As an Amazon Associate I earn from qualifying purchases.
EANOSIC #ad - Solid carbide and nano blue coated: the up-cut spiral router bit is made of solid carbide. Cnc spiral bits used for side milling, end milling, cycles and dados with clean edge and bottom, mortises, finish machining, etc.
This provides longevity and produces cutting results of the highest quality. Upcut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1-1/4 inch cutting length, extra long 3 inch for total length.
Clean surface, neat, no glitches. The router bit suit for CNC router and any plunge routers with 1/4" collet. The cnc end mill router bits apply to various wood: such as plywood, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, cast iron, tool steel, MDF, OAK, aluminum alloy.
EANOSIC #ad - End mill bits can smoothly upcut groove and slots, mortises, finish machining, cycles and dados with clean edge and bottom, end milling, better than straight bits. The cnc end mill router bits apply to various wood: such as plywood, and any hardwood working and Long service life for sharp.
This provides longevity and produces cutting results of the highest quality. And nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity.
Clean surface, neat, no glitches. The router bit suit for CNC router and any plunge routers with 1/4" collet. Solid carbide and nano blue coated: the up-cut spiral router bit is made of solid carbide. And also for carbon steel, oaK, soft alloy steel, cast iron, MDF, tool steel, aluminum alloy.
SpeTool #ad - Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length. Industrial quality control to ensure best performance. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet.
EANOSIC #ad - The 1/4-inch flush trim router bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. Professional flush trim router bit with top bearing: 1/4” Shank, 1” Cut Length.
Industrial quality upcut flush trim router bit: made of solid virgin carbide with NANO blue coated. Up to 2. 5x longer life compared to uncoated bits. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use.
SpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Industrial quality control to ensure best performance. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
Freud #ad - 1/4", overall length 2-1/2", Carbide Height 1". Ideal for grooves and dadoes in all composition materials, plywood, hardwood, and soft wood. Combines effective chip removal with a cut unmatched by standard straight bits.
Black i. C. E. Specs: number of cutters 2, shank dia. Use in cnc, hand-held and table-mounted routers. Freud tico hi-density Carbide = 2X increased life and performance vs.
SpeTool #ad - Industrial quality control to ensure best performance. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 2 inch cutting length, 4 inch for total length. The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp.
EANOSIC #ad - Up to 2. 5x longer life compared to uncoated bits. This provides longevity and produces cutting results of the highest quality. The 1/4-inch downcut spiral flush trim router bits apply to various wood: such as Plywood, MDF, OAK, and any hardwood working and Long service life for sharp.
Industrial quality down-cut flush trim router bit: made of solid virgiN carbide with NANO blue coated. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use.
EANOSIC #ad - Up & down cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length. Solid carbide and nano blue coated: the up and down cut spiral router bit is made of solid carbide.
And nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. Clean surface, neat, no glitches.
And also for carbon steel, soft alloy steel, OAK, MDF, cast iron, aluminum alloy. End mill bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits. The cnc end mill router bits apply to various wood: such as plywood, tool steel, and any hardwood working and Long service life for sharp.
1. Whiteside Router Bits
#adWhiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length
#adWhiteside Router Bits #ad - Whiteside router Bits are made with Premium Carbide. Precision ground for proper balance at high RPM. Industrial Quality.More information #ad
| Brand | Whiteside Router Bits #ad |
| Manufacturer | Whiteside #ad |
| Height | 5.5 Inches |
| Length | 2 Inches |
| Weight | 0.06 Pounds |
| Width | 3 Inches |
| Part Number | RU2100 |
| Model | RU2100 |
More information #ad
2. EANOSIC
#ad1/4 inch Cutting Diameter, Extra Long 3 inch Solid Carbide with Nano Blue Coating CNC Router Bits End Mill for Wood Cut, EANOSIC Upcut Spiral Router Bit 1/4 inch Shank, Carving
#adThis provides longevity and produces cutting results of the highest quality. Upcut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1-1/4 inch cutting length, extra long 3 inch for total length.
More information #ad
End mill bits can smoothly upcut groove and slots, better than straight bits. Up to 2. 5x longer life compared to uncoated bits. And nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. Clean surface, neat, no glitches. The router bit suit for CNC router and any plunge routers with 1/4" collet. The cnc end mill router bits apply to various wood: such as plywood, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, cast iron, tool steel, MDF, OAK, aluminum alloy.
| Brand | EANOSIC #ad |
| Manufacturer | EANOSIC #ad |
| Part Number | E202 |
More information #ad
3. EANOSIC
#ad1/8 inch Cutting Diameter, EANOSIC Upcut Spiral Router Bit 1/4 inch Shank, Carving, Extra Long 3 inch Solid Carbide with Nano Blue Coating CNC Router Bits End Mill for Wood Cut
#adThis provides longevity and produces cutting results of the highest quality. And nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity.
