Top 10 Spiral Upcut Router Bit – Spiral Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. Whiteside Router Bits

#ad

Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

#ad
Whiteside Router Bits #ad - Industrial Quality. Whiteside router Bits are made with Premium Carbide. Precision ground for proper balance at high RPM.
BrandWhiteside Router Bits #ad
ManufacturerWhiteside #ad
Height5.5 Inches
Length2 Inches
Weight0.05 Pounds
Width3 Inches
Part NumberRU2100
ModelRU2100

2. SpeTool

#ad

1/2 Cutting Diameter Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving, SpeTool Upcut Spiral Router Bits Extra Long 4 inch with 1/2 Inch Shank

#ad
SpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet. The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp. Solid carbide up cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length. Industrial quality control to ensure best performance. Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSPLD1/4-1/4-U

3. Freud

#ad

Freud 3/8" Dia. Solid Carbide Up Spiral Bit with 1/2" Shank 75-106,Silver

#ad
Freud #ad - Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods. D 3/8", cutting length h 1-1/4", 2 flutes, 1/2" Shank. Overall dia. Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers.
BrandFreud #ad
ManufacturerFreud #ad
Height0.2 Inches
Length1.5 Inches
Weight0.15 Pounds
Width0.2 Inches
Part Number75-106
Model75-106

4. MLCS

#ad

3-Piece, MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set

#ad
MLCS #ad - Remove sawdust and wood chips from plunge cuts with upward shearing. 1/4-inch and 1/2-Inch shanks. Solid micro grain carbide cuts smooth and stays sharp. 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter. Perfect for deep mortises and cutting dadoes in a router table.
BrandMLCS #ad
ManufacturerMLCS #ad
Part Number200
Model200

5. SpeTool

#ad

1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving, SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter

#ad
SpeTool #ad - Spiral bits used for smoothly upcut groove and slots, Cycles and dados with clean edge and bottom, Plunge Mortises, better than straight bits. Industrial quality control to ensure best performance. The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/4-U

6. SpeTool

#ad

SpeTool Upcut Spiral Router Bits With 1/2 Inch Shank, 1/2 Cutting Diameter HRC55 Solid Carbide CNC End Mill For Wood mortises and cutting dadoes, Carving

#ad
SpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet. The cnc end mill for plywood, mDF, oak, and any hardwood working and Long service life for sharp. Industrial quality control to ensure best performance. Solid carbide up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length. Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/2-1/2-U

7. Whiteside Router Bits

#ad

Up Cut Solid Carbide 1/2-Inch Cutting Diameter and 2-Inch Cutting Length, Whiteside Router Bits RU5200T Three Flute with Spiral Bit

#ad
Whiteside Router Bits #ad - Whiteside router Bits are made with Premium Carbide. Precision ground for proper balance at high RPM. Industrial Quality.
BrandWhiteside Router Bits #ad
ManufacturerWhiteside #ad
Height6 Inches
Length3 Inches
Weight1 Pounds
Width4.5 Inches
Part NumberRU5200T
ModelRU5200T

8. CMT

#ad

1/4-Inch Diameter by 2-1/2-Inch Length, CMT 191.008.11 Solid Carbide Upcut Spiral Bit, 1/4-Inch Shank,Silver

#ad
CMT #ad - 1-inch cutting length, 2 Cutting Edges, Right-Hand Rotation. For use on machining centers, point to point machines, CNC routers. Also for use on hand-held routers equipped with chucks or adaptors. For cutting, sizing and routing wood products, copying, plastic & laminates. Premium quality solid Carbide, Excellent finish on the workpiece lower side Upward chip ejection.
BrandCMT #ad
ManufacturerCMT #ad
Height0.25 Inches
Length2 Inches
Weight0.1 Pounds
Width0.25 Inches
Part Number191.008.11
Model191.008.11
WarrantyCMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment.

9. SpeTool

#ad

Carving, SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut

#ad
SpeTool #ad - Spiral bits used for smoothly upcut groove and slots, Cycles and dados with clean edge and bottom, Plunge Mortises, better than straight bits. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Industrial quality control to ensure best performance. The cnc end mill for plywood, mDF, oak, and any hardwood working and Long service life for sharp. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSPD1/4-1/4-U

10. HQMaster

#ad

HQMaster CNC Router Bits 3.175 Router Bit 1 8 End Mill Flat Nose Carbide Endmill Two Flute Spiral Upcut Milling Cutter Tool Set for Wood PVC MDF Hardwood 10Pcs

#ad
HQMaster #ad - Range of processing: for carving/cutting/engraving/milling/slotting/sculpturing in materials like MDF, plywood, PVC, hardwood etc. Cutting edge length/flute length, 38.

5mm. Cutting edge diameter, 17mm. Perfect cutting: the design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal. Ideal for three-dimensional sculpture, 3D relief sculpturing, density board, nylon, wood, resin, surface machining, ABS, acrylic, plastics, etc. High efficiency: these bits own sharp edge which is able for fast engraving that makes high efficiency, durable, high precision and not easy to break. Dimensions: 1/8" 3. 175mm. Overall length, 1/8" 3. 175mm. Package contents: 10pcs solid carbide spiral upcut bits assorted in storage case. It is smokeless and burr-free while processing.
BrandHQMaster #ad
ManufacturerHQMaster #ad
Weight0.1 Pounds
Part NumberHQ-6979