Top 9 16-gauge Kitchen Sink – Single Bowl Kitchen Sinks

As an Amazon Associate I earn from qualifying purchases.

1. Kraus

#ad

Kraus KHU101-17 Standart PRO 16 Gauge Undermount Single Bowl Kitchen Sink, 17 Inch, Stainless Steel

#ad
Kraus #ad - Undermount design creates a seamless transition from sink to countertop and makes it easy to wipe water and crumbs straight into the sink. Durable and dent-resistant sink made with premium TRU16 real 16-gauge T304 stainless steel. Outer sink dimensions: 17 in. Engineered for easy draining with rear-set drain opening and channel grooves to keep sink free of standing water. W x 10 in. L x 17 in. D; minimum cabinet Size: 21 in. Kitchen set includes: Sink, drain assembly, Kraus kitchen towel, mounting hardware, cutout template.
BrandKraus #ad
ManufacturerKraus #ad
Height10 Inches
Length17 Inches
Weight17 Pounds
Width17 Inches
Part NumberKHU101-17
ModelKHU101-17
WarrantyLifetime Warranty

2. Ruvati

#ad

RVH7300, Ruvati 30-inch Undermount 16 Gauge Tight Radius Kitchen Sink Stainless Steel Single Bowl

#ad
Ruvati #ad - Included in box: sink, cutout template, two 2 basket strainer drains, Bottom Rinse Grids, Mounting Clips and Installation Guide | Limited Lifetime Warranty - Ruvati USA.

Exterior dimensions: 30" wide x 18" front-to-back | Interior Dimensions: 28" wide x 16" front-to-back x 10" bowl depth. Heavy duty sound guard padding and undercoating to minimize noise | Tight radius inside corners make it easy to keep clean. Commercial grade brushed finish - Easy to clean and long-lasting | Sloped bottom with grooves to allow complete water drainage. 16 gauge thick premium t-304 grade stainless steel 18/10 Chromium/Nickel - 37% thicker than most standard kitchen sinks.
BrandRuvati #ad
ManufacturerRuvati #ad
Height10 Inches
Length18 Inches
Width30 Inches
Part NumberRVH7300
ModelRVH7300
WarrantyLifetime

3. Kraus

#ad

Kraus KHU100-32 Standart PRO 16 Gauge Undermount Single Bowl Stainless Steel Kitchen Sink, 32 Inch

#ad
Kraus #ad - A best-selling stainless steel sink paired with a commercial kitchen faucet for an in-demand high-end look. Features extra-thick pads covering over 80% of the sink and non-toxic undercoating for superior protection against noise | Kraus provides all mounting hardware, cut-out template, installation and care instructions.

Made of stainless steel | corrosion and rust-resistant, will not fade over time | Set includes Sink, Drain Assembly with Strainer, Protective Bottom Grid & Kitchen Towel. Resilient and easy to clean commercial-grade satin finish resists corrosion and rust & matches most kitchen appliances. Product dimensions | overall – 32” l x 19” w x 10” d | min cabinet size – 36” | Bowl – 10” D x 30” L x 17” W.
BrandKraus #ad
ManufacturerKraus #ad
Height10 Inches
Length32 Inches
Weight26 Pounds
Width19 Inches
Part NumberKHU100-32
ModelKHU100-32
WarrantyLimited Lifetime

4. Ruvati

#ad

Ruvati RVH8350 33-inch Workstation Ledge 50/50 Double Bowl Undermount 16 Gauge Stainless Steel Kitchen Sink

#ad
Ruvati #ad - 16 gauge premium t-304 grade stainless steel 18/10 chromium/nickel will never rust or stain | Commercial grade BRUSHED FINISH - Easy to clean and long-lasting. Exterior dimensions: 33″ wide x 19″ front-to-back | interior dimensions: 15″ x 16″ left x 15″ x 16″ right | Bowl Depth: 10″ | Minimum Base Cabinet Size: 36″ | Standard 3.

5″ drain opening will fit any garbage disposal unit. Unlike satin finish, our brushed-finish hides scratches and matches well with your kitchen appliances. Workstation sink with single-tier track - overhanging lips on the front and back act as a track for sliding the built-in accessories | Includes solid wood CUTTING BOARD, deep STAINLESS STEEL COLANDER, and dish-drying roll-up rack that slide on the ledges converting your sink to a workspace.

