As an Amazon Associate I earn from qualifying purchases.
1. APFFSY #ad
Toy Box Hinges Soft Close, Lid Support Hinges Heavy Duty,Soft Close Hinges for Chest Toy Box,Lid Stay Support 50lb/2pcs APFFSY #adAPFFSY #ad
- Durable material — heavy lid hinge, max weight support 50lbs/2pcs. The up-grated version has the advantages of strong bearing capacity, metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the chest slow close hinges guarantee high performance.
Adjustable tension — adjust the toy box hinges soft close tension with allen wrench to fit for lids with different weight. Conditioned soft closing — only with this chest hinges supporting less than 50lbs and keeping two lid support hinges soft close in same tension by your adjustment will soft closing function work perfectly!! The safety hinges will go down slowly, and prevent fingers from getting smashed.
Easy to install important：refer to our install videos ! — the lid closer can be mounted on the left or right side, 110°. Just mark two drilling holes, 90°, also used for side-mounting and top-mounting.
Similar purpose of a gas strut but doesn't self lift, such as toy box hinges, also fit for overhead kitchen cupboard, chest hinges, stays and supports lid where you want it. After installing the lid hinges for wooden box, please tighten the mechanism into Allen wrench hole in the middle of the arms to set up appropriate pressure, prevent lid from slamming shut. It can fit for most lids and allow you to keep your lids stay at any angle. Upward door open adjustable angle of 75°, and screw each mounting bracket. No need to use the diagram on the package！.
2. Apexstone #ad
Apexstone Soft Close Toy Box Hinges Soft Close Toy Chest Hinges Slow Closing Hinges for Toy Chest Toy Box Safety Hinge Soft Close Hinge, Set of 2 #adApexstone #ad
- Length center-to-center: 8. 7 inch220 mm, extended Length Center-to-Center:14. 2 inch360 mm. How to install&adjust it:just install it as the image shown in the description or the instructions in the package, While if you still have problem, please kindly Click "Ask Seller" Besides Your Order for In-time Assistance.
We offer 1 year 100% satisfactory warranty, please kindly contact us for exchange, if unfortunately our SOFT DOWN LID GAS STRUT did not work well, refund or return.
Soft down the door/lid which the side length is less than 30 Inch, the WEIGHT is Less than 33 Lbs. Lids lower gently, ideal for soft cLOSING lid to prevent from slamming so that it won't smash kid's fingers.
3. MORINBO #ad
Morinbo Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install Pack of 2 #adMORINBO #ad
- Easy to install comes with an exclusive original design installation card, only takes 5 minutes to complete the installation by following the install placement measurement card and installation video. Sturdy lid stay with soft close excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers.
Know before purchasing updated manual can be downloaded in amazon page.
Easy to follow installation instructions ensure a perfect install the first time! Each lid hinge can be used for right or left hand mounting. And per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch.
2-way installation morinbo hinges can be installed on top opening or upward opening lids. The lid hinges supports opening the lid at a maximum Angle of 105 degree. They can support lid weight from 5lbs to 10lbs and lower gently; Weight support will be doubled by using 2 lid supports 6lbs-20lbs. Compact design of lid stay hinge the compact design allows for installation in tight fit areas.
4. SafeStay #ad
SafeStay Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Chest, Easy to Install #adSafeStay #ad
- Easy install instructions - easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side.
Small compact design - the compact design allows for installation in tight fit areas. 100% money-back guarantee - if for whatever reason you are unhappy with the product we will refund you, no questions asked! Holds lid open - never worry again about having to prop the lid open.
Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers. This lid stay will hold the lid open until you are ready to close. The lid stay allows the lid to open at a maximum 105 degree angle.
5. Ryf #ad
RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs #adRyf #ad
- Wide application--perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe. Only mark two points for drilling holes, and screw each mounting bracket into its respective place.
Installing screws and Allen wrench in package. Durable lid support hinge--made of zinc ally in satin Nickel, Lid support can be mounted for flap support or bar counter function.
Soft close lid stay-every lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting. Easy to install lid support --the lid hinge is used for side mounting and top mounting. Max weight lid hinge--support 40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side.
6. douper #ad
Douper 200N Gas Struts Heavy Duty Soft Close Lid Support Hinges Automatic Slow Lowering Safety Pneumatic Lid Lifters Gas Springs Pack of 2 #addouper #ad
- Strong enough -- douper 200n heavy duty gas struts can support maximum 30lbs lid and lower gently; Weight support will be doubled with 2 hinges 60lbs/ 2pcs. Warm tips -- douper hinges will not applicable with the lid at width more than 50” and height over 25”.
Note: no adjustments on placement measurements of the hinge mounted on side board. Holds lid open -- these hinges will hold your lid open until you push it down.
Gently close design -- excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers.
