Top 10 T-Nut Leg Leveler – Furniture Legs

As an Amazon Associate I earn from qualifying purchases.

1. Kiboko


Workbenches, 500 lb. Load Capacity, T-Nut Leg Leveler Set of 4, Adjustable Leveling Feet for Furniture, Tables

Kiboko #ad - Pivoting base 1 1/2" wide, 5 degrees to Work on any Floor, with Plastic Glide Pad. Hex nut at the base of the leveler can be turned for Height Adjustment, Max Height from Floor Surface is 2 1/2", Minimum Height: 5/8". 3/8"-16 thread three prong t-nuts, slot and hex combo on the Top of the Leveler for Adjusting, 7/16" Barrel Diameter of T-nut. Weight rating is 125 lbs per Leg, 500 lbs per set. Set of 4 - 3" leg levelers with t-nuts, medium Duty, 3/8" - 16 thread, Engineering Details and Instructions Included.
BrandKiboko #ad
ManufacturerKiboko LLC #ad
Height1.5 Inches
Length6 Inches
Weight0.41 Pounds
Width4 Inches
Part NumberLA38 3 SCT3816
ModelLA38 3 SCT3816

2. Anwenk


1/4-20x1" Threaded Shank T-Nuts,12 Pack, Anwenk Furniture Levelers Adjustable Furniture Feet Leveling Table Chair Levelers T-Nut Leg Levelers with High-Density Felt

Anwenk #ad - Comes with Installation Instruction. Adjustable furniture levelers- 1” long steel insert with 1/4”-20 thread; 1/2” thick base with high density felt;Sturdy 1” Diameter Base and Fully Adjustable Height from 05” to 1. 25” for maximum Support and Adjustability.

Or, screw in the Levelers and adjust to the desired height. Heavy duty and high quality- commercial quality standard furniture levelers, T-nuts and thread insert are made of stainless steel that support over 100lbs per feet, so a set of four can support furniture over 400lbs! Easy installation- for furniture legs with existing 1/4”-20 thread, pre-drill a 5/16” hole and insert the t-nut for universal installation, simply screw in the leg leveler to adjust the height.

No more folded up cardboard under table legs! these furniture leg levelers with felt allow easy leveling of furniture at home, school or café, to match in same height, office, restaurant, and allows raising your furniture. High density felt floor protectors - pre-installed with high density thick felt to protect your hardwood floor from scratches or harsh noises which works far better than the stick-on pads.
BrandAnwenk #ad
ManufacturerAnwenk #ad

3. Yongle Store


5/16"-18 Thread Size levelers T-Nut Leg Leveler,Set of 4,Adjusting Foot Furniture Levelers |Furniture Feet, Black, Inch Size 5/16" Bolt,4Pack

Yongle Store #ad - Easy to use on new furniture and is great as replacements parts for older furniture. Done! the bolt thread size is 5/16"-18 by 1 inches, 4 pack: 4 Levelers & 4 T-Nuts. Note: please check the size carefully to make sure that it is suitable for your replacement. Works on all surfaces: great on tile, laminate, hardwood, carpet! 5/16 - 18 X 1 inches. Drill a 3/8" hole in each corner, tap in T-nuts, screw in leveler…. Level your chairs and tables with ease. Reduces friction & noise while moving furniture, Hard Nylon Glide is kind to all types of floors including wood.
BrandYongle Store #ad
ManufacturerYongle Store #ad
Weight0.15 Pounds
Part Number43237-2

4. tamu


Leveling Feet Adjustable Furniture Levelers, 5/16 inch Threaded Shank w/T-Nuts Leg Leveler for Table,Chair and Furniture Legs- Adjusts from 0" to 1", Pack of 12 Black

tamu #ad - Done! level your chairs and tables with easy!and the furniture feet can reduces friction & noise while moving furniture! Here's what you get :12 black levelers & 12 T-Nuts. Strong enough:hard nylon glide allow it to bear heavier things. Good for floors:the leveling feet is kind for all types of floors including, hardwood, wood, laminate, tile, floors, carpet!. So you don't need to worry about it! Easily install:drill a 5/16" hole in each corner, tap in T-nuts, screw in leveler….
Brandtamu #ad
Manufacturertamu #ad

5. Impromech


Black Furniture Leveler Kit Black Zinc 4 Prong Tnut Set of 4-3/8-16 Non-Skid Leg Levelers with T-Nuts and Jam Nuts

Impromech #ad - 1 3/8 inch non skid tpr rubber like Base with Black Zinc Plated Cover Shell. Set of 4 – 3/8-16 black non skid levelers Overall Length of 2 3/4 inches. 4 prong 3/8-16 black Zinc Plated Tee Nuts. 1/2 nut on the base of Foot to Adjust Height. Jam nuts are included to Lock and Stabilize Leveler.
BrandImpromech #ad
ManufacturerImpromech #ad



Best for Workbench, Machinery, Cabinet & More, 2 Inch Dia. Base, 1000 LB Capacity, Swivel Adjustable Leg Leveler Feet, UNWIREDD 2-Pack H50 Carbon Steel True Heavy Duty Self Leveling Feet with T-nut

UNWIREDD #ad - Important dear valued customers, please carefully review the product dimensions as shown in the images and intended use before purchasing. This is a true heavy duty product. 3️⃣screw in leveler to desired height. 2 inch diameter base & true heavy duty – the unwiredd leg leveler is made of carbon steel and finished with corrosion and scratch resistance coating.

