Top 9 500W Spindle Motor – Power Milling Machines

As an Amazon Associate I earn from qualifying purchases.

1. Beauty Star

#ad

Cooled CNC Spindle Milling Motor 0.5KW 52MM ER11 cnc Spindle Motor DIY DC 100V For PCB Milling Machine, 500W Spindle Motor

#ad
Beauty Star #ad - 100% service satisfactory. High precision spindle run out 001-003; speed: up to idle up to 11000 rev / min. We provided this spindle with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing. Air cooled spindle - 110vac mach3 - analog Input; Torque: 5000G/CM. Can be used for wood carving pcb drilling, Pumps & Conveyors, applied to Lathes, Mills, Car Hoists, etc. Operating voltage: 100vdc; power: 500W; Spindle diameter: 52mm.
BrandBeauty Star #ad
ManufacturerBeauty Star #ad
Part Number43

2. MYSWEETY

#ad

MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving, CNC Spindle

#ad
MYSWEETY #ad - 52mm mount bracket- made of high quality cast aluminum, Chuck portion length: 45MM, this spindle motor bracket clamp is strong and durable. Diameter: 52mm, Chuck portion diameter: 16mm. Er11 collet chuck- 13pcs er11 collet set gripping range: 1mm to 7mm1mm, 3mm, 1.

5mm, 5. 5mm, 2. 5mm, 6. 5mm, 2mm, 5mm, 6mm, 3.5mm, 4mm, 4. 5mm, 7mm. Run-out tolerance 001mm. For cnc milling lathe Tool & Work holding Engraving machine. Please install in the place that is draughty, no dramatic impact, no vibration, no conductive metal particle. Motor length: 200mm, 000 rev / min, input: ac110v, Power: 500W, Torque: 5000G/CM.

Speed power switch- input voltage: ac110v/220v, no explosion hazard medium, 50/60Hz. Cnc spindle kit 500w- 1 x 500w air-cooled spindle motor, 13 x er11 collect, 1 x 52mm Mount bracket, 1 x AC110V/220V Speed Governor with MACH3, 4 x Screwsfree. Output voltage: DC0-100V. Insulation resistance:> 2 megohms, Speed: Up to idle up to 12, High precision spindle run out 001-003.
BrandMYSWEETY #ad
ManufacturerMysweety #ad
Part Number500W

3. RATTMMOTOR

#ad

RATTMMOTOR 500W 48VDC Air-cooled Spindle Motor 12000RMP + ER11 Chuck 3.175mm Collet for CNC Engraving Router Milling Machine, 500W Spindle Motor

#ad
RATTMMOTOR #ad - Diameter: 52mm; Total length of motor:200mm. Speed: idling speed can reach 12000RMP. Applications: can be used for solid wood, carving, PCB, drilling, etc. Power: 500w; operating Voltage: 48VDC. Spindle radial runout 001-003mm high accuracy; Torque: 600N. M.
BrandRATTMMOTOR #ad
ManufacturerRTM #ad
Part Number500W

4. Yofuly

#ad

Yofuly ER16 High Speed Air Cooled Brushless Spindle Motor + DC Brushless Motor Controller + DC 48V Power + 55mm Clamp+11PCS ER16 Collet Set for DIY Engraving, CNC Spindle 500W

#ad
Yofuly #ad - Compatible square wave has Hall and no Hall, with potentiometer speed control function. Please feel free to contact us if you have any questions. Long life - the wear of the brushless motor is greatly reduced, and the friction of the bearing is mainly left, and the service life is greatly improved.

Power - input: ac110/260 v, output: dc 48 v, 12. 5 a. We will give you a satisfactory solution. Dc brushless motor controller - commonly used for 24v, 36V, 48v three-speed voltage, ranging from 20V to 50V. Low interference - there is no spark generated when the brush motor is running, which greatly reduces the interference of the spark to the remote radio. Low noise - without the brush, the noise is much lower, the friction is greatly reduced during operation, and the stability is greatly improved.
BrandYofuly #ad
ManufacturerYofuly #ad
Height5.91 Inches
Length10.24 Inches
Width7.09 Inches
Part NumberYofuly

5. Konmison

#ad

Konmison 1Set Mini CNC Lathe Air Cooled 500W Spindle Motor CNC 0.5KW with 52mm Clamps and 110V Mach3 Power Converter Spindle + 13pcs ER11

