Top 9 Axle Bearing Puller – Puller Sets

As an Amazon Associate I earn from qualifying purchases.

1. GearWrench

#ad

41710, GEARWRENCH 3 Pc. Rear Axle Bearing Puller Set

#ad
GearWrench #ad - Includes 3 pullers for greater versatility. Rear-axle bearing puller set for use with most domestic cars. Packaged in durable, blow-molded case with easy-to-use instructions. Removes semi-floating rear axles. Lifetime warranty.
BrandGearWrench #ad
ManufacturerKD Tools #ad
Height2.5 Inches
Length12 Inches
Weight4 Pounds
Width6 Inches
Part Number41710
Model41710

2. OEM TOOLS

#ad

Works When Other Tools Don’t | Includes Instructions & Carrying Case, OEMTOOLS 27202 Rear Axle Puller Set | Pull Rear Axle & Bearing for Axle Replacement & Repair | Slide-Hammer Powered for Extra Pull

#ad
OEM TOOLS #ad - Comes in a sturdy blow-mold storage case. Slide hammer power pulls many flange type rear axles as well as axle bearings. Use for flange-type rear axle and bearing removal on most late model passenger cars and light trucks. Tool includes instructions and parts diagram. 3/4-inch safety nut, hook, slide hammer, 1-1-7/8-inch adapter, 1-5/16-2-3/8-Inch adapter, 3/8-inch slide rod-18-inch, 1-3/8-2-7/8-Inch adapter, web plate.
BrandOEM TOOLS #ad
ManufacturerGreat Neck Saw #ad
Height2.9 Inches
Length20.1 Inches
Weight10.55 Pounds
Width12 Inches
Part Number27202
Model27202
WarrantyOEMTOOLS 90 Day

3. Performance Tool

#ad

Performance Tool W89326 Rear Axle Bearing Puller Set

#ad
Performance Tool #ad - The specially designed pullers allow for the removal of semi-floating rear axle bearings by firmly seizing and evenly extracting the bearing. This set includes three pullers for the applications listed below. Those tools decrease damage and increase the number of applications. Use with 5/8-inch - 18 UNF thread slide hammer.
BrandPerformance Tool #ad
ManufacturerWilmar Corporation #ad
Height0 Inches
Length0 Inches
Weight2.45 Pounds
Width0 Inches
Part NumberW89326
ModelW89326

4. OEM TOOLS

#ad

OEMTOOLS 27037 3.75/4.5 Axle Puller

#ad
OEM TOOLS #ad - Yoke and bolt are Threaded 5/8 Inch x 18. Fits most domestic and Import Vehicles. Heat teated Pressure Screw for Toughness.
BrandOEM TOOLS #ad
ManufacturerGreat Neck Saw #ad
Height3.7 Inches
Length6.6 Inches
Weight2.95 Pounds
Width4.8 Inches
Part Number27037
Model27037
WarrantyOEM Limited Lifetime

5. OEM TOOLS

#ad

OEMTOOLS 27129 Rear Axle Bearing Remover Set

#ad
OEM TOOLS #ad - For use with the oemtools #27033 slide hammer Puller or Any 5?8 Inch x 18 Thread. Comes in sturdy Blow Mold Case. Black Oxide Finish.
BrandOEM TOOLS #ad
ManufacturerGreat Neck Saw #ad
Height2.7 Inches
Length8.5 Inches
Weight2.75 Pounds
Width5.9 Inches
Part Number27129
Model27129
WarrantyOEMTOOLS Limited Lifetime

6. Performance Tool

#ad

Performance Tool W1270 Ford/Gm 4 Wheel Drive Lock Nut Tool

#ad
Performance Tool #ad - Heavy duty chrome moly alloy steel construction. Heavy duty chrome moly alloy steel construction. For use with 1/2-Inch drive tool. For quick and easy removal and installation of 6 slot front axle lock nuts.
BrandPerformance Tool #ad
ManufacturerWilmar Corporation #ad
Height1.87 Inches
Length1 Inches
Weight1.25 Pounds
Width6.75 Inches
Part NumberW1270
ModelW1270

7. GearWrench

#ad

GEARWRENCH 6 Pc. Spindle Nut Set, 41660D

#ad
GearWrench #ad - Includes blow mold case for storage and organization. 3910d - removes front spindle to access needle bearing when lubricating and aligning front wheels; 5/8"-18 fine thread permits use with slide hammer; fits spindle thread sizes 2"-16, and 38mm-15; full-size GM, Ford, 1”-5/8"-16, and Jeep with Dana front axles". Large 4wd spindle puller 3910D shown third from left is included in the set but is no longer available individually.

