As an Amazon Associate I earn from qualifying purchases.








With this hardware installation kit you can install knobs and pulls, and drawer slides with accurate, concealed hinges, repeatable results. Cabinet hardware jig: the Kreg Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls`.
1. KREG
#ad
Kreg KHC6 Kreg Wood Project Clamp With Automaxx, 6 Inch
#adKREG #ad - Large, non-marring pads evenly distribute clamping force. Handheld clamps for Kreg Joinery, general clamping, project assembly, and more. Works with kreg jig r3 clamp Pad Adapter, as well as with Kreg Portable Base.More information #ad
Brand | KREG #ad |
Manufacturer | KREG TOOL #ad |
Height | 1.75 Inches |
Length | 16.25 Inches |
Weight | 1 Pounds |
Width | 5.12 Inches |
Part Number | KHC6 |
Model | KHC6 |
More information #ad
2. KREG
#ad
Kreg Automaxx 5 in. x 6 in. D Wood Project Clamp 450 lb. 1 pc.
#adKREG #ad - 2 pack, 6 inch Wood Project Clamp. 2 pack, kreg tool khc6 kreg wood project Clamp With Automaxx, 6". Handheld clamps for Kreg Joinery, project assembly, general clamping, and more.More information #ad
Works with kreg jig r3 clamp Pad Adapter, as well as with Kreg Portable Base. Large, non-marring pads evenly distribute clamping force.Brand | KREG #ad |
Manufacturer | Kreg Tool Co #ad |
Height | 16.25 Inches |
Length | 1.75 Inches |
Weight | 1.85 Pounds |
Width | 5.25 Inches |
Part Number | KHC6 |
Model | KHC6 |
More information #ad
3. KREG
#ad
Kreg KBC6 Automaxx Bench Clamp, 6 Inch
#adKREG #ad - Adjusts automatically to match material thickness. 6" reach 152mm; clamps materials up to 5" thick 127mm. Easy-to-regulate pressure with a simple thumbscrew.More information #ad
Brand | KREG #ad |
Manufacturer | KREG TOOL #ad |
Height | 1.25 Inches |
Length | 16.12 Inches |
Weight | 1.62 Pounds |
Width | 5.12 Inches |
Part Number | KBC6 |
Model | KBC6 |
More information #ad
4. KREG
#ad
Kreg Tool, Premium Face Clamp
#adKREG #ad - Holds projects in place. Ensures perfectly flush joint lines. Clamps with moderate pressure. 3-1/4" reach. Use with pocket-hole systems.More information #ad
Brand | KREG #ad |
Manufacturer | Kreg Tool Inc #ad |
Height | 8.25 Inches |
Length | 9 Inches |
Weight | 3 Pounds |
Width | 32.5 Inches |
Part Number | KHC-PREMIUM |
Model | KHC-PREMIUM |
More information #ad
5. KREG
#ad
Kreg KHC-MICRO Face Clamp, 2"
#adKREG #ad - 2" 51mm reach; clamps materials up to 2-1/4" 57mm thick. Compact size fits easily into tight spaces. Helps create a flush joint during pocket-hole assembly.More information #ad
Brand | KREG #ad |
Manufacturer | Kreg #ad |
Height | 1.75 Inches |
Length | 9.25 Inches |
Weight | 0.72 Pounds |
Width | 5 Inches |
Part Number | KHC-MICRO |
Model | KHC-MICRO |
More information #ad
6. Kreg
#ad
Blue, Kreg KMA2685 Rip-Cut Circular Saw Guide
#adKreg #ad - Take your saw to the material instead of having to take your material to the saw. Use the oversize edge guide for precise control throughout the cut.More information #ad
Cut multiple pieces to the same size With just one setup. Make rip cuts and crosscuts up to 24" Wide. Eliminate need for marking, measuring, and layout lines.Brand | Kreg #ad |
Manufacturer | Kreg #ad |
Height | 2.5 Inches |
Length | 30.88 Inches |
Weight | 2.45 Pounds |
Width | 8.75 Inches |
Part Number | KMA2685 |
Model | KMA2685 |
Warranty | 90 day warranty |
More information #ad
7. KREG
#ad
Kreg KBC3-SYS Bench Clamp System
#adKREG #ad - Includes 3" 76mm bench Clamp, Clamp Plate, and mounting hardware. Clamp automatically adjusts to match material thickness. Anodized-aluminum plate mounts flush with work surface.More information #ad
Brand | KREG #ad |
Manufacturer | Kreg #ad |
Height | 2.12 Inches |
Length | 13.12 Inches |
Weight | 1.94 Pounds |
Width | 6.25 Inches |
Part Number | KBC3-SYS |
Model | KBC3-SYS |
More information #ad
8. KREG
#ad
5mm Drill Bit and 2 3" Face Clamps, Concealed Hinge Jig, Kreg Drawer Slide Jig with Cabinet Hardware Jig, Shelf Pin Jig 1/4 Drill Bit
#adKREG #ad - Contains everything you need to install cabinets and shelves. Two 3" face clamps to hold everything in place while building your cabinets and shelves. Hardware installation kit: four easy-to-use jigs plus two bonus Clamps in one specially-priced kit.More information #ad
Extra shelf pin bit included for making 1/4 or 5mm shelf pins. With this hardware installation kit you can install knobs, drawer slides & Shelf Pins with accurate, concealed hinges, pulls, repeatable results.Brand | KREG #ad |
Manufacturer | Kreg Store #ad |
Height | 7.9 Inches |
Length | 17.3 Inches |
Weight | 5.18 Pounds |
Width | 13.3 Inches |
Part Number | KHISLIDEPULLHK2 |
More information #ad
9. KREG
#ad
Drawer Slide Jig with Cabinet Hardware Jig with Concealed Hinge Jig and Two 2" Face Clamps, Kreg Tool Company
#adKREG #ad - Hardware installation kit: three easy-to-use jigs plus two bonus Clamps in one specially-priced kit. Concealed hinge jig: the Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges.With this hardware installation kit you can install knobs and pulls, and drawer slides with accurate, concealed hinges, repeatable results. Cabinet hardware jig: the Kreg Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls`.
More information #ad
Drawer slide jig: the Drawer Slide Jig takes the guesswork out of installing drawer slides. Classic 2-inch face clamp: classic 2-inch face Clamps are designed for creating perfectly flush Kreg Joints, and they work great for lots of other shop and project tasks that require solid clamping without marring.Brand | KREG #ad |
Manufacturer | Kreg #ad |
Height | 9.1 Inches |
Length | 9.1 Inches |
Weight | 1 Pounds |
Width | 9.1 Inches |
Part Number | KHI-PROMO-19 |
More information #ad