Never worry again about having to prop the lid open. Hinges will not work if your lid doesn’t match specified dimension and weight requirement. 75°-105° open angle -- each lid hinge can be used for right or left hand mounting, keep the hinge installed for 75°-105° adjustable opening angles, depending on actual situation. And must with a 9 inch clearance.
7. APFFSY #ad
Max Weight Support 50lb/2pcs, Toy Box Hinges Soft Close,APFFSY Lid Support Hinges,Lid Stay for Chest Wardrobe Closet Cupboard Wooden Box #adAPFFSY #ad
- Adjustable tensionadjust tension with allen wrench to fit for lids with different weight. After installing the folding lid stay hinge, please tighten the mechanism into Allen wrench hole in the middle of the arms to set up appropriate pressure, prevent lid from slamming shut！.
Durable material max weight support 50lbs/2pcs. This up-grated version has the advantages of strong bearing capacity, metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance! Easy to install our soft close hinges can be mounted on the left or right side, 110°.
Adjust by yourself, also used for side-mounting and top-mounting. Upward door open adjustable angle of 75°, 90°, fit for most lids and allow you to keep your lids stay at any angle to your needs! .
Keep lid openthe lid support hinge will hold the lid open until you want to close. Never worry about having to support lid by hand anymore. It's widely usage for box or chamber, window seat, closet, cupboard, chest, such as toy box, and wardrobe lids！. Conditioned soft closingonly with this chest hinges supporting less than 50lbs and keeping two soft close lid supports in same tension by your adjustment will soft closing function work perfectly. It will go down slowly, and prevent fingers from getting smashed.
8. WANLIAN #ad
Gas Strut, Kitchen Cabinet Hinges. 150N/33lb/15KG, Lift Supports, Lid Support, 2 Pack Gas Spring, Gas Shocks, Toy Box Hinges, Soft Close Hinges #adWANLIAN #ad
- Heavy duty gas strut: 150n/33lb /15kg per strut, Total Length: 1063 inch, travel Length: 3. 63 inch. We will refund or replace your order to provide a best solution! Soft close hinges: this lid hinge can stop your toy box lid or cabinet door from slamming down, protect your fingers from being pinched.
If there's a product quality issue or installation problems, please feel free to contact us.
1 year quality warranty: sen offers 1 year 100% satisfactory warranty. Applications: this gas spring lift is suitable for window bench seat with storage box, windows, toy box, rv cabinets or kitchen cabinets and so on. No-rusty: copper core piston and zinc-plating material keep gas strut away from rusting.
9. RUYUFE #ad
Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install, RUYUFE Lid Stay 105 Degree Open with Soft Close #adRUYUFE #ad
- This lid stay is deal for upward opening flaps, cabinetry, piano or butt hinges. Lid stay slow closing -- lid stay support built-in hydraulic dampening device. This lid support will hold the lid open until you are ready to close.
Keep lid hinge stay opening, vertical cabinet doors and storage box, such as toy boxes and vanity lids, WIDE USAGE -- Never worry again about having to prop the lid open. Compact design of lid stay hinge -- the compact design allows for installation in tight fit areas.
Sturdy lid stay with soft close-- the lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 6-10 lbs, Height 18-19 inch.
Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers. Easy to install lid support-- updated manual can be downloaded in amazon page. Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
10. WANLIAN #ad
Gas Spring, Lift Supports, Toy Box Hinges, Gas Strut, Kitchen Cabinet Hinges Hydraulic Support Door Cabinet Hinge Spring, Soft Close Hinges, Pressure:120N/26lb/12KG2 Pack, Gas Shocks, Lid Support #adWANLIAN #ad
- Suitable for gas strut, lift support, display table, lid support, gas spring, Lid Stay, heavy duty kitchen cabinet doors, Cabinets, Gas Shocks, RV Overhead Cabinet Doors, Toy Box or Storage Box etc. If you need to adjust the direction of the joint, you can only turn it to the right.
Pressure:120n/26lb/12kg per strut;length hole center to hole center :9-11/16'';travel:3-14/25'', distance between ball mounts compressed: 6-1/8". Stable & no rusty: gas struts is made of copper core with zinc plating, if unfortunately our SOFT OPEN LID GAS STRUT did not work well, please contact customer service as soon as possible to send installation pictures or videos, which prevents from rusting even aftering using for a few years.
If there is a problem with the product or installation difficulties, please kindly contact us for exchange, refund or return.
The installation must be installed in strict accordance with the size of the installation picture, and the wrong installation size will bend the mountain-shaped hinge fittings on the cabinet door. Please select the correct model strictly according to the data sheet of the detailed picture. It is recommended: one for cabinet door width 600mm/23. 6in to achieve parallel opening and closing synchronization. Choose the model and quantity according to the weight of the actual cabinet door panel.