2️⃣tap in T-nut with hammer. This gives you absolute peace of mind you deserve in your home. Each leveling feet features a wide heavy base and has a load capacity of 1000 lbs making it suitable for a wide range of purposes and withstand durability for years. Stable & quiet – its swiveling base with non-slip pad stops wobbling on uneven floor and reduces vibration.

Easy installation – you can do the installation yourself with just three easy steps: 1️⃣Drill a 2" deep hole using 7/16" drill bit. Swivel & adjustable height – when installed, it allows you to adjust the height from 1. 3” to 2. 6” and angle from 90° to 70° from the floor. We are available 24/7 to provide support. Should you need further information or have any questions, please do not hesitate to ask us on this product listing page.
ManufacturerUNWIREDD #ad
Part NumberUWRD-001-2

7. Impromech Hardware


Heavy Duty Furniture Leveler Tee Nut Kit – Set of 4-3/8-16 Non-Skid Leg Levelers for Cabinets or Tables to Adjust Height of The Legs or Feet Jam Nuts to Stabilize Each Foot Kit with 4 Prong T-Nuts

Impromech Hardware #ad - Jam nuts are included to Lock and Stabilize Leveler. Set of 4 – adjustable heavy duty leveling Feet - 3/8-16 Thread with 1 3/8 inches of Adjustment. Slot on the top and a Nut on the Base of Foot to Adjust Height. 4 prong 3/8-16 zinc Plated Tee Nuts. 1 11/16 inch non skid tpr rubber like Base with Steel Nickle Plated Cover Shell.
BrandImpromech Hardware #ad
ManufacturerImpromech #ad

8. Yongle Store


Yongle Store Furniture Feet, 16Pack,5/16"-18, levelers T-Nut Leg Leveler,Adjusting Foot Furniture Levelers |Furniture Feet, 16 Pack, Inch Size 5/16" Bolt, Black

Yongle Store #ad - Hard nylon glide is kind to all types of floors including wood. The bolt thread size is 5/16 inches by 1inches. 5/16 x 1 inches-. Easy to use on new furniture and is great as replacements parts for older furniture,. Works on all surfaces: Great on tile, laminate, hardwood, carpet!. Drill a 3/8" hole, tap in t-nuts, screw in leveler…. Done! reduces friction & noise while moving furniture, Set of 16-16levelers & 16 T-Nuts, 5/16"-18 Thread Size. Level your chairs and tables with ease.
BrandYongle Store #ad
ManufacturerYongle Store #ad

9. Yongle Store


8 Pack,5/16"-18 Bolt, Inch Size 5/16" Bolt,8Pack, Leg Leveler,Adjusting Foot, Furniture Levelers | Adjustable Felt Foot pad, Leveler with T-Nut, Yongle Store Furniture Feet

Yongle Store #ad - Dimensions and details-the base measures 1" in diameter. Minimum height: 05". 100% satisfaction guaranteed- we are confident that you will be pleased with the purchase of this product. Done! strong & sturdy commercial quality - it also supports 150 lb of load suggestion to 450lbs, making them suitable for many applications commonly found in homes, garages, offices, Up to 600 lbs total capacity for all four levelers, restaurants, and shops.

Set of 8 - 8 levelers & 8 t-nuts, kitchens, workshops, 5/16"-18 Thread Size. Each leveler can be adjusted 3/4 inch in height. Level your chairs and tables with ease.

Maximum height: 1. 5". Drill a 3/8" hole, tap in t-nuts, screw in leveler…. If for some reason you are not, just return the item within 30 days of purchase and we will gladly give you a FULL REFUND. Thread size is 5/16-18 and threads are one inch long. Easy to use on new furniture and is great as replacements parts for older furniture,.
BrandYongle Store #ad
ManufacturerYongle Store #ad

10. Tahikem


2" Thread Length, Heavy Duty Height Adjuster Furniture Leveler Foot with T Nut Bolt, Screw On Cabinet Restaurant Table Chair Self Levelers Leg 2" Base Dia, 4 Set Adjustable Leveling Feet

Tahikem #ad - Easy installation >>> 1 use a 055 inch drill bit to drill a 2 inch deep hole. Universal design >>> our adjustable leg levelers can be placed on tables, chairs, kitchen cabinets, and so much more. Comes with installation instruction.

2 hammer in the insert t-nuts and screw in the levelers to the right position. A more beautiful whole. Whatever your home or workplace needs assistance making leveled, plant stands, our leg levelers are a quick fix while not compromising the look. Please see the dimension picture 2 for reference. Our materials are the best material for heavy duty use, very simple and quick installation to finish up your unbalanced.

Your satisfaction is our pleasure. The base is 2” wide made of nylon to work on any floor. Practical and affordable pieces of hardware make big difference to your life. Practical & strong >>> each leg can support 100 lbs. When you feel the product is not 100% satisfactory, we provide an unconditional return and refund guarantee. Flexible adjustable >>> the leveling feets help to adjust the height of your furniture. Sturdy 0
BrandTahikem #ad
ManufacturerYeejoy #ad
Height2.75 Inches
Length2 Inches
Weight0.7 Pounds
Width2 Inches