Included in box: sink, bottom rinse grids, cutout Template, Colander, Cutting Board, Basket Strainer Drain, Roll-up Rack, Mounting Clips and Installation Guide. Heavy duty soundguard undercoating and thick rubber noisedefend padding – minimizes noise and reduces condensation | edgeX 10mm Tight Radius – Ruvati’s unique 10mm radius inside corners offer a slightly curved corner for easy cleaning.
BrandRuvati #ad
ManufacturerRuvati #ad
Height10 Inches
Length19 Inches
Weight50 Pounds
Width33 Inches
Part NumberRVH8350
ModelRVH8350
WarrantyLifetime

5. iBune

#ad

16 Gauge Stainless Steel Single Bowl Bar Prep Kitchen Sink, Barhon 32 Inch Kitchen Sink Undermount, with Drain and Grid

#ad
iBune #ad - X-flowing water guideline: bottom sink grid intercepting garbage helps drainage; X-shaped drain grooves direct water toward drain fast to prevent blockage. Handcrafted brushed technology makes it anti-scratch and anti-rust during daily use, which ensures the sink long lasting.

16-gauge t304 stainless steel: made of extra-tough t304 stainless steel for premium durability and performance. Limited lifetime warranty promised. Excellent noise-defend sink: adopted with 3mm thick sound-absorbing pads and protective undercoating could effectively reduce noise and vibration from dish washing, for creating a quieter kitchen experience. Dimensions: overall- 32”l x 18”w x 10”d; bowl- 30”l x 16”w x 10”D; Minimum cabinet size- 35”. Package & warranty: 1x 32 inch kitchen sink; 1x bottom rinse grid; 1 x drainer. If any questions about this sink, welcome to contact us at any time.
BrandiBune #ad
ManufactureriBune #ad

6. Ruvati

#ad

RVH8301, Ruvati 32-inch Workstation Ledge Tight Radius Undermount 16 Gauge Kitchen Sink Single Bowl

#ad
Ruvati #ad - Included in box: sink, cutout template, bottom rinse Grid, Cutting Board, basket strainer drain, Mounting Clips and Installation Guide | Limited Lifetime Warranty - Ruvati USA. Exterior dimensions: 32" wide x 19" front-to-back | interior bowl dimension: 30-3/8" wide x 16" front-to-back x 10" bowl depth | MINIMUM BASE CABINET Size: 36" | Standard 3.

5" drain openings will fit any garbage disposal unit. Edgex 10mm tight radius - ruvati's unique 10mm radius inside corners offer a slightly curved corner for easy cleaning while at the same time retaining the resolutely modern look | 16 GAUGE Premium T-304 Grade Stainless Steel 18/10 Chromium/Nickel will never rust or stain. Workstation sink with single-tier track - overhanging lips on the front and back act as a track for sliding the built-in accessories | Includes solid wood CUTTING BOARD, deep STAINLESS STEEL COLANDER, and dish-drying roll-up rack that slide on the ledges converting your sink to a workspace.

Heavy duty sound guard undercoating and thick rubber padding to minimize noise and reduce condensation | Sloped bottom with grooves to allow complete water drainage | Commercial grade BRUSHED FINISH - Easy to clean and long-lasting.
BrandRuvati #ad
ManufacturerRuvati USA #ad
Height10 Inches
Length32 Inches
Width19 Inches
Part NumberRVH8301
ModelRVH8301

7. Kraus

#ad

Gunmetal, 32 Inch, Kraus KWU110-32/PGM Kore Workstation 33 inch Topmount Drop-In 16 Gauge Stainless Steel Single Bowl Kitchen Sink in PVD

#ad
Kraus #ad - W x 10 in. Workstation sink with an integrated ledge allows you to slide accessories across the sink so you can prep, roll-up dish drying rack, and clean up without losing any workspace on the kitchen counter – a unique GUNMETAL BLACK FINISH offers a modern yet timeless appearance and matches black stainless steel appliances, serve, drain assembly, acacia cutting board, making this sink a showpiece in any kitchen – OUTER SINK DIMENSIONS: 32 in.

