufacturer | Poweka #ad |
| Part Number | pk |
More information #ad
3. WorkPro
#adHeavy Duty Pull Bar, WORKPRO Laminate Wood Flooring Installation Kit with Reinforced Double-Faced Mallet, Tapping Block and 30-Piece Spacers Included
#adThe double-faced solid PVC head delivers a softened, positive strike. The pull bar is 12-1/4 inch long and 1-1/8 inch thick, which is superior to the normal design. Reinforced mallet: constructed of cast iron with bright chrome plating, the hammer is equipped with the hardness of 90±5 HAS.
More information #ad
Enhanced pull bar: made from premium a3 steel with matt coating, the pull bar designed with enhanced strength and corrosion resistance. Solid tapping block: the tapping block made from polypropylene is designed solid, which is more sturdy and durable. The approximate size of the spacer 2-3/8 x 1-1/8 inch. 30-piece spacers: the kit comes with 30 pieces plastic spacers which are designed with non-slip slots. The kit is perfect for domestic and professional use for laminate or hardwood flooring with guaranteed quality. The whole mallet is 10-3/4 inch long and weighs 1. 036lb. The soft pads on the back can well protect the floor from scratch.
| Brand | WorkPro #ad |
| Manufacturer | HANZGHOU GREATSTAR INDUSTRIAL CO.LTD #ad |
More information #ad
4. swiftrans
#adWood Flooring Installation Kit 43 Pcs Laminate Vinyl Plank Flooring Assembly Tool with Spacers, Tapping Block,Heavy Duty Pull Bar,High-Strength Fiberglass Handle Mallet
#adThey are tapered, following the instructions, just put two together and adjust to any width, a helpful kit for a faster and efficient laminate floor install. The end piece upgraded pull bar has two felt pads on the bottom side that sits on the flooring to help prevent scratches, works great when reaching the end of the row to seat all the floor boards into each other tightly.
More information #ad
Package includes 1 x rubber hammer, 1 x tapping block, 1 x pull bar, 40 x spacers, total 43 Pcs. Including all the installation kit you need to help your lay down laminate flooring or vinyl plank flooring. Rubber hammer included is great for tapping down the end seams for a perfect lock. There is a groove in the block that fits the tongue perfectly and is much faster than locking and unlocking a scrap piece of flooring. Just slip the shorter edge against the wall on either side and hammer it from both sides to ensure they are connected.
| Brand | swiftrans #ad |
| Manufacturer | swiftrans #ad |
More information #ad
5. MOONWELL
#adMOONWELL Pull Bar for Laminate Plank and Wood Flooring Installation 13 inch
#adMore information #ad
| Brand | MOONWELL #ad |
| Manufacturer | MOONWELL #ad |
| Height | 1.38 Inches |
| Length | 12.99 Inches |
| Width | 1.97 Inches |
| Part Number | TH008 |
More information #ad
6. REXBETI
#adUpgraded Tapping Block, REXBETI Laminate Wood Flooring Installation Kit with 30 Spacers, Pull Bar and Mallet
#adMore information #ad
Upgraded tapping block to install countless flooring. Suitable for 7-15mm028-059" laminate/hardwood flooring.| Brand | REXBETI #ad |
| Manufacturer | REXBETI #ad |
| Part Number | REX88776 |
| Model | EN-CFG |
More information #ad
7. JAPCHET
#ad12 Inches Pull Bar with 12 oz Double-Headed Rubber Mallet for Vinyl Plank Flooring, JAPCHET Laminate Wood Flooring Installation Kit with Fiberglass Handle Mallet
#adAn ideal choice for home and professional use. This laminate wood flooring installation kit makes your installation more convenient and easier. Wide applications - these laminate wood flooring installation tool allows you to work in tight place or close to the wall.