More information #ad
Cnc spiral bits used for side milling, etc. Upcut spiral router bit with 1/4 inch shank and 1/8 inch cutting diameter, 1 inch cutting length, extra long 3 inch for total length. Clean surface, neat, no glitches. The router bit suit for CNC router and any plunge routers with 1/4" collet. Solid carbide and nano blue coated: the up-cut spiral router bit is made of solid carbide. And also for carbon steel, oaK, soft alloy steel, cast iron, MDF, tool steel, aluminum alloy.
| Brand | EANOSIC #ad |
| Manufacturer | EANOSIC #ad |
| Part Number | E201 |
More information #ad
4. SpeTool
#adSpeTool 5Pcs Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver
#adMore information #ad
Spiral bits used for smoothly upcut groove and slots, Cycles and dados with clean edge and bottom, Plunge Mortises, better than straight bits. The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp.| Brand | SpeTool #ad |
| Manufacturer | SpeTool #ad |
| Part Number | W04005 |
More information #ad
5. EANOSIC
#adUpcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC 1/4" Shank Up-Cut
#adIndustrial quality upcut flush trim router bit: made of solid virgin carbide with NANO blue coated. Up to 2. 5x longer life compared to uncoated bits. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use.
More information #ad
The spiral router bit suit for CNC router and any plunge routers with 1/4" collet. And nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.| Brand | EANOSIC #ad |
| Manufacturer | EANOSIC #ad |
| Part Number | E2109 |
More information #ad
6. SpeTool
#adSpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving
#adMore information #ad
The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly upcut groove and slots, Cycles and dado with clean edge and bottom, Plunge Mortises, better than straight bits.| Brand | SpeTool #ad |
| Manufacturer | SpeTool #ad |
| Part Number | W04014 |
More information #ad
7. Freud
#adFreud 75-102: 1/4" Dia. Up Spiral Bit
#adBlack i. C. E. Specs: number of cutters 2, shank dia. Use in cnc, hand-held and table-mounted routers. Freud tico hi-density Carbide = 2X increased life and performance vs.
More information #ad
Fast chip removal with excellent quality and long life. 1/4", overall Dia. Black i. C. E. Standard uncoated bits. Computer-designed flutes provide chip removal required in production settings. Suited for cutting mortises and routing deep blind holes. Coating for cool cutting edge and superior chip evacuation. Manufacturer's limited lifetime warranty. Freud premier Solid Carbide.| Brand | Freud #ad |
| Manufacturer | Freud #ad |
| Height | 1 Inches |
| Length | 1 Inches |
| Weight | 0.08 Pounds |
| Width | 1 Inches |
| Part Number | 75-102 |
| Model | 75-102 |
| Warranty | Freud Limited Tooling Warranty. Contact Freud customer service for more details. 800-334-4494 |
More information #ad
8. SpeTool
#adSpeTool Spiral Router Bits with UpCut 4 inch Extra Long1/4 inch Cutting Diameter 2 inch Cutting Length CNC Router Bit Carving Tool
#adMore information #ad
The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Spiral bits used for smoothly upcut groove and slots, Cycles and dado with clean edge and bottom, Plunge Mortises, better than straight bits.| Brand | SpeTool #ad |
| Manufacturer | SpeTool #ad |
| Part Number | SPXL-1/4-1/4-U |
| Model | SPXL-1/4-1/4-U |
More information #ad
9. EANOSIC
#ad1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC 1/4" Shank Down-Cut, Downcut Spiral Flush Trim Router Bit
#adIndustrial quality down-cut flush trim router bit: made of solid virgiN carbide with NANO blue coated. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use.
More information #ad
The downcut spiral router bit suit for CNC router and any plunge routers with 1/4" collet. Professional downcut flush trim router bit with top bearing: 1/4” Shank, 1” Cut Length. And nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity.| Brand | EANOSIC #ad |
| Manufacturer | EANOSIC #ad |
| Part Number | E2110 |
| Model | E2110 |
More information #ad
10. EANOSIC
#adEANOSIC Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters for Mills Machines
#adAnd nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. Clean surface, neat, no glitches.
More information #ad
This provides longevity and produces cutting results of the highest quality. The router bit suit for CNC router and any plunge routers with 1/4" collet. Spiral bits used for side milling, finish machining, end milling, etc. And also for carbon steel, soft alloy steel, OAK, MDF, cast iron, aluminum alloy. End mill bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits. The cnc end mill router bits apply to various wood: such as plywood, tool steel, and any hardwood working and Long service life for sharp.
| Brand | EANOSIC #ad |
| Manufacturer | EANOSIC #ad |
| Part Number | E2106 |
More information #ad
