Top 8 MT1 Pen Mandrel – Power Lathe Accessories

As an Amazon Associate I earn from qualifying purchases.

1. PSI Woodworking

#ad

PSI Woodworking PKMS1SET Pen Mandrel Saver Package, 1 Morse Taper 1MT

#ad
PSI Woodworking #ad - No need for the knurled nut that sometimes gets lost, misplaced, or stripped. Great for turners of all skill levels. Perfect system to avoid bent mandrel shafts and ruining the point on your live center. System adapts to the length of your project. Includes 7mm drill bit, #1mt mandrel saver tailstock center, 5 7mm bushings, & #1MT basic mandrel.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking Products #ad
Height1.5 Inches
Length12.2 Inches
Weight0.65 Pounds
Width1.5 Inches
Part NumberPKMS1SET
ModelPKMS1SET
Warranty2 years under normal use

2. Taytools

#ad

Handles Blanks Up to 5 Inches, Overall Length 9 Inches, Taytools 465517 Pen Turning Lathe Mandrel Morse Taper MT1 Quick Adjust

#ad
Taytools #ad - The big advantage of this pen mandrel is its ability to easily adjust to different blank sizes. Simple slide the brass compression fitting where you want it and tighten. Mandrel is. 245" in diameter and will handle blanks up to 5” in length. The threaded end works with a live center. Overall length is 9”. Inset your blank and tighten the brass knurled nut on the threaded end with finger pressure. Features a true fitting #1 Morse Taper, which promotes a secure fit to the headstock of the lathe.
BrandTaytools #ad
ManufacturerTaylor Toolworks #ad
Part Number465517

3. PSI Woodworking

#ad

PSI Woodworking PKM-BL Screw-On Pen Mandrel 1" x 8tpi

#ad
PSI Woodworking #ad - Also includes 7 7mm bushings, 1 knurled nut, 1 7mm Brad point drill bit. 7mm mandrel shaft. 244" od. Screw-on pen mandrel pre-threaded to 1" x 8TPI. Replacement shafts XPKM-ELC2. Compatible with psi Woodworking mandrel savers Pkmsts1 & Pkmsts2.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking Products #ad
Height1.7 Inches
Length10.2 Inches
Weight0.64 Pounds
Width1.7 Inches
Part NumberPKM-BL
ModelPKM-BL
Warranty2 years under normal use

4. Taytools

#ad

Taytools 467351 Pen Turning Lathe Mandrel Saver Morse Taper MT1 Liver Center

#ad
Taytools #ad - This mandrel saver is a must-have accessory for pen turners. Will work with almost any mandrel with a shaft diameter of. 245 inches of or smaller. This mandrel saver allows the mandrel shaft to extend into or through the hollow end and provides support without putting pressure on the end of the mandrel.

The pen bushings press against the live center with little to no pressure on the mandrel shaft. Tightening up the tube and bushing assembly is done by turning your tailstock quill adjustment wheel. This mandrel saver eliminates damage to mandrels and out of round pen blanks. Tailstock mount is #1 MT Morse Taper. Mandrels can easily deflect or bend when the tailstock center point is appropriately tightened into the indentation in the end of the mandrel.
BrandTaytools #ad
ManufacturerTaylor Toolworks #ad
Part Number467351

5. Hurricane Turning Tools

#ad

Pen Mandrel Bundle with Mandrel Saver, Hurricane Turning Tools, 1MT

#ad
Hurricane Turning Tools #ad - Material: Steel. Set includes a 7 mm pen mandrel, 5 spacer bushings and the Mandrel Saver Tailstock Center. Headstock mount: #1 MT Morse Taper.
BrandHurricane Turning Tools #ad
ManufacturerHurricane Turning Tools #ad
Height1 Inches
Length10 Inches
Weight0.5 Pounds
Width1 Inches
Part NumberHTT-ACC-PMBS-1MT

6. WEN

#ad

WEN PM01 Wooden Lathe Pen-Turning MT1 Mandrel

#ad
WEN #ad - Designed to fit the WEN 3420 wood Lathe. Tapered morse maximizes compatibility with most MT1 wood lathes. Includes 5 slimline SPACER bushings. Turn pens, pencils and more. 1/4-inch diameter shaft 7mm runs through the center of the workpiece.
BrandWEN #ad
ManufacturerWEN #ad
Height3.1 Inches
Length11.8 Inches
Width3.1 Inches
Part NumberPM01
ModelPM01

7. Peachtree Woodworking

#ad

PEN MANDREL MT-1 BY PEACHTREE WOODWORKING PW7001

#ad
Peachtree Woodworking #ad - Includes compression fitting and brass tightening nut Bushings not included. Precision machined for accuracy and will run true. Not guaranteed to accept bushings from other brands of pen mandrels. Compression fitting acts as an adjustable stop. Able to hold two barrels at a time.
BrandPeachtree Woodworking #ad
ManufacturerPEACHTREE WOODWORKING #ad
Part Number7001

8. SAVANNAH

#ad

Pen Mandrel Pro MT-1

#ad
SAVANNAH #ad - Precision machined steel shaft. A pen turning essential. Morse taper means no need for a drill chuck. Turning shorter blanks is easier with the Pen Mandrel Pro. Works great with a live center not included.
BrandSAVANNAH #ad
ManufacturerSavannah #ad
Part Number7445