Top 7 Wolfcraft Drill Guide – Power Drill Chucks

As an Amazon Associate I earn from qualifying purchases.

1. Wolfcraft

 #ad

Wolfcraft 4525404 Multi-Angle Drill Guide Attachment For 1/4In. & 3/8In. Drills,Silver

#ad
Wolfcraft #ad - Drill guide that can be used in horizontal, vertical or angle positions. Fits all 1/4-inch or 3/8-inch drills. Guide-bars themselves have springs for a quick return when doing repetitive drilling. Angle positions can go up to 45 degrees, and rubber pads in the base hold the guide in place. Drill adapter itself slides up and down on guide-bars.
BrandWolfcraft #ad
ManufacturerWolfcraft #ad
Height11.75 Inches
Length5.25 Inches
Weight0.6 Pounds
Width5.5 Inches
Part Number4525404
Model4525404
WarrantyLimited Lifetime

2. Milescraft

 #ad

Milescraft 1318 Drillmate Drill Guide with chuck

#ad
Milescraft #ad - Perfect for straight or angled drilling, drilling on the edge of a board or on round stock. Adjustable depth stop and spring action control of the head. Angle cuts of 45 degree to 90 degrees, with a built in angle read out in the all metal base. Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter. Attaches to all 3/8" and 1/2" power drills and it also includes a 3/8" Capacity chuck with key.
BrandMilescraft #ad
ManufacturerMilescraft Inc. #ad
Height2 Inches
Length16.63 Inches
Width7.13 Inches
Part Number1318
Model1318

3. General Tools

 #ad

Folds Flat for Storage, 36/37 Precision Drill Guide For 3/8-Inch or 1/2-Inch Power Drills, Portable & Lightweight

#ad
General Tools #ad - Adjustable- adjusts from 0 to 45 degrees in 5-degree increments in either direction of vertical drill position. Positive stop- built-in depth stop for accurate drill depth. A slide lock facilitates sanding and buffing. Works with dowels- v-groove for positioning round stock, pipe or tubing. Stable- anchoring pins to hold the guide securely in place on flat surfaces, narrow edges or large tubing. Built in protractor- drills accurate right-angled or variable-angled holes with the built-in protractor scale.
BrandGeneral Tools #ad
ManufacturerGeneral Tools #ad
Height2 inches
Length13 inches
Weight0.94 Pounds
Width6 inches
Part Number36/37
Model36/37

4. Milescraft

 #ad

Milescraft 1312 DrillBlock- Handheld Drill Guide

#ad
Milescraft #ad - Non-slip feet holds the Drillblock in place while preventing both slipping and marring on wooden work pieces. The two product v-grooves allow for usage on corners and even cylindrical surfaces too. Centerlines ensure accurate alignment when drilling into various surfaces. Package dimensions:3. 05"l x 5. 33"w x 14. 48"h.
BrandMilescraft #ad
ManufacturerMilescraft Inc. #ad
Height1.25 Inches
Length8 Inches
Weight0.8 Pounds
Width2.75 Inches
Part Number13120103
Model1312

5. KREG

 #ad

Kreg R3 Jr. Pocket Hole Jig System Jig System

#ad
KREG #ad - Pocket hole jig system for do-it-yourselfers. The kreg jig jrr3 is an amazing repair jig and an exceptionally handy addition to any tool collection.

Pocket hole jig system for do-it-yourselfers. Solid metal drill guide. Easy to adjust for materials 1/2-Inch to 1-1/2-Inch. Includes drill and drive bits, clamp pad adapter, depth collar with hex key, 5 sizes of pocket hole screws, case. Whether you're crawling under a table to make a quick repair or taking Kreg Joinery on the road. Lifetime. Easy to use and install. Solid metal drill guide. Includes drill and drive bits, clamp pad adapter, depth collar with hex key, 5 sizes of pocket hole screws, case. Lifetime warranty. Easy to adjust for materials 1/2-Inch to 1-1/2-Inch.
BrandKREG #ad
ManufacturerKreg Tools #ad
Height5 Inches
Length8 Inches
Weight3 Pounds
Width2.25 Inches
Part NumberR3
ModelR3
WarrantySolid metal drill guide insert assures a clean, accurate pocket hole. Hardened steel drill guides support the drill bit and feature a LIFETIME WARRANTY! 30 day complete satisfaction guarantee

6. Estink

 #ad

Drill Stand for Hand Drill,Universal Bench Clamp Drill Press Floor Stand Workbench Repair Tool for Drilling Collet Workshop,Single Hole Aluminum base

#ad
Estink #ad - Materialelectric drill press stand constructed with aluminum ally base, solid column bar, durable to use. Available drilldesigned for use with electric drills with collar diameter of 38-43mm 1.

7"or 1. 5", with black plastic ring for better fix. Featuresthis drill stand is ideal for holding your drill steady during use and allows for much more precise drilling than hand-held operation. Drill depthdrilling depth up to 60mm2. 4", single hole for mounting. You will get: the package includes 1 x base, 1 x column bar, 1 x lower limit Fixed sleeve, 1 x Rocker, 2 x Adjustable plastic fixed sleeves, 1 x Hex wrench 5mm.
BrandEstink #ad
ManufacturerEstink #ad

7. Big Gator Tools

 #ad

Big Gator Tools BGT V-4 Pack V-Drill Guide SAE + Number Hole Sizes 4pc Kit

#ad
Big Gator Tools #ad - Only shipping one of each V-Drill Guides "NO" other tools or ruler included. Centers the holes on pipes, dowels & outside corners. Non-plated material with light oil coating to prevent rust.

Bottom surface is precision ground to ensure stability & accurate perpendicular alignment on flat surfaces. Automatically squares up the drill with the surface. Portable, pocket-sized and housed in a handy plastic storage case w/surface ridges to prevent opening, PegBoard-Friendly. Round stock hole alignment marks on one side. Flat side allow 90° drilling into flat surfaces-just clamp and drill. Prevents drill bit wander. Includes: 1 std500np, 1 std1000dgnp, 1 std2000dgnp & 1 sDGMINI. Alignment marks on both sides, to line up on center. Special nickel alloyed steel heat treated for durability.
BrandBig Gator Tools #ad
ManufacturerBig Gator Tools #ad
Height1 Inches
Length5.5 Inches
Weight2.5 Pounds
Width1 Inches
Part NumberBGT V-4 Pack
ModelBGT V-4 Pack