As an Amazon Associate I earn from qualifying purchases.
1. DEWALT #ad
12-Inch DWS779, DEWALT Sliding Compound Miter Saw #adDEWALT #ad
- Super-efficient dust collection system captures over 75 percent of dust generated. 3800 rpm motor. Other specifications: 15 amps, 12” blade diameter, 5/8” or 1” Arbor size.
Tool weight: 56 pounds; Maximum cutting thickness: 6. 75 inch. Exclusive back fence design cuts up to 2x14 dimensional lumber at 90 degree and 2x12 at 45 degree.
Type of milter saw: Slide. Backed by dewalt's 3 year limited warranty. Tool dimensions: 17” h x 24. 75” l. Your purchase includes: 1 cdewalt dws779 sliding compound cord miter saw, 12-inch, carbide blade, 1 blade wrench. Miter saw does not come with LED sold separately or laser cutting guide.
|Warranty||3 year limited warranty|
2. Skil #ad
Skil 10" Dual Bevel Sliding Miter Saw, MS6305-00 #adSkil #ad
- 2x12 cutting capacity – cross cuts lumber up to 2x12 at 90 degrees, and 2x8 lumber at 45 degrees. Led shadow line - Provides high precision cuts with greater accuracy than lasers. Powerful 15 amp motor - delivers 4, 800 RPM for quick, detailed cuts.
Dual bevel – perform cuts in four positive stop positions at 48° & 45° left, 0°, and 45° right. Cuts at common angles - cuts up to 50 degrees left and right with 11 positive stops at most used angles.
|Warranty||3 Year limited warranty|
3. WEN #ad
WEN MM1011 15-Amp 10" Single Bevel Compact Sliding Compound Miter Saw with Laser #adWEN #ad
- Onboard class II laser guide illuminates your line of cut. Miter 45 degrees in either direction featuring 9 miter stops or bevel 45 degrees to the left. Includes a 10-inch 40-tooth carbide-tipped blade, a dust port adapter, Two table extensions, a dust bag, one clamp assembly, and a two-year warranty.
Powerful 15-amp motor cuts boards up to 12 inches wide and 3-1/2 inches thick. Features a 7-1/2-inch crown molding nested capacity and a 6-3/4-inch base board vertical capacity.
4. Delta #ad
Delta Power Equipment Corporation S26-263L Shopmaster 10 In. Slide Miter Saw w/Laser 2018 #adDelta #ad
- Bevels left - from 0°- 45°, cuts Nominal 2X12 at full bevel. Improved laser – with on/off switch. Lightweight unit is easy to move from room to room or even from job to job.
Spindle lock holds spindle securely while bade nut is loosened and removed. Table extensions help support long work pieces. Makes aligning blade to work piece more convenient and precise cuts.
5. Delta #ad
Delta Shopmaster S26-272L 12 Inch sliding compound miter saw #adDelta #ad
- 0 to 45 left and 0 to 50 right miter angle capacities. Lightweight unit is easy to move from room to room or even from job to job. 5 in. Up to 13. Miter stop at most used Crown molding angles. Cross cut capacity at 90°. Electric brake stops the blade within seconds of releasing switch.
6. TACKLIFE #ad
EMS01A, Extension Table, TACKLIFE 10-Inch Sliding Miter Saw, 0°-45° Bevel Cut, Red Laser, Compound Miter Saw, 3 Blades40T&48T, Double Speed 4500 RPM & 3200 RPM, 15 Amp, Dust Bag #adTACKLIFE #ad
- Double safety Switch protects you from any incidental injuries. 3*blades & extension table- tacklife miter saw is equipped with two 10" 40t TCT blades for wood and plastic, and one multifunctional 10" 48T TCT blade for versatile use. Iron guard & double safety switch-tacklife miter saw is designed with iron Guard, which is able to withstand the daily rigors that come with working on a job site.
Miter cutting & bevel cutting-tacklife miter saw supplies 0° to 45° range for miter cutting. Powerful 15-amp motor gives more power and durability.
Dust collection system cuts down the number of dust particles that remain after a cut, making your cleaning much easier. Laser guide& dust vacuum port- tacklife miter saw offers laser to make precise adjustments to the left or right. Double speeds & powerful motor-tacklife miter saw provides two different speeds for various materials: 3200r/min for soft metal and plastic, 4500r/min for wood，giving your cutting more choices.