Use with a torque wrench, ratchet, or breaker bar. 3911d - toyota 4-lug locknut socket; services high-torque locknuts on Toyota 4WD vehicles having free-wheel lock out hubs: 1995-newer Tacoma; 1996-newer T100 and 4Runner; not for 2-wheel drive vehicles. 6 chrome vanadium steel 1/2" drive sockets are for most 4WD SUV's and light truck axle locknut applications". 3937 - 4-lug socket for removing and installing 4-slot front axle locknuts on 1993-newer ford ranger, bronco ii, 3/4-, and explorer with manual hubs; 1995-newer f-series 1/2-, and 1-ton trucks and full-size Bronco with manual hubs; 1959-85 F-series 1/2- and 3/4-ton trucks and full-size Bronco; 1960-90 GM 1/2-ton trucks and full-size Blazer/Jimmy; 1969-72 International 1/2-Ton trucks; 1969-89 Dodge 1/2-ton trucks with manual hubs.3

3195 - ford 4-lug locknut socket for high-shear rotating nuts on 1985-newer F-250 and F-350 truck rear axles, and Dana 80 rear axles of Ford Super Duty trucks. 2467 - 4-lug socket for removing and installing 4-slot front axle locknuts on 1986-newer F-series 1/2-ton trucks, full-size Bronco with Dana 44 axle, 1984-92 Ford Ranger, and Bronco II with manual hubs and Dodge trucks.2770d - 6-lug socket for removing and installing 4-slot front axle locknuts on 1978-84 Ford F-series 4WD heavy-duty 3/4- and 1-ton trucks; 1973-81 GM 4WD 3/4- and 1-ton trucks.
BrandGearWrench #ad
ManufacturerKD Tools #ad
Height2.9 Inches
Length13.4 Inches
Weight2.68 Pounds
Width10 Inches
Part Number41660D
Model41660D
WarrantyStandard Limited Lifetime

8. OEM TOOLS

#ad

OEMTOOLS 27059 Pilot Bearing Puller Attachment

#ad
OEM TOOLS #ad - Puller inserts behind bearing to allow it to be safely hammered out with the slide hammer. Made in Taiwan. Designed for professional auto mechanics and heavy duty applications. Pull the bearings and bushings on starters and generators.
BrandOEM TOOLS #ad
ManufacturerGreat Neck Saw #ad
Height1.3 Inches
Length10.4 Inches
Weight0.85 Pounds
Width3.4 Inches
Part Number4623170
Model27059
WarrantyOEM Limited Lifetime

9. WINMAX TOOLS AUTOMOTIVE

#ad

WINMAX TOOLS AUTOMOTIVE 16pc Blind Hole Pilot Bearing Puller Internal & Extractor Remove w/Slide Hammer

#ad
WINMAX TOOLS AUTOMOTIVE #ad - For both the professional and diy use. And you will receive it very soon. The items you ordered will be shipped out in 1-2 business day from Los Angeles,CA or New Jersey, NY.

One slide hammer assemble 2. 5 jaws. Form blind housings. For removal of Pilot Bushes Bearings etc. Thread:m10×1. 5p, m10×1. 5p, m8×1. 25p, m10×1. 5p m6×1. 0p 10 x collects segment grip type 8-11mm 12-17mm 13-23mm 18-23mm 24-29mm 30-34mm 34-38mm 39-43mm 44-48mm 49-53mm 54-58mm. Screw adaptors m10x1. 5p, m10x1. 5p/m8x1. 25p, m10x1. 5p/m6x1. 0p 1 x counter stay puller. Split collet type blind / internal /Bearing Puller Collets are made from chrome molybdenum steel Turn and they expand to grip the inner bearing race.
BrandWINMAX TOOLS AUTOMOTIVE #ad
ManufacturerWinmax #ad
Part NumberGeneric
Model4333093963