#ad
Konmison #ad - Operating voltage: 100vdc; power: 500W; Spindle diameter: 52mm. High precision spindle run out 001-003; speed: up to idle up to 11000 rev / min. Applied to lathes, pumps and Conveyors, Mills, Car Hoists, etc. Air cooled spindle - 110vac mach3 - analog Input; Torque: 5000G/CM.
BrandKonmison #ad
ManufacturerBeauty Star #ad
Part Number200062

6. RATTMMOTOR

#ad

RATTMMOTOR 500W CNC Air Cooled Spindle Motor ER11 12000RMP + Input Voltage AC110V-220V Speed Controller with Power Supply + 52mm Clamp for CNC Router Milling Machine

#ad
RATTMMOTOR #ad - Air cooled spindle-- power: 500w; idling speed: 2000-12000r/min; Torque:05nm; diameter: 52mm. Speed controller: input voltage: ac100-ac220v±10% global voltage 50/60Hz; Current Limit: 6A; Wiring: Terminal type Convenient and fast.

Note: this motor has quiet operation, and the rear end of the motor is reinforced with a cooling fan, small volume and high speed, which can be safely worked for a long time!. Adopt pulse width technology to make the speed more stable, and the speed is high under low speed. With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.
BrandRATTMMOTOR #ad
ManufacturerRTM #ad

7. mcwdoit

#ad

Mcwdoit CNC Spindle Kit 500W Air Cooled 0.5kw Milling Motor + Spindle Speed Power Converter + 52mm Clamp + 1/8’’ 1/4’’ 6mm ER11 Collet + 10pcs CNC Bits for DIY Engraving

#ad
mcwdoit #ad - Thanks. Adjustable speed power supplyinput: ac 110/220v±10%, 50/60hz; output: dc 0-100V, maximum current: 6A; Support: Manual Speed Adjustment or Mach3 G code Speed Adjustment.

Er11 collect 2pcs - 1/8'' 3. 175mm ; 2pcs - 6 mm; 2pcs - 1/4'' 6. 35mm. Milling cutter3. 175mm1/8'' shank, 5pcs flat nose spiral Bit 2-Flute + 5pcs V-shaped End Mill Bit. Match with the commonly used milling cutters, avoid buying collects that are not needed. 500w spindle & clampoperating voltage: dc 24-100v ; maximum current: 6A; Speed: 3000-12000rpm; Diameter: 52mm; Torque: 05nm. Service satisfactory If you have any questions, please contact us.
Brandmcwdoit #ad
ManufacturerWAM Direct #ad

8. Hilitand

#ad

ER11 Spindle Motor High Speed Brushless 500W Air Cooled CB DIY Engraving Machine Accessories

#ad
Hilitand #ad - Suitable for wood carving/drilling - the spindle Motor can be widely used on equipment of high control demands and high rotation speed such as solid wood PCB carving, drilling and so on.

Satisfaction guarantee - we care for every customer’s feeling. If this product does not meet or exceed your expectations, please send it back for a 100% refund no questions asked. Basic parameter - working voltage: 100vdc, rotating speed: Max. Good performance - runs smoothly with much lower noise, DIY engraver accessories, convenient to replace the broken one. High spped&high precision - high speed, 000 revolutions per minute, the idling can reach 12, high precision, spindle radial run-out 0.01-003. 12000 rpm, insulation resistance: >2MΩ, Dielectric strength: 400V.
BrandHilitand #ad
ManufacturerHilitand #ad
Height2.36 Inches
Length8.66 Inches
Width3.94 Inches
Part NumberHilitandspnauqh0zm

9. Genmitsu

#ad

52mm Diameter for 3018-PRO, Genmitsu Aluminum Z Axis Spindle Motor Mount, 300-500W Spindle Holder

#ad
Genmitsu #ad - It is practical and ideal for Genmitsu 3018-PRO. Delicate appearance: all metal design, drop in upgrade ready. You can adjust the height of the Z-axis manually without power.

Stable and reliable performance: Can hold the motor firmly to increase stability and reduce noise. High strength and long service life. Compared with the original spindle holder, there is a Z-axis rotary knob on its top. Upgrade your 3018-pro: upgrade with a more powerful 300-500w motor with this 52mm spindle mount. Detailed assembly guide: with the detailed and clear installation guide in the package you can exchange the spindle hold on your own. Limit switches and linear bearings are pre installed. High quality: the spindle carriage is made of high-quality aluminum for better rigidity and durability. Matches your PRO stock colors with the anodized blue plating.
BrandGenmitsu #ad
ManufacturerGenmitsu #ad