More information #ad
Laminate flooring tool - the kit includes a pull bar measuring 12 inches in length and 016 inch in thickness. It will not be deformed by knocking. Double-sided sturdy cushioned rubber head provides a non-damaging but effective blow. Sturdy structure - the pull bar is made of high quality A3 steel for high strength and corrosion resistance. We guarantee to offer a 30-day refund. Hassle-free purchase - we provide all customers with higher quality products and satisfactory shopping experience. The felt pad on the back helps prevent damage and scratching to the board during installation. It is suitable for 0
| Brand | JAPCHET #ad |
| Manufacturer | JAPCHET #ad |
| Part Number | 1 |
More information #ad
8. CARIB GEAR PRO
#adLaminate Wood Flooring Installation Kit with Extra Strong Solid Tapping Block Heavy Duty Pull Bar Non Slip Soft Grip Double Faced Mallet 40 Spacers Included and 10 inch Duplicator Gauge with Lock
#adEverything you need mallet upgraded august 2022 - be prepared for any DIY floor installation tasks with this kit. Built to last - you can expect all these flooring tools to stay in perfect shape for many years.
More information #ad
The 10-inch duplicator gauge with lock is perfect for making accurate copies of curved corners, round edges, and tight trim angles. Install most kinds of flooring - this laminate flooring installation kit is a must-have for DIY or professional use. Duplicate odd angles - copy odd-shaped angles and edges like a pro. Customer satisfaction - this floor installation kit is backed by a Limited Lifetime Warranty. It comes with a rubber mallet, 40 spacers, a 12" pull bar, a solid tapping block, and a 10" contour gauge.
| Brand | CARIB GEAR PRO #ad |
| Manufacturer | CARIB GEAR PRO #ad |
| Part Number | CLWFIK-120219 |
More information #ad
9. Motcoda
#adMotcoda Laminate Wood Flooring Installation Kit Hardwood Floor Vinyl Floor Plank Install Tools Reinforced Double-Faced Mallet Heavy Duty Pull Bar Rubber Tapping Block and 40 pcs
#adUpgrade the floor pull bar this pull bar for laminate flooring is forged from high-quality steel. Solid self-tapping block this hardwood floor tapping block is made of sturdy polypropylene material, size: 079"x6.
More information #ad
9"x2. 6", made of solid, weight: 05 pounds, more durable than hollow self-tapping block, it is a high-quality lvp block, Can withstand the strong impact of flooring mallet hammer, use a variety of floor installations, vinyl flooring tapping block. It is a high-quality laminate shims. Thick, it weighs 1. 18 pounds, the floor installation surface has 3 soft pads to protect the floor, is 02" thick, preventing scratches and damage to the floor, the surface is thickly coated with rust-proof matte paint, it is an excellent laminate kit. Rubber mallet set this is a floor hammer with detachable and replaceable hammer heads 2 spare hammer surfaces, wood floor hammer rubber that allows you to continue working in an emergency, hammer diameter : 1.
| Brand | Motcoda #ad |
| Manufacturer | N\C #ad |
| Part Number | LWFIK-21-116 |
More information #ad
10. KOHAND
#adHeavy Duty Pull Bar for Laminate Plank, Vinyl Plank and Wood Flooring Installation, KOHAND 2 Pack 12 Inch Black Pull Bar
#adEasy to use - the flooring installation pull bar can pull the plank and the tongue and groove together to install your new composite floor or hardwood floor quickly, efficiently and accurately. Multi-function - the 12 inch pull bar allows you to work in small spaces or close to walls, closing the gaps and joints of laminate flooring without causing damage.
More information #ad
About returns - if you're hesitant to place an order because of concerns about returns, there is no need at all. Well made - the pull bar is made of high-quality a3 steel, which is sturdy and durable. There are 3 soft round pads on the back to protect the floor from scratches. With the black matte coating, it keeps away the damage of rust and corrosion. It is 12 inches long and 016 inches thick. It is an ideal tool for anyone engaged in flooring projects. Thickened design - the pull bar for vinyl plank flooring is designed to be longer and thicker than other ordinary pull back hooks.
| Brand | KOHAND #ad |
| Manufacturer | KOHAND #ad |
| Part Number | KOHAND |
More information #ad
