Top 9 PWM to 0-10V – Electrical Motor Controls

As an Amazon Associate I earn from qualifying purchases.

1. WOWOONE

#ad

WOWOONE 1Pcs PWM to Voltage Module 0%-100% PWM to 0-10V Voltage Suitable for Signal Interface Switching for PLC or Other Industrial Control Boards

#ad
WOWOONE #ad - The module is small, easy to carry and easy to use. Easy to operate, can be fine-tuned by potentiometer. Adjust the output voltage by adjusting the PWM duty cycle.

It can be used to switch the signal interface of PLC or other industrial control board. The module is small in size and easy to apply in different places. Pwm signal receiving frequency range: 1KHZ-3KHZ. Using mcu embedded technology. Module working voltage: dC 12V-30V; current greater than 100mA. Select the pwm signal input level range by short circuit. The pwm to voltage module converts pwm digital signals to 0 to 10v analog signals.
BrandWOWOONE #ad
ManufacturerWOWOONE #ad

2. Colorful-USA

#ad

0-10v LED Dimming Controller 0-10V Analog Dimming Signal To Constant Voltage PWM 5A x 3CH RGB

#ad
Colorful-USA #ad - Optical isolation protection for input & output. Max output 5a*3ch, 15A in total. Compatible with many brand dimming systems. Working voltage from DC12V~DC24V. 0 - 10v to pwm dimming signal conversion.
BrandColorful-USA #ad
ManufacturerColorful-USA #ad
Height2.2 Inches
Length5.71 Inches
Width2.56 Inches

3. Laser-makers

#ad

PWM To Voltage 0-5V/0-10V Duty Cycle 0-100% Linear Conversion Transmitter Module

#ad
Laser-makers #ad - We will ship it within 1-2 days, it may takes 7-12 days to USA by Standard Shipping. Output voltage: 0v ~ 5v / 0V ~ 10V. Input voltage range : 4 ~ 24V. Working voltage: 9V ~ 24V.
BrandLaser-makers #ad
ManufacturerLaser-makers #ad
Part NumberD329-PWM-5/10V-LM

4. No-branded

#ad

No-branded Module PWM to 0-10V Voltage PWM to Voltage Conversion Module 0-100% Test Module YAGMGUS

#ad
No-branded #ad - Select the pwm signal input level range through short cap;. Using single chip embedded technology;. Peak 4. 5v to 10v level, jumper inserted at 5v. This level of signal mainly for conventional industrial control card such as MACH3 board Card 5V CPU interface;. 4. 3. 5. Module is small, easy to carry and use;. Easy to operate, can be fine-tuned by potentiometer;. 2. 1.
BrandNo-branded #ad
ManufacturerYAGMGUS #ad
Weight0.22 Pounds

5. globeagle

#ad

PWM to Voltage 0-10V Adjustable Digital Analog Signal Converter Module PLC

#ad
globeagle #ad - Pwm converts digital signals into analog signals 0 to 10V. The input digital signal can be a 0%-100% PWM signal at 5V or 24V level. It can be used for switching of industrial control panel PLC or other signal interface. The module is easy to connect and use. The output analog signal can be 0-10V voltage or 0-5V voltage.
Brandglobeagle #ad
Manufacturerglobeagle #ad
Part Number266493

6. ATX LED

#ad

DC Powered, PWM and Dual 0-10v outputs for Fixed or tunable White LEDs, AL-WS-010v from ATX LED, with DALI Master and DT8, 0 to 10 Volt Decorator Style Dimmer Wall Switch

#ad
ATX LED #ad - Pmw output for PWM LED drivers. Expert tech support from Texas 512 377 6052. For fixed or tunable white systems, DALI DT8 support and dual 0-10v outputs for Tunable White direct drive. Decorator style wall switch with dual 0-10v DC outputs to connect with 0-10v fixtures. Powered from 24 volt or dali bus, switch or DALI addressable, dali interface for large installations, On Board DALI Master.
BrandATX LED #ad
ManufacturerATX LED #ad
Part NumberAL-DALI-010v
ModelAL-DALI-010v

7. FTVOGUE

#ad

FTVOGUE 3.3V PWM Signal to 0-10V Voltage Converter D/A Digital-Analog PLC Conversion Module

#ad
FTVOGUE #ad - The output analog signal can be 0-10V voltage. This module can convert 0-100% PWM digital signal into analog signal. Widely used in signal interface switching of PLC, single chip or other industrial control board. The power supply has reverse polarity protection function. The input digital signal can be a 0-100% PWM signal of 3. 3v level.
BrandFTVOGUE #ad
ManufacturerFTVOGUE #ad
Height0.79 Inches
Length1.77 Inches
Weight0.04 Pounds
Width1.77 Inches
Part NumberFTVOGUEzydbu0amk6

8. Fafeicy

#ad

Fafeicy 3.3V PWM Signal to 0-10V Voltage Converter D/A Digital-Analog PLC Module for Signal Interface Switching

#ad
Fafeicy #ad - The input digital signal can be a 0-100% pwm signal of 3. 3v level. Reliability: the power supply has reverse polarity protection function. The pwm signal receive frequency range of the product is 100HZ-3KHZ 1-3KHZ is recommended.

The output analog signal can be 0-10v voltage. The output power of the product is about 10MA, and the mounting method is 4 * M3 screw hole. Give you a safe and stable working environment. The product input 0-100% PWM signal of 3. 3v level, and output 0-10V voltage. Applocation: the product can be widely used in signal interface switching of PLC, single chip or other industrial control board. This module can convert 0-100% pwm digital signal into analog signal.
BrandFafeicy #ad
ManufacturerFafeicy #ad
Height0.79 Inches
Length1.77 Inches
Weight0.04 Pounds
Width1.77 Inches
Part NumberFafeicyaefgbx09gy

9. wosume

#ad

1-3KHZ 5V PWM Signal to 0-5V/10V Voltage Converter D/A Digital-Analog PLCK5P-10V, wosume PWM Signal to Voltage Converter

#ad
wosume #ad - The input digital signal can be a 0-100% PWM signal of 5V level. The output analog signal can be 0-10V voltage or 0-5V voltage. This module can convert 0-100% PWM digital signal into analog signal. Widely used in signal interface switching of PLC, single chip or other industrial control board. The power supply has reverse polarity protection function.
Brandwosume #ad
Manufacturerwosume #ad
Height1.18 Inches
Length1.97 Inches
Weight0.09 Pounds
Width2.95 Inches
Part Numberwosume5z3thc0gik-02