An extension table with vice clamping provides better support and balance, increasing the stability during cutting. The free bevel range from 0° to 45° allows you to do bevel cutting for more purposes. The angle of the miter table is -45°/ 0°/ + 45° and the positive angles in all these directions are 0°, 22. 5°, 30° and 45°, 15°, respectively.
|Part Number||Ideal gift for your family|
7. TACKLIFE #ad
Extension Table, TACKLIFE 10-Inch Sliding Miter Saw, Iron Blade Guard, EMS01A, Red Laser, 3 Blades, with Double Speed 4500 RPM & 3200 RPM, Bevel Cut 0°-45°, Compound Miter Saw, 15 Amp Motor #adTACKLIFE #ad
- Bevel cutting & laser guide: the free bevel range from 0° to 45° allows you to do bevel cutting for more purposes. The angle of the miter table is -45°/ 0°/ + 45° and the positive angles in all these directions are 0°, 22. 5°, 15°, 30° and 45°, respectively. The laser is attached to accurately track real-time position and allows you to perform precise cutting.
An extension table with vice clamping provides better support and balance, increasing the stability during cutting. Made of stainless steel castings, it provides you with a strong saw and is well suited to withstand the daily work of the work site. The sliding cut design allows you to cut longer planks.
Richer accessories provide a wide range of choice for your operation. Durable tool & iron blade guard: solid iron self-retracting saw shield is more durable than plastic and transparent saws, the teeth cover of the cutting blade can protect you from accidental mishaps.
A 35mm dust port allows you to connect your vacuum cleaner with an adapter to capture more dust. While the tacklife ems01a miter saw is equipped with 3 blades: two 10" 40t tct blades for wood and plastic, you can convert between the two speeds 3200 RPM or 4500 RPM effortlessly for more precise cutting, and one multifunctional 10" 48T TCT blade for versatile use. 2 adjustable speed & 3 blades: by pressing the switch, high speed for wood while low speed for metal. Dust-free environment & extension table: an additional chip bag connects directly to the saw to help collect sawdust away from the workpiece during cutting.
8. DEWALT #ad
Compound, Double Bevel, 15-Amp DWS716XPS, XPS Cutline, 12-Inch, DEWALT Miter Saw #adDEWALT #ad
- Miter detent plate improves productivity and ensures cutting accuracy: Adjustable stainless steel miter detent plate with 14 positive stops. High visibility bevel scale that makes bevel adjustments fast and easy; 0-50 degrees left and right miter capacity for greater versatility.
Integrated xps cut line positioning system with LED light provides adjustment free cut line indication. Easier bevel cuts: tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
Double bevel design: double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 45, 33. 9, and 48 degrees both left and right allowing user to flip the saw not the material. Lightweight & portable: Lightweight design, head lock-down pin, and built-in carry handle for portability.
Cross cut capacity up to 2x8-inch dimensional lumber at 90° and a 2x6-Inch dimensional lumber at 45°. Optimized cutting accuracy: innovative gearbox and belt-drive design increases vertical cutting capacity; Precise miter system and machined-base fence support optimized cutting accuracy. Power and durability: 15 amp, 3, 800 rpm motor. Miter dentent override that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
9. KBLT #ad
Kobalt Compact Sliding 7-1/4-in 10-Amp Single Bevel Sliding Laser Compound Miter Saw #adKBLT #ad
- Miter cuts up to 50 degrees left and right with 9 positive stops at the most used degrees. Large, die-cast aluminum base and table for increased work support.
Maximum crosscut up to 2 in x 8 in nominal at 90 degrees and 2 in x 6 in at 45, idea for molding and framing cuts. Bevel cutting up to 47 degrees to the left, positive stops at 0 and 45 degrees. Lightweight under 23 lbs for easy transport from storage to work location.
Powerful 100 amp ball bearing motor, delivers up to 5, 000 RPM for accurate cuts. Tool-less adjustable upfront mounted laser guide system projects accurate pre-cutting line for precise alignment. Dual slide rail system with linear bearings allows for smooth and accurate operation. Tall, die-cast aluminum fence gives support during setup and cutting.
|Manufacturer||KBLT Tools #ad|
10. Makita #ad
Makita LS1019L 10" Dual-Bevel Sliding Compound Miter Saw with Laser #adMakita #ad
- And the most compact design in its Class for easy jobsite portability. 10" slide miter saw with the crown molding cutting capacity 6-5/8" nested of a 12" miter saw. Unique 2-steel rail sliding system design offers single slide-glide operation; reducing saw's footprint and allowing operation flush against a wall.
Linear ball bearing system engineered to deliver "dead-on" accurate cuts. Less weight 57. 9 lbs. Innovative direct drive gearbox and guard system is engineered for increased vertical cutting capacity 5-1/4".