L x 19 in. D – bowl dimensions: 30 in. Durashield pvd technology: innovative finish application results in a brilliant and functional color coating that bonds completely to the steel, improving durability with superior resistance to abrasion, chips, and corrosion – SPOT-RESISTANT: Sandblasted matte texture resists water spots and fingerprints while enhancing the aesthetic appearance of the sink with a shimmering effect – HIGH-PERFORMANCE 16 GAUGE STEEL: Constructed from proprietary KRAUS TRU16 – the thickest 16-gauge stainless steel for superior durability and resistance to dents and damage. Spacious single bowl with rear off-set drain creates an uninterrupted surface with generous workspace for large cookware and stacks of dishes, increases storage space underneath the sink – UNDERMOUNT DESIGN creates a seamless transition from countertop to sink for a contemporary look and easy cleaning – No exposed mounting rim to trap food particles and debris – SUPER SILENT SINK: Proprietary NoiseDefend soundproofing technology with extra-thick pads that cover all sides of the sink eliminates noise and vibration – Fully insulated with anti-condensation undercoating that prevents water damage.

Kit includes: sink, matching protective bottom grid, and decorative drain cover. D – minimum cabinet Size: 36 in. Removable decorative drain cover in matching finish conceals drain opening and garbage disposal for a clean look.
BrandKraus #ad
ManufacturerKraus #ad
Height10.5 Inches
Length32 Inches
Width19 Inches
Part NumberKWU110-32/PGM
ModelKWU110-32/PGM

8. Ruvati

#ad

RVM5931, Ruvati 31-inch Undermount Kitchen Sink 16 Gauge Stainless Steel Single Bowl

#ad
Ruvati #ad - Curved inside corners and sloped bottom ensures perfect water drainage and makes it easy to clean. Included in box: sink, decorative drain cover, cutout Template, basket strainer drain Assembly, Bottom Rinse Grid, Mounting Clips and Installation Guide | Limited Lifetime Warranty - Ruvati USA.

16-gauge thick stainless steel: ruvati kitchen sinks are made with premium T-304 stainless steel. They are 37% thicker than most standard kitchen sinks and are built to last. Unlike sinks with a satin finish, our sinks hide scratches and match well with your stainless steel kitchen appliances.

Commercial-grade brushed finish: this prep sink is made with a long-lasting brushed steel finish. Exterior dimensions: 31" wide x 18" front-to-back | interior dimensions: 29" wide x 16" front-to-back| Bowl Depth: 9" | Minimum Base Cabinet Size: 33" | Standard 3. 5" drain opening will fit any garbage disposal unit.
BrandRuvati #ad
ManufacturerRuvati USA #ad

9. hykolity

#ad

16 Gauge Single Bowl Stainless Steel Sink with All Accessories, Hykolity 32-inch Workstation Undermount Kitchen Sink

#ad
hykolity #ad - Workstation sink dimensions: 32" l x 19" w x 10" d; interior dimensions: 30"l x 16. 2"w x 10"d; minimum cabinet size: 36 in. Deep sink with tight-radius corners and offset drain creates an uninterrupted workspace for washing your largest cookware, like stock pots and baking sheets. Standard 3. 5" drain openings will fit any garbage disposal unit.

Heavy-duty & rust-resistant finish: made with extra-thick tru16 real 16-gauge always 1. 5mm thick construction for superior strength and durability. The commercial-grade t304 stainless steel with satin finish ensures that it is highly resistant to dirt and grime, easily wipes clean, and matches most kitchen appliances. Noisedefend soundproofing: including extra-thick pads and protective undercoating that absorb noise and vibration when the sink is in use. Engineered for rear drain: ensures dishes don’t settle on the drain and prevent water flow while the X drain grooves in the basin channel water towards the drain, keeping your sink clean and dry.

Please contact us by Amazon email or official website, our support team is on standby for you. Lifetime limited warranty: hykolity kitchen sink provides a lifetime warranty, satisfaction guaranteed with customer service that puts you first. Easy installation: this single bowl stainless steel kitchen sink with integrated ledge is undermount installation for a sleek and seamless look. It comes with all the necessary accessories: roll-up dish drying rack, bamboo cutting board won’t crack or warp, DISH GRID and STRAINER, The mounting hardware that help you to finish an easy installation.
Brandhykolity #ad
ManufacturerHykolity #ad
Height10 Inches
Length32 Inches
Weight160 Pounds
Width19 Inches
Part NumberKS3219S-EG-1P